No video
1999 Ranger PCM PATS CMP
Рет қаралды 2,803
11 ай бұрынHere we have typical mobile job!
Be sure to check out courses.handso... for online automotive videos and lessons more in depth than I have on youtube.
Also check out courses.handso... for more resources and information. If you liked this content and have not already subscribed please do so now!
Equipment that I use:
TopDon Battery Maintainer amzn.to/40mubUw
Cardaq Plus 3 amzn.to/3Z9F3V1
Astro Meter amzn.to/402cIkJ
Break out box OTC amzn.to/41f0x3Z
Break out box Go Daig amzn.to/3nWCqsK
Quality Test Leads www.aeswave.co...
amzn.to/3LH5Vsc Pico 2205
Camera equipment that I use in the field
amzn.to/40jzpR2 - Sony ZV-1 Camera
amzn.to/40hchCA - Tascam Audio Recorder
Studio Camera amzn.to/3Jz7A0p
Studio switcher amzn.to/3MDU52v
@ivansperanza 11 ай бұрын
If i remember right, there is a tsb for replacing cam sensors on these trucks. They would cause misfires at over 3k rpms.
@scottschantz2553 11 ай бұрын
Thanks for taking us along Brian. Your information is always valued. I would expect an old truck like that would have multiple problems. Good to watch your process. Thanks again!
@ThePracticalMechanic 11 ай бұрын
I love checking back pressure on fords with dpfe. Just connect a vacuum/pressure gauge to the dpfe port and give it a snap throttle. Easiest vehicle to test. Here in Colorado I am at 5300’ ASL and our typical BARO is 143hz, 83kpa, 12.4psi, 24.5in/hg. I’m glad you mentioned elevation because even many of the paid training events don’t mention the difference of a known good at sea level vs high altitude. We also have customers that live at 9,000’ but only live 30 minutes away so you have to check their address if the baro is off. Thanks again for the video. Was that the atem switcher?
@BrianMann216 11 ай бұрын
Yes that is right!! I for got so easy to test at dpfe!
@mrblonde2013 11 ай бұрын
New set-up? Thank you for your time and effort. It is definitely appreciated.
@BrianMann216 11 ай бұрын
Yes trying to stream line editing. Basically, on site !
@ThePracticalMechanic 11 ай бұрын
Thanks for the video. I wonder if the reman company disables the FEPS circuit internal of the pcm to prevent programming. I always thought pcm codes were cleared whenever KAM is reset as well.
@nickayivor8432 11 ай бұрын
Enjoy your weekend with all your family around you, Hands On Auto Training Brian Mann SHREWD Hands On Auto Training Brian Mann From Nick Ayivor from London England UK 🇬🇧 ⏰️ 20:49pm
DMW - Dirty Muddy Weekends
Рет қаралды 182 М.
L1 Automotive Training
Рет қаралды 124 М.
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 258 М.
Andromeda Research Labs
Рет қаралды 56 М.
Top 5 Auto Repairs
Рет қаралды 26 М.