Bleeding an E36 Clutch With a Syringe! Secret Trick

No video

Bleeding an E36 Clutch With a Syringe! Secret Trick

Рет қаралды 21,476

Күн бұрын

I saw this trick on another video and figured I'd give it a shot. It seemed to work just fine and is probably possible with most cars.
~Follow My Instagram~
/ its_black
Thanks for watching! Please Subscribe ITS FREE!
*Amazon Links to all my most used gear*
Video:
DJI Osmo Pocket: amzn.to/3jWYxc8
Osmo Wide Angle Lens: amzn.to/311mZQV
Osmo Scroll Wheel: amzn.to/2Xf0map
Osmo Suction Cup: amzn.to/3ggPWyE
Go Pro Hero 7 Black: amzn.to/2EwdsJP
Go Pro Hero 6 Silver: amzn.to/3fnwK13
Photos:
Nikon D750: amzn.to/3gfrtcR
Tamron 24-70mm F2.8: amzn.to/2Etz9dw
Nikon 85mm F1.8: amzn.to/3jSCBPn
Nikon 50mm F1.4: amzn.to/33bFdSn
Sigma 14mm 2.8: amzn.to/3hNKcfW
Garage and Tools:
Tire Loft: amzn.to/2PhnnVH
Auto-leveling Laser Level: amzn.to/3fhaBkS
4 in 1 Stud Finder: amzn.to/2Xffi8v
$89 Electric Ratchet: amzn.to/2CY0Yum
$29 Cordless Rotary Tool: amzn.to/2D7DVwZ

Пікірлер: 58

@JoseAlvarez-vz1mr 11 ай бұрын

Ive watched this about 20 times now , he explains smoother then other guy. Chill dude haha , hopefully it works for me

@DuelistMandroid Жыл бұрын

This worked great! Make sure and follow the Bentley manual steps to also remove and bleed the slave cylinder. Page 210-2 in the Bentley book.

@user-gi4nc7ho1m 10 ай бұрын

Bro! I built a race truck. Swapped to a 6.2 motor, and a custom 5 speed transmission. The transmission was also custom built. The gear shifter has always vibrated and the clutch engaged very low. It was always a soft clutch. I thought that was how they designed it. One day...boom clutch had no pressure and won't go in gear. I see the reservoir is bone dry. The slave and master were new, with braided line. I do this exact thing but with a tiny syringe. Brand new clutch and shifter now. Clutch engagement is where it should be. Great pressure, and shifts like a dream. It takes a while to get all the air out but literally cost me nothing. If your in a bind... This works great.

@DadBodGarage 3 жыл бұрын

I absolutely need to do this. I have some pedal on my 6 puck, but not anywhere near where it should be. plus, i replaced the factory line with a stainless braided.

@skylined5534 2 жыл бұрын

Brilliant practical demo and glad you kept the original initial disappointment where it didn't improve much, gives us fellow spanner twirlers a bit of hope and realism! Subbed!

@itsBlack 2 жыл бұрын

I also try to show the real-ness in my videos. Sometimes stuff isnt perfect like a tv show lol

@alcantarainterior8078 Жыл бұрын

My man, not all heroes wear caps. I’m gonna do this on my e30💪🏼 💪🏼

@ChrisBaunExtras Жыл бұрын

Just dropping in to say thank you! I was struggling for a few hours before finding your video. I was so hyped after feeling so defeated lol

@user-gi4nc7ho1m 10 ай бұрын

I forgot to mention that I had no choice but to do it like this. My situation was I test drove my truck for the first time after the motor swap. Re wired EVERYTHING from sound system to power windows to lights. Drove a long way because everything was working great. I go and eat lunch. When I got back the clutch had no pressure. Truck has a 5/8 drop on 24's. No way I could get under the truck without a tow or someone bringing tools. My wife brought the tube and syringe.

@net55588 2 жыл бұрын

Thanks a lot, same problem and this works fine for E30, I tried others methods without luck, but this works pretty well and quickly

@steerfromtherear1000 3 жыл бұрын

Just had this pain changing master on my e32. U can back feed it from the slave the same way too

@mon3pit 3 жыл бұрын

DIY nice. Need to try it myself ty

@grantjohnstone5101 Жыл бұрын

This really works thanks

@Jmp1019 3 жыл бұрын

I did this process maybe 4x to make sure all the air was gone after doing a new SS clutch line, slave, and master. Used the same syringe as in the video. Now I get a sponge soft pedal after hard driving. The firmness eventually comes back but clutch pedal gets softer after hard driving…guessing there’s still air in there? I checked for leaks and nothing, fluid level is fine

@zytor793 2 жыл бұрын

Same

@DuelistMandroid Жыл бұрын

Bentley manual page 210-2 Follow the procedure to bleed your slave cylinder.

@ThorsDecree 5 ай бұрын

I spent about a week on my Honda trying everything including vacuum pumping short of pulling my master cylinder off which is a total pita to access. I saw you and two other guys use an oil syringe for this so I'm going to try this and I'll let you know how it goes!

@michaelcliffe562 5 ай бұрын

How did it go?

@ThorsDecree 5 ай бұрын

@@michaelcliffe562 I ended up forcing fluid through the slave bleeder with about 2atm of pressure with the syringe while simultaneously pulling about 2atm of vacuum via the reservoir line that feeds the master cylinder. It was only when I did _both_ simultaneously that I started bleeding off significant amounts of air. As I suspected, I had enough of an air pocket in the master cylinder that it was preventing the fluid in the reservoir from flowing. Just pushing or pulling from a single direction only produced enough pressure to compress the bubble. Now my clutch pedal is probably at least as firm as it was 26 years ago :D Definitely recommend the syringe. If I had to choose only a vacuum pump or only a syringe, I'd go with the syringe. Using it without the vacuum, I was able to get _some_ clutch pressure, but not enough to fully actuate the slave piston. I _never_ thought I'd spend over a week bleeding a basic hydraulic system like that. My neighbor's an engineer and he was starting to question his sanity over the whole thing too haha. Didn't think I'd end up at the horse store looking for tools for my car lol. I guess horses are technically hydraulic systems, now that I think about it.... Hope that helps if you're having the same issue.

@michaelcliffe562 5 ай бұрын

@@ThorsDecree That is awesome! Thanks so much for the answer! I'm from Germany and I've been trying to bleed the concentric slave cylinder in my FWD Renault Clio for...well, about a week now! I've vacuum bled it, pressure bled it, reverse bled with vacuum and pressure from top to bottom and vice versa and nothing works! So this is the next thing I'm going to try as I'm convinced that the air bubble isn't even in the slave cylinder anymore.. I've ordered a sringe kit on Amazon and I'll let you know after easter. Again thanks alot for the reply!

@ThorsDecree 5 ай бұрын

@@michaelcliffe562 as long as you have verified that fluid can flow, that the line isn't blocked, it should just be a matter of getting the right amount of pressure. Depending on how your master cylinder is set up, jack up the front of the car or park on a hill. It'll help you get air out of the master cylinder. Good luck! Btw, if you have any farm stores around, I used a horse syringe. Same tool, but the livestock store sells it for 1/5 the price an auto parts store charges. Good luck, brüder. Let me know how it goes, I can relate to the struggle haha.

@sirgilang90z 2 ай бұрын

@@ThorsDecree yah me too, my damned volvo 740 slave is blown and a week later my master cyl spring is broken into two pieces, after fiddling and fixing the broken spring and seal clutch still not working and i am trying bleed from the slave cylinder. hope this method works cuz ive been working on it for 3 weeks just bleeding, i might tow this sucker to the shop if it wont work i just got no time.

@danl4222 2 жыл бұрын

Useful .. I just did a swap. I wish I had thought of that. The clear tube makes wha't happening visible. In the final stages I wonder if removing the plunger would make sense, because at that point the air will float up and out anyway. I ended up unscrewing the slave cylinder and rotating the bleeder "up" instead of "down" (its operating position) That worked .. and I could see bits of air blowing out as my helper & I did that dance of "Open, shut etc "". What you did is better because one guy can do it. Tks!

@inanimateobject1596 2 жыл бұрын

Helped me so much!!

@livingthelife8443 Жыл бұрын

so do i clamp the line shut before i reattach the reservoir

@pushtherear2890 Ай бұрын

I know this is a old video black but did you lose pressure once you put the hose back on the master?

@itsBlack Ай бұрын

No after putting the hose back I just topped off the reservoir again and felt the same

@pushtherear2890 Ай бұрын

@@itsBlack thanks homie 👊🏻

@Vgk36 Жыл бұрын

Hahaahah !! HELL YEAH!!! 2:56

@chickenjoeclark 3 жыл бұрын

Heck yea man..!

@hotjonmw90 2 жыл бұрын

Hopefully this will work on the z3 also

@TheRealIsaiahWake 5 ай бұрын

Where did you get syringe?

@jonathanscottpenny Жыл бұрын

Where did you find the syringe

@jaydenhayes8083 Жыл бұрын

Bro got a life supply of break fluid

@ES-REDROT Жыл бұрын

Dude! Drop the link to this syringe!

@rubenrobles7275 3 жыл бұрын

leopard headliner?

@jalenrodriguez4733 11 ай бұрын

by any chance did you do the clutch slave cylinder? If so did you bleed it by hand first or just let it be and started the bleeding with the syringe? trying to get my e34 back the road but this job is a pain in the ass

@SleekM3 8 ай бұрын

What did you end up doing?

@jalenrodriguez4733 7 ай бұрын

@@SleekM3 i took it to someone else thinking i was doing it wrong but it turned out i needed a whole clutch job bc something got bent and wasn’t keeping any tension (assuming the pressure plate was worn)