Blender Tutorial - How to Create a Fire Trail

Рет қаралды 80,991

Күн бұрын

Hello everyone! In this tutorial we will be creating a fire trail Blender logo! We will be learning about curve constraints, dynamic paint and Mantaflow. If you enjoyed this tutorial make sure to comment down below or send me what you make!
Subscribe for more Blender Tutorials! kzfaq.info?sub_confi...
Come join the Discord! - / discord
If you want to learn more about the Fire Simulation check out my course on it! Mantaflow Fire & Smoke Simulation Guide in Blender!
www.udemy.com/course/blender3...
Skillshare Link - skl.sh/35DZ0Jj
Do you want to learn how to create a realistic modern house in Blender?
Check out my course on it!
www.udemy.com/course/blenderm...
Skillshare Link - skl.sh/3eVx5c3
Download Blender - www.blender.org
Come follow me on social media!
Udemy Page - www.udemy.com/user/stephen-pe...
Instagram - / blendermadeeasy
Twitter - / blendermadeeasy
Facebook - / 654488747984849
Website - www.blendermadeeasy.com
Gaming Channel - / therealsyberius
PC Specs
i7-9700k 3.60Ghz
Geforce RTX 2060
1Tb SSD 1Tb Hard Drive
Make sure you leave a like and subscribe! :)
Replay the Video!
• Blender Tutorial - How...
Blender Tutorial Fire Smoke Simulation Mantaflow Dynamic Paint Curve Animation Beginner BlenderMadeEasy B3D Cycles Eevee

Пікірлер: 147

@BlenderMadeEasy 4 жыл бұрын

If you have your own logo feel free to use that as well! If you guys make anything from this video make sure to send it to me @blendermadeeasy on Twitter and Instagram! This tutorial is a little longer than usual. Do you guys like the 20 minute videos or would you rather have them like 10 to 13 minutes?

@bnation34787 4 жыл бұрын

20 mins worked for me

@dennis-schneider 4 жыл бұрын

👌 it works with 20 minutes

@sayontonchakma5080 3 жыл бұрын

I nearly spent a week on donut for 12 tutorials, so 20 minutes looks more cool than 10-12 minutes, you are a good teacher!

@pro-nav 3 жыл бұрын

@@sayontonchakma5080 i made one in 4 days

@UncleSammy 3 жыл бұрын

10 min

@CarlsSimGuides 3 жыл бұрын

I can't express how helpful your tutorials have been to me over the last year learning blender. At this point, I don't quite need them as much as I did but you do help me generate ideas for my own projects. I suppose I graduated. But I am grateful for all your time investment into these tutorials and hope you have great success with your channel. I think I watched everything you ever made. Nowadays I have some idea of the process you will use just innately, and that's to your credit because you were one of my favorite channels for learning simulations. Thanks a lot man.

@BlenderMadeEasy 3 жыл бұрын

Thank you so much! I really appreciate the kind words. It means a lot!

@piotrjaszewski7034 2 жыл бұрын

if somebody dont see curve direction, u need to go vieport overlays and select 'normals'. vieport directions is on right top ( two circle icon )

@TheNei 4 жыл бұрын

Very Nice!! I love it!!♡ Thanks for this tutorial!!

@LaneCarter 3 жыл бұрын

Just what I needed. Thanks!

@SmellyNutz 4 жыл бұрын

Your tutorials really help me a lot. Keep making more. and.. first

@KatlinSchirmer 3 жыл бұрын

Cool! Very nice,Big Thanks!

@lordhyle 2 жыл бұрын

Dude that is amazing! 🤩

@ronioclarenzo6137 2 жыл бұрын

Awesome tutorial! Thanks a lot!

@danielscammerton3557 3 жыл бұрын

this one and the mist tutorial earned my sub

@sShepherd88 3 жыл бұрын

You're Amazing ) Big Thanks!

@inventorbrothers7053 3 жыл бұрын

Very cool and useful. Thanks!

@funwithblender485 4 жыл бұрын

Awesome tutorial.

@yeomany6807 3 жыл бұрын

Thank you! much love

@mukesh.m 3 жыл бұрын

awesome!!

@naturelive7932 4 жыл бұрын

THAT'S Great Tutorial

@miosoty524 2 жыл бұрын

Thank you soooo much omg This what exactly what I needed

@nicksparks3543 3 жыл бұрын

Amazing stuff! Just when I'm getting to grips with follow path now I'm throwing all your knowledge into the Blender pot. It quickly looks complicated but you explain very well so much appreciated. :)

@BlenderMadeEasy 3 жыл бұрын

Glad to help!

@blenderzone5446 3 жыл бұрын

Great like it!

@sebastiangonzalezsg 3 жыл бұрын

i am going to try this

@aalukxparatha 4 жыл бұрын

yo , yesterday i saw my first blender tutorial from your channel .......that mantaflow one . it came out to be exact same . so , now i have su bscribed your channel and i like your videos too.👌

@BlenderMadeEasy 4 жыл бұрын

Oh nice! That's awesome, thanks for the sub!

@h7opolo 4 жыл бұрын

5:25 fire can go in one direction if it's following a path of fuel. Your "friend" made the assumption that fuel is all around the fire. So, I think this graphic would look better if the fire goes in one direction. But, cool of you to cover both scenarios.

@FTGY12 4 жыл бұрын

Awesome tutorial. I have been playing around on how to make a whirlpool in a fluid simulation and ran into some problems. Can you do a Whirlpool in a fluid simulation for your next tutorial?

@focusonchrist6752 3 жыл бұрын

Thank you so much for this. I'm new, but am excited. How can i change the flame color, by chance? I have my render going now, awaiting for final outcome

@opathaya8611 3 жыл бұрын

wow man

@mikethom2119 3 жыл бұрын

very nice, instead of making curve and tracing out the blender logo import the logo into inkscape (also free) export a SVG to import into blender which imports as a curve

@Thor-ev2bf 3 жыл бұрын

did the default cube just- explode?

@piyushjain886 3 жыл бұрын

thanks yo

@lur91blaz 2 жыл бұрын

Is there a way to make the particles emit sparks instead of a fire trail?

@LessonsFromThe48 3 жыл бұрын

Would this also work for like a demon summoning thingy? Like from the floor a cool Dr. Strange looking thing.

@tarxandercage2621 2 жыл бұрын

Trying to figure out how to have a line of dust in a pile form following a curve like this, any idea how, Thank you for the tut very cool.

@aliabbasi7497 4 жыл бұрын

This was an amazing tutorial. Can you do a tutorial for like fire attacks or something?

@suberprat1281 2 жыл бұрын

Idk i cant get it to work on blender and the smoke Domain dont folow the UV cubes and idk when is take the modular the bake button says something like (Non Resumable Cache. Baking noise will not be possible) why? please help

@DaddyMouse 2 жыл бұрын

Great explanation however I have two issues: 1. the fire was not showing up after baking. I have tried several times, scrolled through comments to see maybe I am doing something wrong (apparently quite a few people have the same issue), and finally after many tries it suddenly started working. I still have no clue what changed. Point is, there is some sort of inconsistency 2. The fire looks way more blurred than that in the video. It looks like something from an early 2000s game. I had the same issue with his previous tutorial with the smoke. Again, I've followed everything he says, paying attention to the tiniest detail, and yet for some reason it looks bad. Did anyone else have any of these issues? Did you find a solution? Thanks!

@AB-yq6fw Жыл бұрын

same

@bobyalexart Жыл бұрын

Could you let me know if you figured out the problem? If you bake with 256 on the domain you'll get better quality. Could you make sure the objects you traced balls and plane are on the same level? It worked for me that way. Also, make sure to select the vertex group as he mentioned in the video.

@Fallin100 Жыл бұрын

try render in cycles

@TheNickH1982 3 жыл бұрын

Im looking at creating some animation using blender from a revit model. I need to show some kind of flow/object following a path to simulate flow , can you get a curve to snap to something imported?

@foxzergaming 4 жыл бұрын

👏👏👏

@dmays67 2 жыл бұрын

Off to do this myself. Yeah nah. Loved watching your cool vid tho. Much respect!

@manda3dprojects966 4 жыл бұрын

Thank you so much, I need this tutorial. If I can give 2 likes, I did it.

@eyepatch6726 3 жыл бұрын

How can we change the fire colour like on the starting and the end?

@ashutoshkumar6334 3 жыл бұрын

WHERE DID YOU GET THAT MODIFIER TAB, WHICH ADD ON TO ENABLE

@ANGEL-fg4hv 2 жыл бұрын

Late question but , do you recommend using bezieer curve to trace logos or using planes and using their vectors to create lines ,faces ect. Student moment : or are you using bezieer curve because the flame can only follow that path ....because of simplicity or facility made by the program itself.

@nicolanarracci 3 жыл бұрын

Fantastik tutorial... thank you, to do this in eevee what i have to do?

@lance3529 3 жыл бұрын

Instead of drawing out fire like that, would it be possible to draw out neon lights instead?

@thelaserviking2701 2 жыл бұрын

Any way to make the trail disappear from the opposite end after?

@shuaibbalogun4154 3 жыл бұрын

How can i get mantaflow on mac?

@occasionallyhuman 3 жыл бұрын

11:36 "We are gonna change a couple of settings here", you said.

@mr.vibe_yt 3 жыл бұрын

Hello, can someone tell me why is not work went i do it on blender 2.9

@WikusdeLange 3 жыл бұрын

Hi there. Love your tutorials and thank you very much. I am experiencing some trouble with the fire however. I have repeated every single step 3 times now, but for some reason my fire does not show in any of the different viewports after completing the bake. Would you perhaps know how I can fix it? Thank you in advance.

@daniilgofman7479 3 жыл бұрын

Yep, I have the same one.

@DaddyMouse 2 жыл бұрын

Same issue here

@supakimchi2698 2 жыл бұрын

Same ^^

@minimis3d842 Жыл бұрын

yeah same for me

@AB-yq6fw Жыл бұрын

same

@cjkalandek996 3 жыл бұрын

You should've done this tutorial along with a DeLorean time-jump effect, too. Thus, using the fire trails.

@Meezy_FX 4 жыл бұрын

Very nice but why are the renders so blurry? Is it because you used the Intel AI Denoiser?

@redgreen2768 4 жыл бұрын

😍😍😍💪👍👏

@Jakecolly Жыл бұрын

Sadly my fire sim isn't following the two spheres I made. Is there anyway you could help?

@Maurik05 3 жыл бұрын

this turtorial is so good, I'm not English, but I could understand everything!

@dhtube7762 2 жыл бұрын

You can go to conventio and convert your logos to an svj then you can export it to blender and you have a 3d logo

@drumboarder1 2 жыл бұрын

Rather than tracing the image with curves you could easily use inkscape to convert the image to a vector and just imported that

@anantt7940 3 жыл бұрын

hey i was going through your "Blender 3D Beginners Guide to the Particle System" in skill share am not able to find the halo effect in the blender 2.8 settings

@BlenderMadeEasy 3 жыл бұрын

That feature was only available in Blender Render which was a render engine in 2.79. They removed it in 2.8. I'm actually almost done recording the updated videos for that course. I will send an announcement once they are completed!

@indalecio21 2 жыл бұрын

What i wanna know is how you made the default cube explode.

@sebasguerrero2705 8 ай бұрын

if my logo has no curves? what shall I use instead.

@ericwalls603 3 жыл бұрын

Do you have any Blender videos for beginners would that be too tedious.

@anugrahshobhitmassey9259 Жыл бұрын

there are some blank spaces in the trail jow to fix that

@aalert 3 жыл бұрын

When you did the first quick bake at 9:06 it didn't work for me (0 frames baked) when the two ball's center was perfectly on the plane (same z coordinate). They just didn't paint onto the plane. I had to move the plane a tiny bit down along the z-axis. Not exactly sure what was going wrong, but I guess the faces of the balls never touch the vertices/faces of the plane when they are perfectly aligned (when the plane cuts straight through the middle of the ball). Nearly gave up on the tutorial until I started trying out all kinds of weird things. 😉

@dreadtrain3354 3 жыл бұрын

Thank you me man! I was stuck for 2 days ffs haha

@dreadtrain3354 3 жыл бұрын

"me=my"

@IAmAnItalianPizza 3 жыл бұрын

if that still isn't working, try making the object you want it to paint on a collision object in the physics tab

@suberprat1281 2 жыл бұрын

idk it onely works on 2.83.3 version

@DamianYamamoto 3 жыл бұрын

I tried following the tutorial twice but there's not fire effect getting baked :-( what could I be doing wrong?

@thestoicz 4 жыл бұрын

First viewer

@H_H46 3 жыл бұрын

everyone: thank you sooo much! me: how the HECK did that default cube explode?

@maesemario101 3 жыл бұрын

For some reason the fire is not appearing when I bake the domain

@sekaus9158 2 жыл бұрын

Same here...

@lazylenni1017 Жыл бұрын

Same

@thesdfable 7 ай бұрын

same....did anyone found a solution for this

@IAmAnItalianPizza 3 жыл бұрын

100th!!!

@mynameisnobody1386 3 жыл бұрын

I have 2 issues. 1- I dont get the little Arrows to show the direction. 2- after I burn the simulation and then play it back, I dont see the fire Full disclosure. I did make a few paths as my logo is 5 paths that I want to light up at the same time. I can upload the video of the render I have if needed. Any help would be great

@suberprat1281 2 жыл бұрын

same

@suberprat1281 2 жыл бұрын

idk did you find a salution

@rishabhrawat7856 3 жыл бұрын

Hey i am trying to make my school's logo. Can you tell me how to change the fire's colour? I tried changing the paint colour in the dynamic paint settings of the sphere but it still is that orange colour. I want it to become blue. Please help. Thnx

@BlenderMadeEasy 3 жыл бұрын

Watch my gradient fire tutorial. That will show you how to change the color for the fire.

@rishabhrawat7856 3 жыл бұрын

@@BlenderMadeEasy okay thnx!

@omarnaseer79 3 жыл бұрын

A very interactive tutorial, but I am facing one problem. I followed each and every step but after baking the data, the fire doesn't show up. I am not sure where I am going wrong even after following each and very step. Any solution or comment?

@novajax4637 3 жыл бұрын

I meet the same situation bro

@DailyVFX. 2 жыл бұрын

switch to cycles

@lazylenni1017 Жыл бұрын

@@DailyVFX. The fire still doesn't show up, for me.

@lazylenni1017 Жыл бұрын

Did you find a solution?

@thesdfable 7 ай бұрын

hey did anyone found a solution for this @@lazylenni1017

@cofucan 3 жыл бұрын

Please! Please! Please! I don't see any fire after the baking of the domain, the balls just move but no fire, and the domain does not expand as the balls move, it's just static. Please, I've checked everything and I followed your steps (though I'm using another logo, not blender logo). Please, what could be wrong?

@cofucan 3 жыл бұрын

Never mind, I found the problem. For some reason, the UV sphere does not work as a dynamic paintbrush. When I baked the dynamic paint canvas, the UV spheres are not interacting with the canvas. I had to use a cube with some subdivisions as my dynamic paintbrush and that fixed my problem. The fire now shows up when I bake the fire domain.

@tomelegeert2037 4 жыл бұрын

I tried this, but the fire is coming from everywhere on my path, not chronologically following my brush... How to fix this?

@BlenderMadeEasy 4 жыл бұрын

You might not have selected the vertex group for the inflow object. Try watching that part of the video again and seeing if you missed anything.

@tomelegeert2037 4 жыл бұрын

@@BlenderMadeEasy Thanks for your quick answer. But that wasn't the problem. I just discovered what was wrong: I hid the brush for viewport en render before baking. After unhiding it, it worked just perfectly. Thanks for the tut!

@nanoosx 2 жыл бұрын

agghhh I tried this multiple times but shaped the path as text instead of blender image, the fire refuse to show ;-;

@MinisterHelam 6 ай бұрын

why my fire not go up but flat

@MrLucrativethought 2 жыл бұрын

No flame came out for me... lol.. i'm trying to keep up.

@falxcon4709 3 жыл бұрын

When I go into edit mode after adding the curve, the arrows don't show up and I just don't know how to do it. Other than that, keep up the good work!

@omarnaseer79 3 жыл бұрын

Click the drop down of overlays (top right corner, next to show gizmo) and check on handles (bottom of the menu). Arrows will appear

@suberprat1281 2 жыл бұрын

idk it onely works on 2.83.3 version

@hrvojeradanovic708 2 жыл бұрын

idk why but my fire wont appear on my curve

@Maurik05 3 жыл бұрын

I finished and got 1 problem: I cant see the fire?

@cofucan 3 жыл бұрын

Me too

@funkypartyweasel 3 жыл бұрын

I found that if I hid the UV sphere, bezier curves and plane generating the fire before baking the smoke domain no fire would be baked. I found that these items only need hiding when you are prepared to render.

@Maurik05 3 жыл бұрын

@@funkypartyweasel so then it actual works?

@funkypartyweasel 3 жыл бұрын

@@Maurik05 for me, yes. There's a few things to try. Upgrading Blender to latest (2.9 to 2.9.1) solved a different particle issue, worth a try if you're not on latest. If that doesn't work try again from the beginning, making different versions of the save file with version numbers as you go through. That way if something goes wrong or doesn't work you can skip back to only a few steps ago rather than relying on Blender's still disappointingly flaky undo.

@funkypartyweasel 3 жыл бұрын

@@Maurik05 Yes.

@KD-wp6cm 4 жыл бұрын

Never in life after baking i saw any animation or stimulation 😭

@samanderiss 3 жыл бұрын

Try using the "final" baking mode instead of "modular" That did the trick for me, although it took a while.

@aalert 3 жыл бұрын

Move the plane a tiny bit down before the first bake at 9:06

@KD-wp6cm 3 жыл бұрын

I deleted this app... Now studying solid works

@N0Lif3 2 жыл бұрын

import an SVG of the blender logo to skip the first 5 minutes of the video

@kickpsycho4891 2 жыл бұрын

I didn't got any fire

@TheGamingBeehive 2 жыл бұрын

Good tutorial but my fire goes wild. I don't know what I did wrong.

@cristianhernandes7478 3 жыл бұрын

Dynamic painting does not create any vertex groups

@J-S.P 2 жыл бұрын

Would this be similar to the effect that's at the 0:11 mark of the following video? kzfaq.info/get/bejne/np5pha6r09Cpl6M.html

@lazylenni1017 Жыл бұрын

I don't see any fire after baking, despite having followed the instructions twice.

@alwaysberandom6470 Жыл бұрын

256 resolution but my fire still looks pixelated

@rogerrabbit3699 2 жыл бұрын

yeah, dont try out this tutorial if you are in the new blender. Like lots of people have pointed out, nothing happens when you try to bake it at the end.

@piyushjain886 3 жыл бұрын

do you talk like that irl also?