Great, useful, clear video CDB - nice one, as always.
@user-kn5kt2lt2k Жыл бұрын
You are a fucking good mechanic, you are explaining everything so good, i want to thank you, do you have a social media account like insta,... where we can ask a few questions ? Regards.
@tv-in6xo4 ай бұрын
유용한 정보 감사합니다. 혹시 몇킬로미터 주행했습니까?
@pzdousands_ Жыл бұрын
hey man i took the locking plate out from the pressure plate before installing it to the flywheel and that plate is stuck now any recommendations on what to do next.
@1FaSS012 жыл бұрын
Don't stand in front of the locking plate, when you remove it 🤣🤣🤣🤣
@magnum075462 жыл бұрын
You didn't need to drop the propshaft if you left the donut on the gearbox end of the gearbox. You simply just drop the gearbox slightly (with a suitable jack) and separate propshaft from the gearbox nor do you need to remove the exhaust or starter motor. You added a lot of unnecessary work. On a positive note, you earnt an extra hour of labour. Nice video though (See this youtube Video kzfaq.info/get/bejne/n5mKetmS2MnTho0.html)
@Chris_CDB2 жыл бұрын
Constructive criticism… always has its place! On another note… I don’t charge my jobs hourly. I charge by the job….. so no I didn’t earn any extra money, a job is a job… some you win some you loose!
@ssss-df5qz Жыл бұрын
Sorry but that's nonsense, you absolutely should be removing the rear donut of the prop, the hangar and the gearbox end to make the job easy. I personally don't remove the heatshield, I just unbolt it either side and fold it down to get to the prop hangar bolts.
@Leight94 ай бұрын
Too much grease lol
@Chris_CDB4 ай бұрын
You know what… you’re right.. The car wouldn’t move out of the workshop because the clutch was slipping that much from all of the “excess grease” you may just of solved a 2 and a half year problem for me!, will FINALLY be able to get it off my ramp and back to the customer.. who incidentally has had one of my courtesy cars for the last 3 years…..
@bahissafg3 ай бұрын
Too much English lol
@Chris_CDB3 ай бұрын
Sorry should I have swapped to German halfway through?
@1FaSS012 жыл бұрын
Don't call yourself a professional...please don't tell other people to use hexagon sockets on torx Fasteners.... E-torx sockets are as cheap as normal hex . .