BMI Karts Drift Trike Axle Kit

Рет қаралды 40,747

6 жыл бұрын

We needed an axle kit for the drift trike, and knew we wanted to run a 41/40 style chain/sprocket setup to fit the motor setup (more on that soon). We picked up a kit from BMI just a few hours away in Illinois. #REBUILDEVERYTHING
41/40 Wheel/ Axle kit:
www.bmikarts.com/Drift-Trike-Axle-Kit-with-Tires-Rims-40-Chain_p_3306.html
More on the Drift Trike Build:
kzfaq.info/sun/PLL23nhLHHDt-NM6oFr2qC7HnBKdML_P3e
--------------------------------------------------
"Home Sweet Megalopolis"
TeknoAxe
www.teknoaxe.com

Пікірлер: 32

@marcusmoreno32 Ай бұрын

Best video on KZfaq thanks so much I can now build my trike

@jeffd1960 5 жыл бұрын

thank you rev j.

@bstarnes514 3 жыл бұрын

Good Video brother! I buy alot of things from BMI

@trevermoss997 5 жыл бұрын

Hay do you need lock collars on the sprocket hub ???? Not sure same kit .thanks

@larrysullivan6536 4 жыл бұрын

This is brilliant I wondered could I use this principle to make an axle for my trials motor cycle and put disc brakes on it and machine a pair of trials bike rear wheels to fit those wheel hubs would it work I don’t want to pay for an expensive rear axle there so expensive please could yo advise my .i just want to make my montesa trials bike into a true it would be so cool please could you advise me cheers Larrysullivan in London

@dsmooth2449 4 жыл бұрын

I see you have the tire screwed to the hub but what goin keep the hub from sliding off that axle. Is there any set screws on the hub

@mirc9427 4 жыл бұрын

D Smooth yea there is set screws

@cHr1SGify 6 жыл бұрын

Aight...I have this exact same setup. My locker collar on the none hub side of the sprocket adapter isn't fitting for some reason. It hits the nuts from the hub side. Did you have any issues like that?

@REVJHD 6 жыл бұрын

I don't understand how it can hit the nuts; the width of the hub places the collar around 1" outside where any of the hardware would install, and is a smaller diameter than the bolt circle. Any chance the hardware was installed from the wrong side?

@cHr1SGify 6 жыл бұрын

REV J Don't think you could install the hardware the other way as the nuts will not fit on the hub locker for the sprocket. It's extremely weird. If I was able to attach pictures I'd be able to show and explain better. Yours looks like it fits perfectly with what you said about an inch. But my locker is flush with the bolt holes haha.

@REVJHD 6 жыл бұрын

My email contact is in my channel bio if you wanna try and send a picture, up to you.

@joeykickass8284 4 жыл бұрын

I have the same problem now... did you find the problem?? Or a solution?. I'm thinking about using some nylon lock nuts instead... might give me some room...

@jptv2025 6 жыл бұрын

How to put a disc brake??

@REVJHD 6 жыл бұрын

It would slide on the axle with all the other components. This setup is not currently using a rear disc brake.

@siryusef9862 5 жыл бұрын

How did you bolt on the wheels?

@REVJHD 5 жыл бұрын

They bolt on the hubs.

@gunnslinger7774 4 жыл бұрын

Is the sproket is really close to the ground???

@REVJHD 4 жыл бұрын

@gordonzentz2953 2 жыл бұрын

Do you have a discount code if we purchase and mention you?

@REVJHD 2 жыл бұрын

Nope, I'm not affiliated with the company, just wanted to share my project.

@islahsiddiqui 4 жыл бұрын

so if you don't put a key on one wheel than it spins freely making it a one wheel drive?

@DavidRodriguez-fn4yn 4 жыл бұрын

Islah Siddiqui if there’s no key in the wheel then it won’t spin with the axle. So yes, if there’s a key in only one wheel that’s the only wheel that will spin.

@islahsiddiqui 4 жыл бұрын

@@DavidRodriguez-fn4yn thank you for the response. I conclude that it will be a free spinning wheel then.

@DavidRodriguez-fn4yn 4 жыл бұрын

Islah Siddiqui yes but that wheel could take damage since the actual wheels have no bearings

@islahsiddiqui 4 жыл бұрын

@@DavidRodriguez-fn4yn thank you sir, BMI Kart team has suggested an idler hub for such setup.