You got me. On the toilet. 😂

I,m 63...Painted every thing I could all my life...Still do,in it...Air bush as well...Vary nice job...Love yur non stop stile...I do the same thing...lol..Never have trouble...yur right..Its just paint..

I like this format. You are teaching me so much. Live long and prosper my friend!

Keep up the awesome work! I definitely get many tips and pointers from your videos. I’m new to the game and picked up a lot from you so I appreciate it all.

Love the shop videos. Thanks for sharing your knowledge and skill!

Brian, just want to say thanks man, I been watching your videos, I’ve always been interested in car paint, and how it’s done (especially blending, and those tri-coats), and you break it down so well, I’ve learned a lot from watching, and this is what I love about youtube - good people, sharing some knowledge and having good times along the way - and I’m so far away in Western Australia, watching some quality work going down on the other side of the world 👍👍

Thanks Brian,, for all your great work,, and sharing,, enjoy 😊💯

don't be afraid just do it,great video as always,i love the way you don't stress

Always learning from you Brian. finally got everything for my paint job. going to first do a practice bumper or two then I'm jumping in. Wish me luck.

Great job love watching you spray cars so I tried your technique the other day actually today on a 1954 Chevy hood keeping trigger on like your painting with a brush turned out really good give an extra coat of clear three instead of two because I don’t put too heavy of coats on when I do it just a nice wet coat really enjoyed watching some of your Serious about painting you’re absolutely correct don’t overthink it it’s just pain thank you Brian🤔

Love the uncut series. Thanks brother!

Love these uncut videos thank you

Really great instruction, much appreciated. Thank you.

This guy need more subs and likes. Well done buddy, nice clean work..

I can tell you were having a good day thanks for all the great content

Really like this format. 👍🏻

Love this masters energy

Looks awesome keep up the good work 🙏🏻

Awesome job! Great video.

Loving the videos !!

You guys are awesome nice work.

Great Video! Great Blending.

I've been painting cars for 15 years now. When I started I worked at a place that had really cheap product and it took sometimes 10 coats to cover the primer. Now I use Glasurit 90 line and I spray one wet coat and one effect coat and it's fully covered. I'll spray a third if trying to blend. I do agree these dark metallic greys are a tricky color to blend. They tend to get a cloudy effect happening but, that blending clear you sprayed helps a lot with that and that DV1 is like you said a really nice gun.

Awesome paintjob!

Great series Brian

Love this uncut series, man... Keep 'em comin'! [H] ❤️

Bro I’m loving this series!! Don’t stop the other one tho I love those to! Lol Thanks for the great videos bro that job came out sweeet!!!

Looks great 👍

You are awesome brotha thanks for the video i enjoyed it

Awesome job 👏

Love the new format. XL for the win.

Yes I’m sitting in the toilet it’s 7:40 pm . And yes! . I’m think that you’re a good!! teacher so please doing what you doing because I’m petty sure same one also copying you! and give us a great idea !! thanks my man a lot . I’m from Salvador very nice to meet you. Very,very good job. Also I’m resident from nyc!!

Wow great work

You are Awesome keep the videos coming

Nice work man!!!

Glad to see the UV come out. I love that stuff. Probably could have used it instead of the 2k.

15:00 don't over think it.... Its just paint... Just that alone helped me relax while painting... My jobs are 25% better now 💯🎨💪🏼

Very good job 👍🏻

tuning in from the toilet bud, keep the videos coming! 💯

Love this job bro and I'm smashing my like botton yahoooooooooo kaboooooooooooooom

Your feud between the "lady" should be a running gag 😂

Good job bro.

I found something... Another great video :)

What a beautiful color on that nsx

Yo I was on the toilet 😂😂😂... still am actually, you probably are too👀

San Antonio's smashing the like botton yahoooooooooo kaboooooooooooooom

Just recently started watching ur videos .. love how u blend the colors .. where did u learn ur profession ive always wanted to become a painter love the b4 and after

Keep the good work

Excellent Congratulations

Deluxe👍, 🙋🏻‍♂️from Panamá 🇵🇦.

I watched one last night and had to turn it off. I was thinking that it was a bit sketchy, then he pulled out a razor blade and started scraping the runs off. I'm not to your level, but I'm still learning. Thanx

❤Bringing my game up❤

Hi love the videos. Just had a question: What is the best way of getting rid of a tape line/ clear coat line? I bought a car and the side of it was re painted. There are clear coat lines in the door jams and there is some over spray where the fuel filler cap is. Is there a cheap/easy way or do I have to get the whole rear quarter done. How much does it roughly cost?

Paint Society is show ⭐

Nice new intro!!!!!

Hey Brian, just have some paint missing on my bonnet, about an inch in diameter. I'm okay with blending the panel to a wet edge using the clear base coat & reducer. However, after the panel's colour has been completely blended, do I need to clear the whole bonnet? Could I clear only around the area and then sand and polish the edge smooth? I am thinking of using my small 70L compressor and either a wide fan airbrush or a small spray gun. Am I in the right direction or is my approach going to suck? Loving the videos btw, really helping me gain more confidence to start painting my cars.

you're a really cool guy.

Hey Brian! Just asked an FLG-5 1.4 for my Birthday :D Cheers!

Nice job! On your clear coat/blending additive what is the mixing ratio? Thanks Brian 👍🏼

The sand paper said “See ya”🤣🤣🤣

Good job. That UV primer is interesting, never seen that. Im not a pro but ive always finished sanding in 180 before highbuild. On your 2nd and 3rd coats of base did you thin the color out with color blender/intercoat? Keep up the videos

I have a 2008 salsa red 4runne. I'm getting the hood and driver front fender painted a quality shop like yours. Should I be concerned about the blend between the fender and the driver door?

I’ve grown up of a family owned business and me being the youngest I always do things different. My brothers still don’t believe in using the microfibers but it lifts all the dirt. Use over and over I actually use two at once. One wet one dry and I keep separate from water born cleaner as well because water born and wax and grease remover don’t make well for a mix. Simple Walmart 30pack for like 10-15$ and last for months and months

getting my 95 Civic hood, trunk and quarters painted. Do you think I will have an issue getting the color to match when I have the door and fenders painted? The shop doing it says no but I like to get your opinion.

Do you apply clear base coat additive to the edges with every pass of colored base? Or just the first pass?

What do I use if I have the Sikkens paint system as my blending additive as a wet bed can you help me out here Love your teaching videos.

God Bless you😎

Great video had me laughing

Microfiber to clean in the booth!? Gotta try that!

Why did you use the UV primer instead of using the same grey primer ? Thanks!

Has any one used sx840 uniform finish blender.... i found when blending with this the edges of the sx840 blender react almost wanting to crinkle....which is very weird cus the panel is super clean wax and degrease and wiped down with glass cleaner... i used it on few different jobs and when base over the blender same issue the edge react.. using nason ..and transtar base coats.

Question do factory uses 2k clear or 1k? Which you do you use? What brand of paint does Acura uses?

Hello Brian, so that wet bed is pretty much reduced clearcoat? And it becomes dry right?

Really love your videos! Really helps me with my own jobs. You use Sikkens right? What other paint systems have you used before? How does the Sikkens compare? I have been offered a Sikkens system hence the question. Cheers from Namibia!

So ru triggering it when ur spraying the base or ru holding it down to blend? I’m having problems with blending and I’m leaving like halos around the spot job when it comes to grey metallic color

How do you deal with chemicals? I sprays a small repair and my tongue went numb. I don't know if it was the hitek fast reducer or what because I never experienced anything like that before

Hi Brian, when blending, once you apply sealer do you give it time before you apply blend

Brian. Can you inform us where to locate / purchase the trim removal tool(s), please. Grazie!

💪🏼🔥

Nope! I’m watching from the body shop on break 😎

Off-topic, but do you have any videos on removing trim or fenders on cars prior to painting?

I bought a duplicolo can and pen to fix a few scratches on my Elantra. I matached the code of my car paint with duplicolor index/manual but the new color is kind of bright and my car's color is dark. does any one know how can I make the new color a bit darker? My car' color code is N5S and the can that I bought is DSH54 and the touch up pen is hcth6-c got them from the manual but they dont match.

Have you ever tried tacking with a microfiber? It's a game changer! The panel will feel smooth with a regular tack rag but if you go over it with a microfiber you can feel all the junk the tack rag missed. It has made my jobs 10 times cleaner!

Hi! Why you put clear base when yo do a fender and you dont with 2 doors? Thanks

Can I substitute clear coat for clear base On the edge of my blends? thank you @paintsociety

bro what's the name of the paint which have small bright particles shining plzzz reply

Nice vedio boss

Can you help me? I’m trying to blend house of color some dark spots that I had. Do you have any ideas on what I could do?

Brian, Not so much in this video, but using a guide coat is required on many projects like restorations on truck bed sides or others. I have seen many use cheap flat black to Evercoat powder pad, plus SEM. Why wouldn’t a simple spray can of RED primer work as a guide coat over gray, a contrasting color? SEM can be pricey considering it’s going to be on the floor, while Evercoat fills pin holes and perhaps some fine sand scratches. Either way, they do a job to help us get the repair flat but still ends up on the floor. The stuff on the floor is part of the repair, but just curious on the contrasting primer thoughts. Thanks. I Miss the co-worker ribbing, tapping on the oil pan with a small hammer from the far un-seen side, when your buddy starts up a engine he just finished, or counting the lunchtime pickles stuck to the ceiling where a group sits to eat. 23 was our record. It all fun until someone gets mustard in their eye. :) Retired ASE Master Tech

So funny god bless you.

I wonder if there any video you did a paint job on sport bike fairing ... need instruction how to paint motorcycles fairing.

I have a similar repair issue with my car. My question is when you sanded 800 grit on the entire panel that needed repair how deep did you sand? Did you sand all way to the primer or down to the base coat?

I bought the color code for my car its molten orange from ford, now the problem is that the red underneath the metallic looks like its to dark, what does that mean? Wrong color red or not enough metallic?

Thanks 🙏 for the information ℹ️ Brian job well done 👍 that look 👀 pretty good man keep it up stay safe u the man 👌👌👌👌👌👏👏👏👏👏🙏🙏🙏🙏💪💪💪💪💪💪💪💪💯💯💯👍👍👍👍👍👍👍👍👊👊👊👊👊👊👊🔥🔥✨✨✨✨✊✊✊🧨🧨🧨😉😉💣💣

Did you get the idea go use a micro fiber towel from motivated painters? You had mentioned his channel in a video one time and I have been suscriber since. Thanks for the video, like the new format as well.

Very nice work . What's up with that roll of tape ?

Hi brian, could you go over solvent pop/fish eye in one video that be great appreciate it 🙏

I got TCP GLOBALS "BRILLIANT SILVER FIREMIST" and it can't be blended.. Any ideas

nice👍

Bryan can you just buff clear with out sanding the clear?