Thanks so much for your nice comment! I'm so glad the video helped you!

Wow that's awesome! I'm glad my video was helpful to you. Thanks for watching and leaving a nice comment!

You're welcome!!

Awesome! I will go check it out! I'm so glad this was useful to you!

Wow thanks for the nice comment! And you're welcome! I'm glad the video could help you!!

You're welcome!!!

You're absolutely welcome!!!!

I'm glad to hear that both tutorials worked! So when I made my animated film, I started by "rigging" the propeller for the airplane as seen in my first Blender tutorial, then after a lot of trial and error, I made the particle system to emit bullet tracers. The important thing to remember is that you have to do both these operations on the same airplane. You shouldn't run into any problems if you follow the steps, as the "rigged" propeller is its own element while the tracer particle system is a complete different one. If you need anymore help or have anymore questions, just ask!

Cool! Glad I could help!

It really helps me thank you again. I will watch every videos of yours. And keep updated to your video.

@@abrahamjunarno9395 Okay, thanks so much!

You're welcome!

Thanks! Unfortunately I am unsure about how to use a local variable. I really appreciate the feedback though!

Wow thanks! Hmm, I've honestly no idea. I guess if the tracers' physics are complex or maybe if there are a lot of them, baking would be ideal. However, I haven't actually baked the tracers at all yet. Great question though! I'll definitely keep that in mind! Thanks!

I'm glad the video helped you! As for trace emitting timing, I don't think this method allows for exact timing/intervals of the bullets. However, I recommend changing the number of bullets being fired and the emitter power to get a certain fixed rate that you like. If somehow you could measure that rate, you should be able to assign the recoil animation to that firing rate. I hope this helps you!

have you found any video about that?

Awesome! Glad to hear it!

Yes, if I remember correctly you can use keyframing for some of the particle controls to set when a gun begins firing.

Great! I'm so glad the video was helpful to you!

@@jbblenderbreakdown4668 ye i also wanted to make a short film of ww2

@@mitroiz9182 That's great! If you have any questions, feel free to let me know! Best of luck to you!

@@jbblenderbreakdown4668 yes i do need your help can you plzzz make a video of how to animate a plane fight.i also watched your plane fight animation and i loved it. can you plzz make a video pleasee😭😭.you are the only youtuber that is reply my comment. 😅☺☺

@@mitroiz9182 Ah, I understand! Right now I'm unable to upload content to my KZfaq channel due to my current work load with my job and college, but what would be easier for me and I think better for you is for us to just chat over Discord or something similar. That way you could receive live feedback and extra tips and tricks that wouldn't be in a KZfaq tutorial. I would also be able to share my screen and could show you how I made my animation!

Hmm, I'm pretty sure that with motion blur on and the camera moving and shaking as it normally would in an action sequence, it would seem like the tracers were distorted and bent in waves. While I was making my animated movie, "The Altercation", I learned about this trick and that's why at the end you can see the technique being used. But yeah feel free to experiment with the camera movement, as the tracers themselves are pretty accurate when it comes to how it was in ww2. Although the sample video in the beginning doesn't really illustrate the technique of camera movement, keeping the camera constantly moving and having it shake while the guns are firing should do the trick because of motion blur. Let me know if you need anything else!

Hmm, that is very strange. I don't think I've ever encountered that problem before. Just make sure you save the project before exiting. That way the changes you make to the scene will be saved. If you need any further help, just let me know!!

Thanks!! Sure, I will try my best! I'm not very good at 3D modeling, but I will definitely give that a shot! It's more concept modeling than putting in numbers and values, but it's not hard to make these models once you know Blender modeling basics and tools. I was planning on making a modeling tutorial anyway, so this would be a perfect topic! Thanks for the feedback!!!

It may be a little while before I can make a tutorial concerning that, but here is a good video to get started with: kzfaq.info/get/bejne/rJ1larmpnM_MqH0.html This video is more like the way I did it: kzfaq.info/get/bejne/r9BnmtKD2Zq6nmQ.html Let me know if you need anything else!

@@jbblenderbreakdown4668 thanks for the infos, and yeah I know those videos, they are very helpful, I was simply wondering if there was other ways to do it

@@nathanbarraud4349 Oh, okay. I kind of taught myself how to do it, so it's kind of hard to describe exactly what I was doing. It took me a couple of days to make just the BF 109 so, obviously, I wasn't really sure of what I was doing. I really can't think of any other way to model an airplane, but I will let you know if I come up with anything else!

@@jbblenderbreakdown4668 Thanks a lot for your accessibility !

I'm afraid not. I created this model a while back for an animated movie. I didn't really know what I was doing so I made several mistakes. I made it by trial and error and watching a few tutorials. Most of it was made by using reference images and attempting to duplicate what I saw. I did this by going into edit mode and extruding the object in the same shape as the reference image. I hope this helps a little.

Hmm!! I've never encountered this before. Maybe check to be sure you don't have a duplicate emitter in the same location emitting the opposite direction.

@@jbblenderbreakdown4668ok I will check - thank you for replying so fast!

@@jbblenderbreakdown4668 i just redid the method from the start and it now seems to work! thanks :)

Not yet, but I'm sure I could think of something. Do you mean those white streaks of smoke behind the tracers? If so, a smoke domain might work. Thanks for the great idea and I'll see what I can come up with!

@@jbblenderbreakdown4668 thanks. I think I found a way to do so without smoke sims

@@AnimatedAirlines Oh, nice!!

That's actually a really good question. I'm not sure because I haven't really used the new mantaflow in Blender. But I am pretty sure it would work!

@@jbblenderbreakdown4668 i still have to try these coming days. thanks vm

Oh, this is because you need to parent the emitter to the gun. That way the emitter will follow the gun but not be the same object.

@@jbblenderbreakdown4668 k

Yeah. This is a common problem I encountered when making my animated movie. So I tried to avoid this problem as much as I could by keeping the plane relatively stationary and using basic camera tricks to make it appear that it's moving forward. However, for certain animations I had to put a wind force field behind the tracer emitter to speed up the bullets. Hope this helps!

I didn't download this plane model; rather, I created it in Blender a while before. I didn't make tutorial about modeling it because I was unsure about what I was doing and it took me a very long time to make it.

Ok

Awesome! So the way you change the frame rate is to go under the output tab and scroll down until you see frame rate. Just change it to how you like it!

@@jbblenderbreakdown4668 thank you very much for your help and your videos great

@@doganinds Thank you! So glad to hear that it works!!

You can use an HDR image for your world setting. The link for the image that I used is actually in the video on the lower left of the screen at 0:15. Hope this helps!

@@jbblenderbreakdown4668 thx ❤️

Hmm, I'm not much of a modeller, so that might be a good request for someone like Alfa Cinema kzfaq.info/love/YTAPX2rVWHqpPjj26J1JQw I appreciate the feedback though!

@@jbblenderbreakdown4668 not modeling it's just adding the trail when the bike moves and it also bends

@@jbblenderbreakdown4668 not modeling it's just adding the trail when the bike moves and it also bends

@@jbblenderbreakdown4668 here is some C4D reference kzfaq.info/get/bejne/Zp6lqcKnutfeqYU.html

@@jbblenderbreakdown4668 mmore blender 2.5 reference read the description kzfaq.info/get/bejne/qdeXlNyExrW9fHU.html

That's a very good question, although I am unsure. I would experiment with the particle settings and see if you can find a section referring to physics. Once there, try looking for a rigid body setting, then set the rigid body to active.

@@jbblenderbreakdown4668 thank you. btw thanks for tutorial it is so usefull

@@rexwinz No problem, I'm so glad the tutorial was helpful!!!

This is very strange. Maybe adjust your Shutter slide bar and other motion blur settings. I've never encountered this issue before. Thank you for reaching out about the issue!

@@jbblenderbreakdown4668 Shutter slide bar is already at 1, and it's still the same result. Would it be fine if I send a video? And also it look s like you're using a different Blender software. What Blender version are you using?

@@basenthestickman4936 To my knowledge I was using Blender v2.80. But it has been quite a long time and I don't remember exactly.

@@jbblenderbreakdown4668 Alright. And also, can I send you a video link related to my provlem so you can properly figure out what is going on?

Have you tried rendering the image/animation? Looking through the render preview will not show the motion blur. Let me know if this works, and if not, I will see if I can find the issue. Thanks!

@@jbblenderbreakdown4668 Rendered it in Evee. Thanks for answer and tutorial. I made it different way. Just scale the cube on X axis and add emission shader and made it instance object.

@@YAMaLove11 Great idea! That works too! Could you comment that information so that I can pin it to the top? That way others can see it too. Thanks!

@@jbblenderbreakdown4668 Yes, I'll comment right away. Thank you.

@@YAMaLove11 Thank you!

Do you have motion blur enabled?

oh yes I did not do it. thank you. it is working now. Thank you so much

@@shivangipriya4153 Great! Glad it's working for ya! 👍

Thanks. I hope you do it again the video with render as will full video tutorial with my deep thanks

Ah I see. Does your bullet emitter shoot the bullet out or rotate it or both? Thanks.

@@jbblenderbreakdown4668 both

@@drxcopetez193 Oh okay. You'll probably need to make a driver to spin the bullet. The tracer emitter can emit particles, but I don't think it can spin them. The spinner will probably need to be a separate component.