Just found your video right now searching for DIY videos making speaker stands. So far your design is the best one that I could find and there are a lot out there. My stands need to raise my speakers 36"s, and since I have grand kids running around who have already knocked over the cheap speaker stands that I got from Amazon, the stands that I am going to build will need to have some weight at the bottom so they don't easily topple over. Going to use your design but I will be making a box on top of your bottom foundation. The box will be hollow and I am going to put some lead weight in it and bolt it down and then finish it with the rest of your design. And I will probably stain the wood instead of painting it. But I will paint the pipe black and will look good against the wood grain. Thanks again for a great DIY video!!

Do you have to use a spool gun for aluminum? I have just a couple little spots to weld on my john boat and was wondering if I just got a spool of aluminum and put it in my Hobart?

Best video on KZfaq thanks so much I can now build my trike

So this setup wouldn't work for some stock 15x10 wheels?

What numbering do you recommend to start welding?

A very beautiful grill.

You talk to much, just show us what it is and give your mouth a rest

Majority of the tiny wheels are garbage and the bearing fall out they need to be able to roll over1/2'' rock etc

Nice spool guns you got there. I've never used one, but I am looking forward to try. Since, I already have the welder (HOBART 210), I want to go for it. Thank you for the comparison.👍👍

The 210 and 211 are different in that the Hobart is a transformer machine, and the Miller is inverter. Different power technologies. I would imagine that's why they made a different plug for each. I have the 210, and for the cost, I'm glad I do

This is the wrong way to install a catch can. So many you tubers have no idea how they work. Your creating a vacuum leak with that vented catch can. Probably should explain this so people don't make this mistake. You need a "closed" catch can.

thanks for the info, helped me out

Love the grill I have a 01 gmc sierra I want the same grill u have can you tell me where you got it and what sight thank you

LED lights are a downgrade to the old incandescent lights

both are owned by Illinois Tool Company

I think it looks like shit, the ols one is way better looking than that crap

Dude that looks great i'm trying it. THANKS

I’m looking for a new grille for my 2004 Yukon Denali Xl, can’t seem to find any of these aftermarket’s.

should have transferred the GMC emblem. Otherwise nice! I wasn't looking for a custom video but more a rebuild and i think you covered the names of the parts i'm looking for. Thanks!

How did it do?

Does that kit clear 15s pretty good I used the little shop mfg kit and my caliper hitting the wheel

My family ancestory links back to Eochaid 111 of Argyll in 0697. Also Griogair Mac Alpin in 0820 and Gregor MacGregor in 1220. All the way down to John Henry MacGregor in 1576 and everything in between. John Henry is the reason we ended up in Ireland because he made a deal with King James 1. Then John Gregg moved us to the USA and his son, William Obediah "Revoluntionary Bill" Gregg fought in the war. We've been in Virgina and North Carolina ever since.

Nice Video ,what part no was your pitman arm, mines suppose to be a,K 6131, but classic cross the no over and sent me another one and it don't seem to want to go on right ,thats,why I asked about yours

Hey !looks good to me,iam still priming mine hope,in a,few weeks I be ready ,good keep them comming !

Hello, what kind of cleaner spray did you use to clean the gasket area?

تفو

I actually just found some of these headlights in the back of the shop. I think I scored big especially now that I have headlights to go on to my 74 c10 lol

What year model was the astro van you got the rotors from?

might not be seeing it but do you have part number for the bracket kit?

Those lines…and the flaring on the ends!! Ooohhh!!!

Nice 👍

Where did you buy it ?

Wouldn't it be best to put a big fuse just after the battery terminal Soo it doesn't act as a huge flame thrower if it somehow touches bare metal?

@11:12 the one in the bottom with a kink in the feeding line is the Hobart😂

Reviving a dead project, Do you know where this car is? I was the one that took it off the rotisserie when i was 18 years old, got it to a roller and traded it to Ryan. Curious where it ended up? Nice job on the paint work btw, cant believe the body work was even that bad. Everything but the hood had been blocked and sprayed once before. I also made that spoiler. Glad it stayed.

So basically don't use Amazon Kindle and spend 100 bucks

Gracias Rev. Muy excelente contenido. Saludos desde México.

Wow, a heat shield that protects your self-esteem from negative imprints. How nice!

I can't justify spending over 500 bux on my headlights but they are cool

Great work, I’m doing a 86 C10. Lot of patience work. 😬😬😬

Building a C30 1 ton. Bright light in the floor I'm having trouble getting the lights to work the harness is getting power to the witch. Not sure if the high beam switch in the floor is required as it's missing the button I have cab lights and dash lights but no headlights or parking lights. Need some help

HarborFreight now sells a clone of that Traxion creeper. 400lbs limit

Even the battery is dead it can still work?

Lol with 1 highs at 170+ retail now, 150 was a steal..

What kinda of rims are those

Man I really dig your C-10 and like the blue on black combo. I was just curious if it is paint, plastic-dip, or powder coat? Thanks!

nice What did you use to cut headlight buckets to fit new lights.

Yes all that but the real issues are the caps. They should be swapped out and frankly upgraded even if yours sound OK today. And also be careful of the black goo of death. I swap my caps out every 500 hours or so and when I do it always blows my mind how much better they sound. But my rokits are 10+ years old now and I've learnt my way around them. Lots of repairs. Anyone who opens my krks will see various upgrades. Be sure to use decent solder and not the free crap thrown in with your eBay special iron. All that said, it's usually an annual event that one just starts popping, ticking or generally sounding trashed (I'm here because today one has just started popping until its warm (classic cap ailment) . They have a habit of destroying themselves . And anyone using the 3.5 jack is just asking for issues. Quality XLR all the way.

What if mine is crackling with no inputs at all, just power? Just one of mine crackles with just power. I have them plugged into a Y spiltter than directly extensioned to an APC battery backup system. Too noisy?

Do you have a link on the black wheels?