How To Blend Paint in Small Spaces

Рет қаралды 11,413

Жыл бұрын

Small spaces while painting, and how to blend.
AMAZON STOREFRONT : www.amazon.com/shop/kandyman/...
#ad #comissionsearned (paid link)
SANDING PADS : amzn.to/3OfKNci
TACK CLOTHS: amzn.to/458dq1K
DV1 GUN: amzn.to/3OmrxKd
3M PERFORMANCE GUN: amzn.to/3s2YQKH
KANDYLAND: kandylandd.com/

Пікірлер: 110

@andrewyuschyshyn9154 Жыл бұрын

Honest, to the point and intelligent. Nice to see a pro loving his work.

@kandyman5315 Жыл бұрын

Thank you

@carlosa.martinez6100 Жыл бұрын

I am a retired painter with over 40 years in the trade. One is never to old to learn new tricks . Keep up the good work. I enjoy your channel.

@kandyman5315 Жыл бұрын

Thanks 👍

@fireball7671 Жыл бұрын

The door turned out great, and that BMW😍

@by_chris Жыл бұрын

Great video, been watching your stuff a lot for the past couple months, always leave learning something ,I’m currently 21 and work at production shop as a prepper, could you make a video on what you would have done differently when you first started out or really just tell us how you got to where you are now. Hoping to be a top level painter like you kandyman

@kandyman5315 Жыл бұрын

👍

@zemoney954 Жыл бұрын

❤

@user-un5my5bw4j 4 ай бұрын

I have been painting for 10yrs. Every now and then i go back through a couple of your videos as well as Brian from paint societies videos before i start certain jobs

@williampribas5093 Жыл бұрын

Loving the video what we call in the industry Small Repair Area Technique or SMART for short.

@GarageNoise Жыл бұрын

Thanks for showing the BMW that is a sweet whip for sure!

@kandyman5315 Жыл бұрын

Yes it is thanks for watching 👊

@davidparker9676 Жыл бұрын

I'd like to see this same type of repair but on a more challenging color like champagne, gold or medium silver. It is nice to see different techniques like your blend-in technique.

@kandyman5315 Жыл бұрын

👍

@ChicagoRob2 Жыл бұрын

Beautiful results. Kandy Man knocks it out of the park again.

@colingater2743 Жыл бұрын

Another great lesson Kandy Man Thanks 👍

@kandyman5315 Жыл бұрын

👌

@wanderingweederspapa7878 Жыл бұрын

Color right and room for the blend.. great video

@kandyman5315 Жыл бұрын

👊👊

@zemoney954 Жыл бұрын

❤YESSSS SIR! THANKS FOR SHARING!!! BEAUTIFUL CAR FR AND NICE WHEELS...KEEP PUMPIN MY MAN 1LOVE

@aussie8114 3 ай бұрын

Brilliant 👍🏼

@coolgirly6454 11 ай бұрын

Love to see your videos, hope to implement your numerous tips, thank you!

@charliepepper3601 Жыл бұрын

Great tips. Thanks!

@dougderby9454 Жыл бұрын

Valuable techniques. Excellent.

@bodyshopsolutions695 Жыл бұрын

Great work.. exactly how I do those.. straight to base is the money shot

@dp9948 Жыл бұрын

The wet bed eliminates posable sand pilling on a blend, nice work, very informative.

@leviscott8519 7 ай бұрын

Very valuable video. Thank you!

@MrDexcars Жыл бұрын

What a beautiful job candy man you truly are the master

@69ktracho Жыл бұрын

Great jobs Kandy man and thanks to share your knowledge and experience with newbie and old people in this industry because always learning something new especially when a lot of us didn't have someone to direct or explain very well how is the easy and better ways to do some jobs I been painting for 12 years and I'm just leaning new trick couples years ago in the paint from watching videos like this, a lot of us appreciated you share anything can be helpful to us and thank to other guy do videos like you and share with us , I thinks the new generation have more and better information to start fine in this path

@kandyman5315 Жыл бұрын

Your welcome

@user-yb2tp4qf1r 11 ай бұрын

Perfect!

@GarageForty7 Жыл бұрын

my favorite paint channel. love all the tips

@kandyman5315 Жыл бұрын

Appreciate it 👊

@alexlove2588 Жыл бұрын

Love the back blending technique. Will definitely incorporate that into my blending. Keep going man. Appreciated greatly. Pray for your continued progression in a wild world...

@huckleberryfinn338 Жыл бұрын

I love this channel. I like the shop, the paint booth, and the inside tips by a master of his craft.

@kandyman5315 Жыл бұрын

Glad you enjoy it!

@paulthompson8642 Жыл бұрын

Thank u again nice to see the pride u have in your work

@kandyman5315 Жыл бұрын

My pleasure!

@wildbill1 5 ай бұрын

great video!

@marlonelizalde7780 Жыл бұрын

Kandy man always killing it🤙🏻 thanks for taking the extra time n effort to show us the insight of a true quality shop, humble but confident to keep em body guys within the line 🤣

@kandyman5315 Жыл бұрын

Thanks for the support

@JohnWD40TC02 Жыл бұрын

Very interesting tutorial Kandy Man as I haven't seen many videos like this before for a small blend so it's a very useful video, great to see the DV1 for clear as well👌👍John UK

@sebastianj4264 10 ай бұрын

Good job..thanks for sharing

@ANDY-we7mr 11 ай бұрын

Brilliant thanks for sharing that very well explained 😀

@kandyman5315 11 ай бұрын

😊

@ANDY-we7mr 11 ай бұрын

@@kandyman5315 had some issues painting my car i know Brian from paint society are you on Instagram

@daveunbranded Жыл бұрын

So impressive. You probably save a ton of product that way.

@mtnberner2971 Жыл бұрын

Kandyman! That’s to easy, dark color center of the door, do a video with a silver or gold and 6” blend room. I’m just frustrated, because that’s the type of repairs we have to do at our shop, basically no such thing as a blend on certain jobs. Love your videos, you rock! P.s. ever thought about doing a podcast where painters can share tips and tricks? I have a bunch of unorthodox tricks.

@kandyman5315 Жыл бұрын

Sounds great!

@conorlee9241 Жыл бұрын

Love the vids amazing quality of work always,your truly in sync with the paint system, drives me mad how you are making it look easy, when it's such a stressful job ..is the dv1 1.2 your go to gun for clear.. even if your doing full resprays..👍

@kandyman5315 Жыл бұрын

Dv1 is my go to gun 1.3 for full resprays

@conorlee9241 Жыл бұрын

Sorry for being annoying, so would you prefer the dv1 over the supernova for resprays or atomization for laying the clear flat..

@kandyman5315 Жыл бұрын

Can't go wrong with either one those are the best of the best

@conorlee9241 Жыл бұрын

Thanks again ..

@gevybiazon8980 Жыл бұрын

by the way. my denim pad order still cant pursue. it says they dont know how to compute my bill sending here in philippines. thanks again.

@randywiddis Жыл бұрын

Is this a premix wet bed, or are you mixing it? I'm still solvent based. What would your mix be for that?

@kandyman5315 Жыл бұрын

10 percent water reduction

@helikestoskate 4 ай бұрын

What is the mix of the wet bed? you mentioned it is a clear and base mix. Thank you for the video.

@kandyman5315 4 ай бұрын

I mix it 10%

@gevybiazon8980 Жыл бұрын

nice work sir. if you wont mind my asking sir. is it possible normal clear coat to do the bonding? here in philippines we are not having clear base. so ive been thinking this long time ago. because i will be painting my toyota innova 2019 model. i purchase also ws and ls series 2 from iwata. practicing how to perfect the gun settings. thanks.

@thomaskappauf7345 Жыл бұрын

Base coat blending clear

@glbn6832 Жыл бұрын

Greetings from BULGARIA :)! Could you share what is the clear coat you have use to get this really shiny finish. Tx

@kandyman5315 Жыл бұрын

Ppg 2021 clear

@meguinness1116 9 ай бұрын

Did u use a interface pad on the sander? ? Thank you

@kandyman5315 9 ай бұрын

Both

@wildbill1 5 ай бұрын

How long do you wait after applying the wet bed to apply your basecoat?

@kandyman5315 5 ай бұрын

The sooner the better

@milestone_media Жыл бұрын

Have you used the dv1s?

@kandyman5315 Жыл бұрын

Yes great gun

@carpitecture 5 күн бұрын

What material is being sprayed for the wet bed? Is it thinned out clear coat?

@kandyman5315 5 күн бұрын

Base clear

@dell618 Жыл бұрын

Do you have to put a, wet bed on before each coat? Or just the first? How does it work?

@kandyman5315 Жыл бұрын

Just once

@kandyman5315 Жыл бұрын

That can be done to if necessary

@dell618 Жыл бұрын

@@kandyman5315 great thanks

@Jopakilo Жыл бұрын

I would like to know if the colour is pearl white in this case, how it going to be handled

@kandyman5315 Жыл бұрын

Same way

@anthonypirone4661 Жыл бұрын

If I can ask how long have you bin in the trade.. and how much time it took where you were confident in painting at this caliber

@kandyman5315 Жыл бұрын

28 years in this trade, this trade is always changing so it keeps me on my toes .👊

@anthonypirone4661 Жыл бұрын

You do great work and alot of it.. its joyful seeing your videos and can say myself being in the trade from high-school to now 10 years how much goes into it 👍

@charleszornak8042 Жыл бұрын

What clear do you use

@kandyman5315 Жыл бұрын

Ppg 2021 clear

@darthgeros5863 4 ай бұрын

if i sprayed clear that fast man the job would be dry and peely and just uneven

@markperez6195 2 ай бұрын

Is a wet bed another name for a blending agent? I have heard that some use slow reducer as a blender/wet bed. Any input will be appreciated.

@kandyman5315 2 ай бұрын

It is a clear paint

@markperez6195 2 ай бұрын

@@kandyman5315Happy Memorial Day weekend!! If the repair area of the door panel featured on this video would have been about an inch away from the door edge side that is closest to the front fender, would the blending process have been the same? Sadly, had my first burn-through ( clear / base coat) while polishing to prep for a ceramic coating on a mint 2000 BMW E46 coupe in Alpine White and man I am frustrated. I assume that I would mimic what you did with the damaged and untouched substrate area and ensuring to keep the repair at a minimum. But in my case, being the repair area is so close to the edge of the panel next to the front fender, how should the blend be processed? Darn, I wish I could send you an image so you could briefly review and provide your thoughts / feedback. Regards, Mark

@kandyman5315 2 ай бұрын

@markperez6195 get color right and stay in door would be my choice

@markperez6195 2 ай бұрын

@@kandyman5315Since there is no need to repair any defects on the burn-through can I just spray a bit of sealer instead of primer onto the burn-through area and proceed with a wet bed on the entire panel, base coat and clear.

@kandyman5315 2 ай бұрын

@markperez6195 yes

@andrewtraylor314 8 ай бұрын

There is a body man at my job that will panel prime a door for damage that small. I told him he is gonna have to start bringing his doors over prepped with 320

@kandyman5315 8 ай бұрын

👍

@danmaher7947 Жыл бұрын

I was curious, for just a small dent, wouldn’t it have been a lot cheaper and faster to use a PDR guy?

@kandyman5315 Жыл бұрын

Paint was damaged

@danmaher7947 Жыл бұрын

Gotcha. It turned out awesome! You do really nice work. What clear do you use and what gun?

@fugglestick Жыл бұрын

Why no PDR instead?

@kandyman5315 Жыл бұрын

Paint was scratched

@Sumkindawonderful Жыл бұрын

What do you run the 3m gun at for psi?

@kandyman5315 Жыл бұрын

15 psi

@Sumkindawonderful Жыл бұрын

That with the 3m regulator?

@Sumkindawonderful Жыл бұрын

3m regulator feels choked...like 30 psi on that gun would be 20 on any other

@kandyman5315 Жыл бұрын

Try a different regulator at 15

@Kustompaint2026 Жыл бұрын

Why not use a scuffing agent on the rest of the blend area instead of DAing with 800 grit??

@conorlee9241 Жыл бұрын

Because 800 knocks down the orange peal ,and better adhesion , and helps with the clear laying down nicely.

@kandyman5315 Жыл бұрын

I like things dry but is another way as well.

@ericcunninghamrealtor Жыл бұрын

Bimmers is the term for their cars. Beemer is the term for bikes.

@kandyman5315 Жыл бұрын

👍

@miceinoz1181 Жыл бұрын

Yes, that BMW is going to scrap after the first owner for sure. Imagine the maintenance burden on all the electronic crap in it. "Oh sir you need a new door control panel, that will be $5000 plus labor and programming" After a few years it will be "Sorry sir, parts are no longer available for this car" This is industrial waste at the worst. I own two older BMW X5's and some parts are getting hard to find for them (E53 and E70) so imagine something like this with only a very small production run. Love the painting tips though.

@kandyman5315 Жыл бұрын

Thanks for your take.