Blue Sky Bio Surgical Guide Design Single tooth MegaGen AnyRidge

Рет қаралды 2,092

Danny Domingue

2 жыл бұрын

Пікірлер: 10

@rootdoc1609 2 жыл бұрын

Great info Danny. Thx. 90% of my cases

@c_lent 10 ай бұрын

Are you doing this with megagen’s regular anyridge kit or with the R2 surgical guide kit

@dannydominguedds 10 ай бұрын

yes, always

@HassanAbbas-ju4ny 2 жыл бұрын

Hey Danny, Will this guided stent account for all the sequential drills after the pilot drill?

@dannydominguedds 2 жыл бұрын

You have to print more guides in various diameters to account for each drill

@peacemaker3323 Жыл бұрын

Hi. If i am using the megagen Drill kit. What setting should I use for the guide tube?

@dannydominguedds Жыл бұрын

Print guide tube at 5.15 settings in BSBPlan when printing at 100microns. Use the MegaGen guide reamer after curing the resin. This will get you to their ideal measure of 5.08mm. The offset for their drills is 12.5mm. Hope this helps.

@mattmaxdraudt9662 Жыл бұрын

@@dannydominguedds guide tube height is preset to 4mm. Just leave it at that using megagen kit? Thanks man love your content!

@shaneturgeon3492 Жыл бұрын

Is Megagen catalog still available in BSB? I can't seem to find it on my updated version. Thanks

@dannydominguedds Жыл бұрын

It is in mine. Not sure why not showing in yours. BSB released a new A.I. Version this week. Might want to download that one.