Creating a Bone Reduction Guide and Surgical Guide with Blue Sky Plan

Рет қаралды 25,884

N. Cory Glenn

6 жыл бұрын

Пікірлер: 25

@noureenweam7138 2 жыл бұрын

Amazing job and amazing technique really astonishing.

@paulohenriquefreitas3434 Жыл бұрын

Your vídeos are excellent, Cory. I don't have the words to thank you enough!

@itamarpanohacham 6 жыл бұрын

Great tutorial, again ! How do you Import the bone model STL instead of the surface scan STL to create the guide ? do you need to align it to the CBCT dicom ?

@user-wd5jg7xm7u 2 ай бұрын

Hello Is there a video of the bone cutting method in exoplan. I hope you answer me. Thank you ❤️

@user-pw2tq1uh7r 3 жыл бұрын

Hello, I use same method, but in case with tooth extraction I have hatd problem: registration of bite. For this I print 3 guides: 1) for pin's fixation (pleased on the tooth) 2) for reduction (after tooth extraction) 3) for implant placement 4) cast individual tray with printed tooth of patient (his tooth) All guides i fixed on same pins. In you case hard fixation of guide is missed. Do you can explane how I can fabricate multipieced guide which not have required replacement many times? One base guide and multi top separeted pieces. Sorry for my English.

@rami_astro 6 жыл бұрын

You are a legend!! you helped A LOT!!!! Thank you very much! I contacted BSB to ask them if they can add a feature of joining two models into one so we don't lose an export just for merging two models. Hopefully they will add this feature soon :D

@marciusv 6 жыл бұрын

i cant fabricate a guide without a model ou another ct scan, how i can appli draw curve only with the Original CT scan? i not apply to click

@stephanieperryman417 5 жыл бұрын

Are bone reduction guides necessary when your not getting implants..?. I have bone that needs shaved down that is very obvious. Oral surgeon in Shreveport are the ones doing extractions and tori. I'm getting dentures and they don't fit.

@iqqyhassan2339 6 жыл бұрын

how about a full body bone reduction surgery?

@scanmaximaging391 4 жыл бұрын

WILL IT COST ME HOW MUCH TO EXPORT EACH STEP AS STL OF GUIDE N MANDIBLE THEN COMBINED AND THEN GUIDE?

@n.coryglenn3814 4 жыл бұрын

Only one export per CASE so once you export once, you can do it as many more times as you want with no more charges.

@franciscodarquea5544 5 жыл бұрын

Cory, how did you get the mandible to be a STL file from the CBCT?

@JoonKimDMD 5 жыл бұрын

Did you figure this out yet? I am curious too.

@rubengil6377 5 жыл бұрын

@@JoonKimDMD Just export your CBCT data as an STL file, and import it again. But if I'm not mistaken the software should let you draw the guide on top of the CBCT 3D data just like he did, without having to export/import it.

@n.coryglenn3814 4 жыл бұрын

@@rubengil6377 You must do "bone segmentation" which turns the jaw bone into a clean, watertight STL.

@rubengil6377 4 жыл бұрын

@@n.coryglenn3814 oh this is great, was going to ask this in one of your videos, thank you.

@jled1082 6 жыл бұрын

My question is how many STL exports did you have to pay for this one guide?

@n.coryglenn3814 6 жыл бұрын

It's only 1 per case..........once you've exported once, all the others are free from that same case

@happytooth5826 5 жыл бұрын

Cory where are you living? I can hear Owl's hoot sounds!! ^^

@n.coryglenn3814 4 жыл бұрын

Winchester TN........probably was recording out at my farm

@pedroteixeiraeng.2390 6 жыл бұрын

I'm sorry, but I do not really agree with this technique. What if the doctor when wearing the bone with the reference guide wears off more or less of the bone? It is most likely that the second printed guide with the implant rings does not sit well and is move. I think the ideal would be to do the reverse. There will be a first guide only for the pilot drill and only then there will be a second guide to wear the bone.

@jmabarcag 6 жыл бұрын

Then you would need two set of guides with reduction rings and another one for the reduction...not feasible, though not bad idea