Blender for Production - Blender to NUKE Workflow - 01 Set up a Blender to NUKE Pipeline

Рет қаралды 22,089

3 жыл бұрын

In this tutorial, we will start by looking into the Blender Rendering system and how to render still multipart EXRs and also animations as EXR sequences. Then we will define our Light & Data passes for NUKE and talk about the concept of View Layers / Render Layers. After importing a first EXR to NUKE we discuss several problems we will have now with that. So, back in Blender, we start setting up a reliable Rendersetup with predefined Layer names and splittings. Also, we talk about making presets for this workflow in Blender and NUKE and save Libraries for often used setups. In the end, we will learn how to manipulate single channels before exporting to EXRs for NUKE.
If you have questions or topics, which should be added, please let me know.
If you want to support me for publishing more free tutorials you could join my Patreons:
👉 / pixeltrain3d
or give me a fast Coffee time Tip:
👉 PayPal: paypal.me/pixeltrain
Want to start learning Blender Fundamentals with Helge?
👉 • Publication Trailer - ...
These topics are covered:
How to render and save a still EXR from Blender
Defining the rendering target panel
Understanding the Image Editor options
File Settings for EXRs (half-float / full float)
How to render Animations and save an EXR sequence directly
Defining Renderpasses / AOVs in the View Layer Properties
Lightpasses, Datapasses & Cryptomatte
Analysing the Passes in the Image Editor
Reading in a Blender EXR to NUKE
Problems of the Blender EXR in NUKE
Renderlayers and empty layers
Missing Cryptomatte Layers
Blender Compositor Workflow
Understanding the Render Layers Node
Defining Output Slots in the File Output Node
Making a Node Group
Using Libary Blend Files
Exporting the Passes for NUKE
Manage more Render Layers
Correcting (Denoising) a single pass before exporting
This tutorial series „Blender for Production“ focuses on Blender 2.9 as a full Production Suite for (Indie) 3D- & VFX Productions. In these tutorials, I will explain how to work with the different Modules of Blender 2.9 and how they are connected to each other. I will give you an introduction to the specific functionalities, but also the production context and workflows, which can help you to use Blender in your productions.
Helge Maus teaches 3D- & VFX Applications for 20 years. His focus lies on VFX, but he also works with many studios and agencies from different visualization areas.
And if you want to have the exercise files here is the Gumroad link. These files are available for free for my Patreons:
gum.co/VWFzTN
Find more information on www.pixeltrain.net
KZfaq: / pixeltrain3dvfxtrainings
Twitter: / pixeltrain
Mastodon: mastodon.art/web/@pixeltrain3d
Instagram: / pixeltrain3d
LinkedIn: / pixeltrain
Artstation: www.artstation.com/pixeltrain

Пікірлер: 75

@madlookzvfx 5 ай бұрын

This is one of the gem tutorial for Nuke compers!

@chanruzzi Жыл бұрын

Incredibly complete tuto, thank you for taking the time to make it and sharing it with us! It now seem kind'a obvious but making output groups with correct settings and naming conventions for appending to any new projects was a great idea. Thanks again!

@raimuhammaduzairfareed7628 3 жыл бұрын

Hi dear thank you very much for starting this series (Blender to nuke). I also requested you in comments section under a previous video for making detailed classes on blender to nuke workflow. And you did this. Thanks again for making this.

@pixeltrain3d 3 жыл бұрын

Yes, more will come in the next weeks. I've already captured another one, hope it will be ready Friday :-)

@raimuhammaduzairfareed7628 3 жыл бұрын

@@pixeltrain3d Thank U very much dear for your efforts

@anshudil3735 3 жыл бұрын

@@pixeltrain3d thank you so much for the classes ❤️ from India 🇮🇳

@AlexandersArtwork 3 жыл бұрын

Nice to see your new content.

@drabodows 3 жыл бұрын

Very helpful. Thank you.

@alexsender4986 2 жыл бұрын

very profound thank you

@ertar0 Жыл бұрын

amazing, thank you very much!

@stevenmartillo2637 2 жыл бұрын

gracias maestro!

@smoothprox 3 жыл бұрын

Great time saver. Works with Nuke 13 native Cryptomatte. Had an issue with the old init.py and menu.py after install. Bypassed them and it's working fine. Thanks!

@pixeltrain3d 3 жыл бұрын

Cool, have to install NUKE 13 next week ;-) This week was too busy.

@Venkatramanan11586 Жыл бұрын

Thank you so much🤩

@pipeliner8969 3 жыл бұрын

oh nice! very handy!

@robertYoutub 2 жыл бұрын

thank so much, wonderful tutorials! I just run into an issue… somehow the layer wanted name is longer then Blender allows me.

@BeratTurkbkmaz 3 жыл бұрын

AWSOME tutorial. Thanks man. I wonder How can I change easly the output names in all outputs for versioning? Is there any way in the Blender or must I have use an external manager?

@broke420. Жыл бұрын

This is awsome ! Thank you sooo much mate. one thing.... isnt it faster if you setup your node group and safe it as you start up file ? So you dont have to append them ? Just wondering

@buianhman5771 9 ай бұрын

Thank you

@pekosCabinet 2 жыл бұрын

Thank you!！

@pixeltrain3d 2 жыл бұрын

You're welcome!

@mhorganmanaois2462 2 жыл бұрын

Awesome tutorial. I just want to ask how do you denoise all the render passes because when I see the render passes they are all noisy except the for the combined? Thank you

@ronydey2696 2 ай бұрын

Great

@marcagray 3 жыл бұрын

Very nice. Now I just need to find out how to make a position pass AOV.

@pixeltrain3d 3 жыл бұрын

Watch the third video of this series ... ;-)

@vin77ever Жыл бұрын

Thank you so much... Can I export light groups to nuke?

@turjoturjo7422 3 жыл бұрын

Wooowwww... U r so much helpful! Thank u so much!! Many of my problems are solved: E.g. - compositing nodes from one blend file to another - cryptomatte from blender to nuke I'm waiting for- 1. How to connect all those lines to file output node at once... 2. How to export light passes, i mean- separate lights in separate layers, just like maya/c4d, so that i can change the color and intensity of each lights in nuke. (but not using viewlayers because it will increase render time, 5 different lights will need setting up 5 viewlayers and rendering 5 times.)

@pixeltrain3d 3 жыл бұрын

Hi, great to hear. Yes, great additions for the next two parts.

@turjoturjo7422 3 жыл бұрын

@@pixeltrain3d I'm so much excited about your next part!!! ❤️

@turjoturjo7422 3 жыл бұрын

Another addition needed: how to properly use "vector" and "Depth" passes.. Which one to combine first nd etc...

@alimoworld8295 3 жыл бұрын

Great thank you sir. can i use denoiser for each pass?

@pixeltrain3d 3 жыл бұрын

Sure, you can.

@kevinschwaiger8325 2 жыл бұрын

Hello, for an animation I just need to do this for the first frame and use ".####.exr" in the Path-naming convention and it wil do the same for all other frames? kr

@jcurry_clips8580 Жыл бұрын

whats the script you use or do you have a tutorial?

@SteveWarner 3 жыл бұрын

Extremely helpful video. Thanks for posting. I have a question about Cryptomattes in Nuke. I've tried saving mlEXR from the Output tab in Blender but Nuke 12.2v5 with Cryptomatte version 1.2.8 but it wasn't seeing the metadata. The files work with Cryptomatte in Natron just fine but Nuke isn't liking them. I was excited to see you working in the Compositor as that's my preferred way to output. However I still can't get Cryptomattes out of Blender and into Nuke. I've set things up exactly as you have. Any ideas as to what might be going wrong? Also, which version of the psyop plugin are you using?

@SteveWarner 3 жыл бұрын

Okay! I got it to work. Turns out it's Blender. Or more specifically, Blender 2.91.2. I take the same scene into 2.92 and it works flawlessly. So for anyone else struggling with this, make sure you're using 2.92, as 2.91 is jacked up for cryptomattes and Nuke.

@pixeltrain3d 3 жыл бұрын

One sidenote to that - if you add a Metadata node in NUKE you can look into these. I remember, that Blender's export didn't export the layer names correct in that. I have fixed that in that version by adjusting the names in the Metadata. Great that you found a working workflow :-) Works in 2.92 flawless as you said.

@monocore 2 жыл бұрын

This is just adorable. Do cycles even support deep?

@pixeltrain3d 2 жыл бұрын

No, it doesn't. If you really need DeepEXRs for comping them in NUKEX in a Deep Workflow you can use RenderMan for Blender. You can use the NC version to see how it works. But to be honest, I had only a handful clients in the past who really understood what Deep Workflow means, and how to use it correctly in their pipeline. The files are so large ;-)

3 жыл бұрын

Finally

@MrJemabaris 2 ай бұрын

One problem I have come across when working with multi layer EXR passes in Nuke is that when I have a scene with a shallow depth of field and run all the render passes through denoising in Blender my denoised beauty and my splitout AOVs in Nuke won't match 100% in the out of focus parts of the image. Do you have any idea how to get around that? Greets from Germany :)

@charanganesh3700 2 ай бұрын

I tried this process for after effects but it doesn't work this way

@rajeshpentakota6964 2 жыл бұрын

Render passes are used to create a realistic effect on static objects or images.But how to use render passes on moving character or and object. (maya, nuke)

@pixeltrain3d 2 жыл бұрын

Renderpasses are used for stills and also for animations. Even more in animation :-) Same technique as described.

@BeratTurkbkmaz 2 жыл бұрын

Hi. Do you know any easy way in the Blender to change file output (and folder) version number?

@pixeltrain3d 2 жыл бұрын

Hm, no, there is no version numer variable option yet. maybe with a python externsion, but haven't tested it. Maybe someone knows?

@hamatoshamatos7048 3 жыл бұрын

my question will sound stupid but why use composition software like nuke etc or even why use composition in general? not to make your scene, to play with the colors textures and effects, to light with arnold or cycles then to make an animated film simply?

@robertYoutub 2 жыл бұрын

Just two things: I have no idea why I always get an extra alpha on each output, even if I choose exr output to rgb only.. and that alpha is always empty. I run into an issue, that I did nit get an alpha at all before. Took me a while to find out Cycles has a film option, where you need to enable it. No idea why this is off by default.

@pixeltrain3d 2 жыл бұрын

Hi Robert, the first post of the RenderLayers deliver 4 Channels. I think that's the reason why we get 2 alphas. Yes, the transparent film option is a catch. I think, I've talked about that in the tutorials. Sometimes you will build everything in 3D for animation for example. So you want to see the background. If you want to compose later, you want to get rig of rid. I still sometimes forget to tick ;-)

@LarsLeonhard 2 жыл бұрын

Can I ask - what's the difference between rendering with Nuke vs. using Blender's rendering tools?

@pixeltrain3d 2 жыл бұрын

Hi Lars, Blender is able to render photorealistic or NPR with all finess. NUKE's Renderer is Scanline and is onl used to add simple elements to comp into the whole composition. So the normal workflow is, that you use your 3d application with it's render engine to render your cg plates and then finish it by compositing in NUKE. It's a hand-in-hand process.

@tomatoyaaaaa Жыл бұрын

i set the resolution 4k, one mutiexr file is 200m, i check the file in nuke,it has three denoise channel and one rgba one viewlayer_combined, my blender file output only image connect, how to remove the denoise pass,i just want rgba and mist pass

@tomatoyaaaaa Жыл бұрын

btw i use the denoise node for rgba output

@tomatoyaaaaa Жыл бұрын

nvm, i made a mistake, the two output dir name is same , so the one blender auto output overwrite the one i wanted, so i changed the output dir , so i get two .exr file, one 173m , one 24m ,so i set the 173m one to a low size .jpeg, solved it, my bad!

@vietanhnguyen5828 3 жыл бұрын

Hi I have a problem using the "File Output" node to rename the patches. It works really well with rendering an image but if I use render animation it all seems to be back to the default patch name Composite_Combined instead of RGBA. Thank you for your help

@pixeltrain3d 3 жыл бұрын

Hi, tested it with animation again. For me, it works like expected. Are you sure that you open the frame sequence which was outputed from you file output node? And that the compositor is working (use nodes is on)?

@vietanhnguyen5828 3 жыл бұрын

@@pixeltrain3d Everything is correct, sir, I have been digging up the internet for 2 days and still have no answer 0:(

@pixeltrain3d 3 жыл бұрын

Oh, I know that feeling. Would you like to send me your problem file (if it's not to big) as a link? Please write me to my email, you find it on my pixeltrain.net page.

@vietanhnguyen5828 3 жыл бұрын

@@pixeltrain3d really thanks, actually i created my own gizmo on nuke to rename the pass from blender for reuse. Anyway thanks for the help. I will research and message again when I find the error

@pixeltrain3d 3 жыл бұрын

Perfect

3 жыл бұрын

Blender fans wait part 2

@LeonErrante 2 жыл бұрын

so, if i render my open exr file secuense , with out the node groups, how can i work with the files if i dont use the nodes?. . . . :/ , i just use the out put config. . . :/

@pixeltrain3d 2 жыл бұрын

Then you have to shuffle your beauty inside of NUKE to the main RGBA Layer. Blender tens to name all the layers as a combination of View-Layer and Component, which is really anoying.

@LeonErrante 2 жыл бұрын

@@pixeltrain3d cool thanks

@perryperi 6 ай бұрын

Hi this is amazing, unfortunately I am unable to render from the file output node.. it keeps rendering from the properties panel. Any ideas? Already checked on Compositing under Post Processing :(

@pixeltrain3d 6 ай бұрын

Do you have activated "use Nodes" in the compositor Editor?

@perryperi 6 ай бұрын

Thanks for the reply.. yup got that checked on, I realised it’s rendering the scene twice.. one from the properties panel and the other from the file output! Is yours acting the same way too?

@pixeltrain3d 6 ай бұрын

Yes, the Compositing Node will output the Beauty Pass and the File Output Nodes will then output your manipulated outputs you decide.

@perryperi 6 ай бұрын

Oh damn.. there's no way to not render 2 times?

@pixeltrain3d 6 ай бұрын

It doesn't render 2 times. It's only outputing the Composite Node output and the File-Node Output.

@AdamEarleArtist 3 жыл бұрын

Setting up for blenders composiror evereytime: kzfaq.info/get/bejne/pLuohdqAut2cZYU.html Oh my goodness! Tthis video just goes to show how human I really am. How is it that I have never thought of this. hahhaah. Well done on the tut.

@raimuhammaduzairfareed7628 3 жыл бұрын

I am also a youtuber we make vfx short films . also do freelancing.