2014 Cruze stick shift. This is a example of how a technician may have to fix other mechanics faults to get to the bottom of the situation or back to the original problem.. Check out courses.handso...
Пікірлер: 104
@PaulysAuto2 жыл бұрын
Brian, you've always been a very devoted and honest man. I am thankful for all you do for us ❤️ 🙏
@BrianMann2162 жыл бұрын
Thank you! I appreciate the support!
@oliverrojas318511 ай бұрын
Hello, in this video is really good content that demonstrates a great deal of determination to narrow down the cause of a stalling, no crank vehicle. It is very reassuring that you used a multi-meter to thoroughly decipher electrical flow thru the wiring hanress. It is impressive that rather than buy a new wiring harness, there was stil enough internal mental reserve and physcial capcity to remove one from a another vehicle. Thanks for showing the benefit of exercising patience, knowledge, and persistence to bring the Cruze back gto life.
@quintonauto58622 жыл бұрын
Thx for being so detailed on how you went through this problem, certainly learned some knowledge in how to go through the CAN system, just had this same problem but only found it by luck, looked in that connector because i noticed carpet still very wet months after snow is gone here and was most likely place to find a corroded terminal or 2
@BrianMann216 Жыл бұрын
Well you did a good job paying attention to the details. Sometimes that is all that it takes to be quick to the point on a potential time consuming diagnosis. Thanks for watching.
@dtandfam81002 жыл бұрын
Good work Brian. That car was a mess! Just like the ones I get to fix. Lol 😆 dealers/auction cars and tow yards have the most interesting problems. Very cool how you worked threw it! Thanks for sharing 👍
@BrianMann2162 жыл бұрын
Thanks 👍
@kdautomotive11652 жыл бұрын
Watch everyone from start to finish. Definitely learned some new techniques. I under utilize the ohmmeter when troubleshooting networks. I tend to look at the waveform and knock modules off 1 by one. Ohmmeter isolated the fault here
@BrianMann2162 жыл бұрын
I am not a huge fan of ohmeter, but using in combination with scope is great
@MrJgonzalez22 жыл бұрын
Great video! One thing that has always workerd for me when doing mobile is taking an extra good battery along with a charger to the jobsite.
@kylehayes64986 ай бұрын
Dude you are a genius! I have a Cruze that I could use your assistance on lol.. I had a ecu pin burnout problem that I temporarily fixed and now I have put a new ecm on it and fixed the plug issues and I can’t get it running now 🤦🏻♂️
@BrianMann2166 ай бұрын
did you get it programmed?
@kylehayes64986 ай бұрын
Yeah I ordered it from flagship1 and it wants to start but it’s not getting enough spark or something? Pulled the plugs and it looks like only 2 are firing? You don’t happen to have an ecu pin out diagram do you? I need to make sure that I don’t have the wires crossed on my plug and the internet is? Not giving me much information
@ssrbob2 жыл бұрын
I think the most important thing is you selected the correct scanner to go with the cars color scheme.
@BrianMann2162 жыл бұрын
LOL yeah, I think the blue painted plastic makes is go faster!
@mrblonde20132 жыл бұрын
Persistence and skill wins in the end😄 excellent job Brian.
@BrianMann2162 жыл бұрын
You got that right! Do not give up !!
@tommymarkham42022 жыл бұрын
Great video Brian. The network issues can be a pain, especially when someone has already been messing with it. Videos like this make me happy that I work indoors! Haha.
@BrianMann2162 жыл бұрын
Hey Tommy! Thanks for watching, working out side is tough sometimes, I was putting this car off for a few weeks, every time I could get to it the weather was not cooperating.
@tommymarkham42022 жыл бұрын
@@BrianMann216 I should be seeing you again in November correct? And when I get a little time I am going to check out your paid site!
@BrianMann2162 жыл бұрын
@@tommymarkham4202 super saturday,
@arthurfricchione81192 жыл бұрын
Happy Easter to you and your family. It’s a shame how some of these cars are mangled before you get to work your magic. Thanks for sharing and enjoy Easter 👍
@BrianMann2162 жыл бұрын
Thanks Arthur, Happy Easter! I would not know what to do if I had the 1st crack at a car LOL
@glennallen71292 жыл бұрын
Hey Brian thanks for sharing your knowledge ! I appreciate videos like this. There’s a lot to pick up from this! Happy easter
@BrianMann2162 жыл бұрын
Glad you enjoyed it, thanks for the words of encouragement.
@korycurtis37306 ай бұрын
Good job, sucks working on shit boxes like that, but sometimes it's easier to rip and tear it apart for diag purposes
@nazilabdul43495 ай бұрын
I like it bro I have a cruze ecm bcm tcm module not communicating what’s the problem can bus DLC PIN checked show 60 om but car couldn’t communicate 😢
@voodoob1tch2 жыл бұрын
Really enjoyed the video mate. Just found your channel from all the way over in New Zealand. Keep up the good videos man, appreciated
@BrianMann2162 жыл бұрын
Thanks for watching!!
@chrisi19092 жыл бұрын
Wow, sometimes i wish the Car could tell what other people did to it.....Mushed Wires, Bathtube in the Rear and of course greenies :-) Have a nice Easter with your Family
@CubasAutomotive2 жыл бұрын
FANTASTIC!! I truly love these intricate videos! Felt like I was there. 👏🏻👍🏻
@BrianMann2162 жыл бұрын
Thanks for watching. I love these type of problems. Just need a good battery and other people not to mess around! I was really thinking I had it fixed with the fuse block bolts being loose..
@CubasAutomotive2 жыл бұрын
@@BrianMann216 those bolts were indeed a great start. It really didn't take you much longer to pinpoint the biggest issue, because I'm sure it was a combination all those little things too... or they would've been soon enough.
@rrmech112 жыл бұрын
Hi Cuba
@CubasAutomotive2 жыл бұрын
@@rrmech11 hey Richard 👋 Happy Easter to both you fine gentlemen 😊🐣✝️
@northcountryautodiagnostic32062 жыл бұрын
I’m glad I’m not the only one, who goes round and round. With the green crustys in play
@BrianMann2162 жыл бұрын
Yeah the green stuff sure does make some odd things happen. Not so odd me scratching my head for a minute.
@gurumonkey2 жыл бұрын
I learned a ton from watching this!
@vauxtips66872 жыл бұрын
Hi Brian from the U.K. I’ve been watching all your videos for a very long time and enjoy the content and learning. With the difference in time zones how would getting more involved work with your classes etc Happy Easter 🐣
@BrianMann2162 жыл бұрын
Happy Easter, thanks for watching. Currently the online premium meetings are 9 pm newyork time. That would be really late or very early 2am?? I have been recording the premium meetings and posting, but this is not a replacement for the interaction.
@raymondstucker16092 жыл бұрын
Ty for sharing ur knowledge and time. Happy Easter too u and ur family
@BrianMann2162 жыл бұрын
Thanks for watching! Happy Easter!
@exkaliburdigital2 жыл бұрын
This is why I love my fleet job.
@stevenjames70732 жыл бұрын
Thank u for sharing ..Excellent work
@mftstrifelegit27862 жыл бұрын
Nice video it helped me fix one of my customers car thanks
@BrianMann216 Жыл бұрын
Glad it helped
@brogren8022 жыл бұрын
Looks like the stereo install caused tons of problems likely from the mods to the wiring and the vibrations too. That line level converter next to the corroded terminals was definitely related to each other. Some people shouldn't be messing around with wiring unless they have a basic understanding of how things work. What a mess
@BrianMann2162 жыл бұрын
YES some people should not work on vehicles!
@fernandomoran59792 жыл бұрын
Thanks for helping us
@BrianMann2162 жыл бұрын
It's my pleasure
@shaffere332 жыл бұрын
Great content as always! Thanks for sharing
@BrianMann2162 жыл бұрын
Thanks for watching!
@advancedleveldiagnostics2 жыл бұрын
Hi Brian, great video as usual, I'm also a mobile tech, I've seen you use Milwaukee pack out for your charger and other things. Any chance you can make a video on your setup so we can all get some ideas? Thanks
@BrianMann2162 жыл бұрын
Here are a few things... I have the proloxix charger now kzfaq.info/get/bejne/f6dgd7hpzLSWpGg.html
@advancedleveldiagnostics2 жыл бұрын
@@BrianMann216 Thanks!
@RadRodsandDadBods8 ай бұрын
So if I have a 2014 Chevy Cruze with same exact engine, only a Automatic, and it's doing the same exact thing, with the same exact Open then Close window message, I should be looking at the control modules? Is that what this video is saying to do?
@BrianMann2168 ай бұрын
No that is not what this video was about.
@DependableAutoTruck Жыл бұрын
great video thanks for sharing
@boycotatlanta Жыл бұрын
Great job Congratulations
@tracycolorado2 жыл бұрын
Pull your hair out , B. Your the man. What would you charge the customer for this kluster **** , do you charge by the hour , or the amount of lost blood . Hope you are compensated adequately
@BrianMann2162 жыл бұрын
By the hour
@jasonstaub3045 Жыл бұрын
Great one brother. Ty!
@7minnow2 жыл бұрын
Great Job Mr B. Man do you have alot of patience, Love your videos
@BrianMann2162 жыл бұрын
Thank you for watching!
@philh92382 жыл бұрын
That inititial resistance check of pins 6 and 14 isn’t accurate because you have a gateway module?
@BrianMann2162 жыл бұрын
Same readings ( varying) else where, it should be 60, next cruise I get wi will show you.
@BrianMann2162 жыл бұрын
kzfaq.info/get/bejne/o9p9hpuD29LSZqc.html
@philh9238 Жыл бұрын
What scope model is that little hantek? Do you have to use the leads you have to turn a screw to compensate them or can you use regular scope leads on it
@BrianMann216 Жыл бұрын
272d it uses bnc leads
@eduardorodiguez8156 Жыл бұрын
thanks it help
@philh92382 жыл бұрын
Does the topdon have the topology?
@benjaminlevi77922 жыл бұрын
Good job thanks
@BrianMann2162 жыл бұрын
No problem
@hooptierescue25402 жыл бұрын
Good job. What a mess!
@stephanecampeau9814 Жыл бұрын
You use the pico scope to do your job. Is the Uscope garbage cause U give it away?
@BrianMann216 Жыл бұрын
Lol , no I love the uscope! I just gonna another one again (I sold my last one that I was using and they were on back order for quite some time.) Uscope is a fantastic tools for thr price and the convient compact size.
@BrianMann216 Жыл бұрын
I also have many videos showing me using it to diagnose communication faults
@darrenflounders28032 жыл бұрын
excellent
@BrianMann2162 жыл бұрын
Thanks!
@johnnyouk35132 жыл бұрын
How you like using that hand tech scope?
@BrianMann2162 жыл бұрын
It's ok, clunky compared to pico. But can tell me whether or not we have an issue
@philh92382 жыл бұрын
Never mind I see it does
@icenitribe29672 жыл бұрын
How many miles are on that car?
@BrianMann2162 жыл бұрын
I think 155k
@icenitribe29672 жыл бұрын
@@BrianMann216 I have the same one but automatic. Someone really messed that 1 up.
@soptea2 жыл бұрын
That noisy generator is so funny ...why not an extra normal battery ?
@BrianMann2162 жыл бұрын
Key on for over a hour will go dead. I bring my own power to not have any issue's.
@BrianMann2162 жыл бұрын
It actually sounds louder than it is, I was also trying out a shotgun microphone that may have made it louder as well
@bfpn40162 жыл бұрын
💪
@rrmech112 жыл бұрын
👍👍
@donaldadkins22032 жыл бұрын
Wrong color of antifreeze it looked green
@BrianMann2162 жыл бұрын
yeah they must be messing with it trying to match the blue details LOL
@johnmitchell8925 Жыл бұрын
Your charging the battery with a generator 🤣
@BrianMann216 Жыл бұрын
Sometimes no power available. Don't worry I charge extra for generator usage.
@JohnDoe-sp8zg7 ай бұрын
this is not a 2014 cruze its a 2013
@JohnDoe-sp8zg7 ай бұрын
ilookedupmthe diagram to follow then i remeber you shoed the year the car was made december 2013 checked that diagram and thats it
@BrianMann2167 ай бұрын
It is a 2014 model year, the 10th digit is an E, production date has nothing to do with model year. Back in the late 90's th new body style 1999 grand am had production dates as early as 12/97.
@BrianMann2167 ай бұрын
It is a 2014
@yurikohakoАй бұрын
Great video but you're too judgemental.
@swav100 Жыл бұрын
What's the difference with Phoenix smart and Phoenix plus
@BrianMann216 Жыл бұрын
I am not 100% sure
@jesushernandez5752 Жыл бұрын
Man, no wonder this car is all messed up I little bit of cleaning inside would not hurt