BMW E24 restoration

Рет қаралды 223,762

Жыл бұрын

In this video we inspect and start to restore a 1986 BMW M635csi E24.
If you enjoyed the video, smash that Like and subscribe button & comment your thoughts down below. It really helps us out!
Check us out on Instagram - / con. .
Check us out on Facebook - / yorkshirecar. .
Check us out on TikTok - / yorkshirecarr. .
Check out the first part in this series where we show you around the car and our initial thoughts:
• Abandoned Datsun ...
Check out our 1980 Suzuki LJ80 restoration playlist!:
• Introducing our B...
Check out our other how to and rusteration videos:
Mk2 MX5 Rusteration:
• Can we Fix the Ru...
MX5 How-To videos:
• How to Remove a M...
Check out the little classic mini restoration!:
• Classic Mini
Check out our MX5 V6 Conversion!:
• MX5 V6 Build
We also have much more content on our playlists as well as big plans for the future!
---MUSIC---
🔻
"Neutrin05 - Home" is under a Creative Commons (CC-BY 3.0) license
Music promoted by BreakingCopyright: bit.ly/bkc-home
🔺
-------------------------
🔻
"Alex Productions - Alone" is under a Creative Commons (CC BY 3.0) license.
/ @alexproductionsnocopy...
Music promoted by BreakingCopyright: bit.ly/bc-alone-song
🔺
-------------------------
🔻
"Nikos Spiliotis - Helen 2" is under a Free To Use on KZfaq license
• Nikos Spiliotis - Helen 2
Music promoted by BreakingCopyright: bit.ly/b-helen-2
🔺
--------------------------
🔻
"AERØHEAD - Leaving" is under a Creative Commons (CC BY-SA 3.0) license.
/ aer%c3%98head
Music promoted by BreakingCopyright: bit.ly/bkc-leaving
🔺
----------------------------
🔻
"Nomyn - Awake" is under a Creative Commons (CC BY 3.0) license
/ @nomynmusic
Music promoted by BreakingCopyright: bit.ly/bc-awake-song
🔺

Пікірлер: 229

@rezaq1 Жыл бұрын

Fast becoming one of my favourite KZfaq channels

@yorkshirecarrestoration Жыл бұрын

Thank you :)

@davidmckinney6577 Жыл бұрын

Definitely my new favorite channels I love how you can fix and fabricate body panels and weld you sure know your stuff

@yorkshirecarrestoration Жыл бұрын

Thank you David :)

@jimmypratt6450 Жыл бұрын

I've been in the trade for 47 yrs and your work is outstanding . People don't realise what it takes just too patch a panel up thats why i avoid your kind off work. I started in the trade as a painter and thats how i'll end it lol . Great work 👍👍👍

@yorkshirecarrestoration Жыл бұрын

hi Jimmy , yes your right it is a lot of work specially as we do this all day then in our own time do the ones for youtube :)

@a.c.4732 Жыл бұрын

@@yorkshirecarrestoration - yes but never, ever forget how much pleasure YOU are giving to both customers and viewers alike . Why don't you open a shop in Southend ? Big Clue : sea air / rusty cars !

@alcasey3551 Жыл бұрын

This is my favorite car of all time. My mom had the exact same one in red but I think it had a sunroof. My dad had a BMW dealership and my mom picked me up from school and and we went to see her new car bring off loaded from the truck. She loved that car. It's great to see a restoration of such a great car; it makes me so happy to see it; thank you 😃😃👍👍👏👏

@yorkshirecarrestoration Жыл бұрын

glad your enjoying the videos :)

@colinritchie1757 Жыл бұрын

New Car arrives in the Workshop, the team looks it over , spots massive rust damage ,the cry goes up ,"why can't we ever have nice cars to work on", and the reply comes "If they were nice anyone could fix them" - another cracking project to follow

@yorkshirecarrestoration Жыл бұрын

Thank you :) we do love fabricating and that's only posible with rust haha

@claireparkinson2044 Жыл бұрын

I could watch this all night.great work🙏👍

@yorkshirecarrestoration Жыл бұрын

Thank you Claire :)

@rezaq1 Жыл бұрын

And you’ve got the best and most peaceful music I’ve ever heard!

@yorkshirecarrestoration Жыл бұрын

Thank you :)

@billng6024 Жыл бұрын

I m having one in Singapore . 1980 E24 635 CSi . Took me 3.5 years to restore . Beautiful memories

@craig_ramjet990 Жыл бұрын

Hang in there little e24. Don't be afraid. You're in good hands. Thank you for saving this baby. I can't remember if they had a V8 model.

@yorkshirecarrestoration Жыл бұрын

Thank you Craig :)

@markfoster7564 Жыл бұрын

Interesting how you weld then cut, then weld….and repeat as needed to get the panel flat/straight. Great work Steve! I can’t get enough of the fabrication process! 😉

@yorkshirecarrestoration Жыл бұрын

Thank you mark :) it’s also fun doing it :)

@carolbond4705 Жыл бұрын

It is amazing to watch you shape a piece of flat metal into a piece of art.

@yorkshirecarrestoration Жыл бұрын

thank you Carol :)

@rocnnrollbus Жыл бұрын

I have this exact car in my driveway...in line to get wrenched on with the rest of my projects. Too many car projects my wife says..told her I bought it for her so I could keep it🤣

@yorkshirecarrestoration Жыл бұрын

best policy :)

@tedhann8345 Жыл бұрын

Pure magic. I love watching this stuff. Thanks!!

@yorkshirecarrestoration Жыл бұрын

It's our pleasure :)

@richardbutterfield7399 Жыл бұрын

big respect - you are a skilled person along with your colleagues.

@yorkshirecarrestoration Жыл бұрын

Thank you Richard :)

@mheredia72 Жыл бұрын

amazing craftsmanship, please continue the keep the "real cars" alive!

@rosscato8745 Жыл бұрын

Nice work as always. Got to love an E24, even if the previous repairs look like they were done by a plasterer….

@yorkshirecarrestoration Жыл бұрын

Haha thank you :)

@tanagobg Жыл бұрын

I'm fascinated by the effort you put to make it right! great work

@yorkshirecarrestoration Жыл бұрын

thank you :)

@andrewkoenig5104 Жыл бұрын

Steve you should have been a artist, you see the picture before it’s painted! I’ve been messing about welding cars since I was about 18 and now 70 now and your work is absolutely brilliant.

@yorkshirecarrestoration Жыл бұрын

Thank you :) you have few years experience then :)

@shaunblakemore7150 Жыл бұрын

Your fabrication skills are awesome 👍

@yorkshirecarrestoration Жыл бұрын

Thank you shaun :)

@jamesward5721 Жыл бұрын

Kicked into a customers '80's RS escort today.. same colour as your beemer.. pulled everything off - interior, all bolt ons, dash, all glass blah blah - had a bare shell + engine/running gear by days end. I think it gives your beemer a run for its money on the "Is any bit not rusted out?" front. :-) That Datsun springs to mind...

@yorkshirecarrestoration Жыл бұрын

Yer it's unbelievable how.m ch prep.work is needed before you even get to the rust sometimes :)

@JF-4444 Жыл бұрын

Just amazing craftsmanship here, makes it look easy when it is anything but. Getting those things to fit so accurately is very difficult. Not warping it all into a pretzel while welding it is also difficult or blowing lots of holes all over the place and that thin metal.

@yorkshirecarrestoration Жыл бұрын

Thank you yes it takes a little practice :)

@NickDV007 Жыл бұрын

Great car and great workmanship 👍 Can’t wait to see this one finished 👍

@yorkshirecarrestoration Жыл бұрын

Thank you Nick. Me nither :)

@carswithcrackers Жыл бұрын

Whoa! I wouldn't have thought to use that combination of dies in the bead roller that way! Thanks for sharing!

@yorkshirecarrestoration Жыл бұрын

Yer I didn't have a tipping die so used what I had :)

@1983dmd Жыл бұрын

Total respect Sir....

@yorkshirecarrestoration Жыл бұрын

Thank you very much :)

@leofabbro456 Жыл бұрын

From BMW i like only the shark nose ones. Good choice and good work.

@yorkshirecarrestoration Жыл бұрын

thank you for your continued support Leo :)

@abolsgrind5742 Жыл бұрын

Yes! A restoration on my favourite car, so cool!

@yorkshirecarrestoration Жыл бұрын

Glad your enjoying it :)

@barryturner1152 Жыл бұрын

Another great video guys, could sit and watch these all day long.

@yorkshirecarrestoration Жыл бұрын

thank you Barry we really do appreciate that :)

@russthebiker 7 ай бұрын

Bloody epic, what a car , cant wait to see it finished

@aalabbasi Жыл бұрын

I have an E24 M635CSI just like this one except that it's lived in Texas all its life and doesn't have a spot of rust on it. I did just buy a very rusty Mercedes Benz W111 coupe that looks like it's had a skim coat of filler wiped all over it in a previous restoration that's starting to fail. These videos aren't just educational, but they're therapeutic. Thanks for putting them out there.

@stephenroberts5993 Жыл бұрын

First time watched one of your channels Love the E24 CSI Fabricating skills superb 😮 👍👍

@yorkshirecarrestoration Жыл бұрын

Thank you Stephen we really do appreciate the support :)

@falk0017 Жыл бұрын

This is a project how I like it. Just like the Vauxhall I restored some years ago. You're doing a great job. Greetings from Germany 🇩🇪

@yorkshirecarrestoration Жыл бұрын

thank you Very much for your support and hope you enjoy the coming videos :)

@Miller80 Жыл бұрын

I recently bought a 635csi greenshark and this about to be the video manuals for my body work.

@yorkshirecarrestoration Жыл бұрын

That is the whole point of our videos so it makes us happy this is going to help :)

@rhodesm6683 Жыл бұрын

Just found this channel. I watch Mat Armstrong, and my feed suggested checking you guys out. I immediately subscribed. superb skills for sure. What I can't figure out is that this video got over 182K views, but only 2.5K likes? Come on people....show this channel some love alright? Cheers from Guam USA👍

@hansjorgkarcher9504 Жыл бұрын

Again a nice car. Could watch your videos the whole day long. Great skills and work!!

@yorkshirecarrestoration Жыл бұрын

thank you very much :)

@tonynightingale4400 Жыл бұрын

Exceptional craftsmanship Steve , the soothing music allowed the viewer to concentrate on your work more....😀😀😀

@yorkshirecarrestoration Жыл бұрын

Thank you Tony we do try to make our videos interesting :)

@nealnaz Жыл бұрын

I get mesmerized at how you work. Thank you for sharing with all of us. Can you please share what happens to the rusted portion of the wheel well? It looked as though it was not also restored, but has rust damage. Does it get replaced sheet metal and attach to the outer skin, or attached to the Sill that you replaced, off camera filming,? The work you all do for this channel, well, it's great stuff to watch and learn from!

@yorkshirecarrestoration Жыл бұрын

The wheel well should be in the next video and the floor section in coming videos :)

@patrickjenkibs2092 Жыл бұрын

That's what you call a body shop. Good work

@yorkshirecarrestoration Жыл бұрын

thank you Patrick :)

@BITTYBOY121 Жыл бұрын

I love how you took your time and got everything to fit like so. Great fabrication and bodywork skills. Well done ! 👍👍👍

@yorkshirecarrestoration Жыл бұрын

Thank you Joseph :)

@BITTYBOY121 Жыл бұрын

@@yorkshirecarrestoration You're very welcome mate :-)

@gokturk232 Жыл бұрын

Perfect work. True legend car

@yorkshirecarrestoration Жыл бұрын

Thank you :)

@romulus_ 8 ай бұрын

this is a form of artistry. thanks for saving this shark.

@drumtochtyglen Жыл бұрын

Just wonderful Steve, you have eyes all over your head to see all the different curves intersecting on the panel and your skill to get that wheel arch curvature on your fabrication to match the car is beyond belief! Just poetry in motion!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@yorkshirecarrestoration Жыл бұрын

Thank you Eddie :) we do appreciate your support :) 👍

@cesarefiderio1634 3 ай бұрын

Artista e mago delle lamiere, bravissimo artista e artigiano nel far rivivere una bellissima macchina.

@petersalter4269 3 ай бұрын

Mesmerising, it's like an art work

@Samueltiro 5 ай бұрын

I put my hat down for you Sir...If you were a doctor a lot people would be alive! Your skill level is insane!

@rickdaniel8478 Жыл бұрын

Amazing skills ! Fascinating to watch master craftsmanship Great videos 😊

@yorkshirecarrestoration Жыл бұрын

thank you Rick :)

@chrismasondarts Жыл бұрын

Levels in life and this is on another one, incredible to watch.

@yorkshirecarrestoration Жыл бұрын

thank you for the encouragement Chris :)

@tonygoshive785 Жыл бұрын

You are amazing at what you do, so satisfying watching you getting your head round making each panel from scratch with no stress😀 can I ask what welder is best for a beginner with no power source?

@yorkshirecarrestoration Жыл бұрын

the snapon ones are very good :)

@leeopenshaw9302 Жыл бұрын

Great work there Steve as always 👍👍

@yorkshirecarrestoration Жыл бұрын

Thank you Lee , you will have to pop along and see the new shop :)

@georgeclements2742 Жыл бұрын

Super work, as always.

@yorkshirecarrestoration Жыл бұрын

Thank you :)

@stevenmackay9192 Жыл бұрын

Awesome as always Steve

@yorkshirecarrestoration Жыл бұрын

thank you again Steven :)

@markroberts35 Жыл бұрын

You boys have skills

@yorkshirecarrestoration Жыл бұрын

Thank yo u Mark :)

@raybennett3692 Жыл бұрын

It's wonderful to know that great craftsmen (if were still allowed to use the word) are still doing this quality of work I look forward to seeing more of the same is there a start to finish set of videos on a vehicle?

@yorkshirecarrestoration Жыл бұрын

Hi Ray, thank you ,yes i think we are ok to say craftsman haha , if you look on out channel you will see various series :)

@pl5624 Жыл бұрын

Damn.....that BMW is the ultimate rusting machine! Lol

@yorkshirecarrestoration Жыл бұрын

Compaired to what we are restoring it's not to bad :)

@pl5624 Жыл бұрын

@@yorkshirecarrestoration can't wait to see more...

@pgm5693 Жыл бұрын

Awesome!

@DLT-po6to Жыл бұрын

It always hurts me to see such extensive rust damage on a beautiful car like this. Especially if someone just smeared bondo on it. You should deal with rust before it gets out of hand. If you just cover it up it continues to eat up the metal underneath. Good that there are Craftsmen like you who can fix it the proper way. I always admired people who can work with metal like that. It is art. I have a 635csi from 83. Luckily only with a few very tiny spots of surface rust in the engine bay and on the wheel arches. All the metal still is untouched original because i deal with the rust as soon as i notice it.

@yorkshirecarrestoration Жыл бұрын

It's nice to have such a rare rust free car :)

@mapkrk1316 Жыл бұрын

Awesome job mate !

@yorkshirecarrestoration Жыл бұрын

Thank you :)

@NitrousVolvo Жыл бұрын

love the vids. great music.

@yorkshirecarrestoration Жыл бұрын

thank you Jack , glad you like it :)

@melbice9906 Жыл бұрын

Damn impressive work. 🇦🇺

@yorkshirecarrestoration Жыл бұрын

thank you Mel, bet its warmer where you are :D

@aydinmamaev9459 Жыл бұрын

Хорошая работа . Оживление больного . Врачи профессионалы . Добрых Вам дней )))😊

@gearhead9828 Жыл бұрын

If I had just 10% of your skills, my classic would be in much better condition. 👍👍

@yorkshirecarrestoration Жыл бұрын

Im sure you can with a little practice :)

@Joustra-Diaclonecom Жыл бұрын

this is talent!

@yorkshirecarrestoration Жыл бұрын

Thank you :) 👍

@mitkine Жыл бұрын

Great jobb this is one of my dream cars plzzzzz make more videos of it

@yorkshirecarrestoration Жыл бұрын

thank you and dont worry we will be making videos of all the rust repairs on this :)

@mitkine Жыл бұрын

@@yorkshirecarrestoration love them channel you guy's are amazing

@yorkshirecarrestoration Жыл бұрын

@@mitkine thank you :)

@paulluggar5964 Жыл бұрын

Difficult panel to make, nice to see a bead roller used. What decides if a joint is butt or lapp? Is it a technical choice or cost? It's definitely my favourite UTube channel, your workshop now looks 'worked in' with stuff everywhere! 👍🇬🇧

@yorkshirecarrestoration Жыл бұрын

thank you , usually the choice between butt and lapped panels is cost, butt welded panles take more time and therefore more money to do :)

@nickwillobey2205 Жыл бұрын

Nice is an understatement 😊😊😊!

@yorkshirecarrestoration Жыл бұрын

thank you Nick :)

@chrisparsons5422 Жыл бұрын

great camera work, everybody should have a domestic sized anvil like yours, very hady

@yorkshirecarrestoration Жыл бұрын

Thank you and yes they are very handy :)

@uh1200 Жыл бұрын

Nice work 👍

@yorkshirecarrestoration Жыл бұрын

Thank you :)

@mverbaan3381 Жыл бұрын

Absolutely astonishing fabrication skills from what seems to be 'just a shed' ! However i wonder is: how long will this hold? The rust prevention SEEMS just some zinc spray, which is a pity considering the amount of caring tlc. Another question: you SEEM to cut rusted parts first and than you start fabricating replacement body parts. How do you know the replacement part should look and fit, if the old part is gone (thrown away??) ? Am i right you use the panel on the other mirrored side as guide? Do you spotweld or seamweld the fabricated parts to the original body? Thanks for this video that is both relaxing and educational.

@yorkshirecarrestoration Жыл бұрын

Thank you. All jobs are protected after the job is finished with either access holes and neutraliser and Waxoil or they can be accessed from both sides so treated with paint or underbody treatment. As in the video we measure, make templates and use the original body part as a pattern. We seam weld all jobs after fabrication :)

@mverbaan3381 Жыл бұрын

@@yorkshirecarrestoration Thank you, i should not have worried :) Keep on the good work

@frostteddy3245 Жыл бұрын

Top grosses Kino !

@user-wr3ll7jw3v Жыл бұрын

Где ребята респираторы? Надо себя ценить!а BMW 👍!

@yorkshirecarrestoration Жыл бұрын

We forget :)

@fd4639 Жыл бұрын

Incredible skills and magnetic videos. I was hoping the car to be sandblasted or dipped down to bare metal

@yorkshirecarrestoration Жыл бұрын

Just rust repairs for this one , thank you for your support :)

@nabilkandil1847 Жыл бұрын

Bravo good job

@yorkshirecarrestoration Жыл бұрын

Thank you :)

@christee5772 Жыл бұрын

Great hammer skills.

@yorkshirecarrestoration Жыл бұрын

thank you Chris :)

@EMGP Жыл бұрын

You sir, are a master at your craft. Looking forward to more videos on this 😀

@yorkshirecarrestoration Жыл бұрын

thank you very much :)

@aceace5457 Жыл бұрын

a splendid video it ended early have you made any more .

@yorkshirecarrestoration Жыл бұрын

yes this series will be constantly made into KZfaq videos until we have finished with the rust :)

@aceace5457 Жыл бұрын

thank you ill be watching 😄

@a.c.4732 Жыл бұрын

In time to come , this kind of Art will be regarded in the same way as a Van Gogh / Picasso / Michelangelo I could relate to this vid because I had a beautiful ( exterior ) E39 , sadly rotten to the core underneath 😞 Went so far and had to give up ; there was nothing left "to weld to" .... Wish I had chosen this as a career , so much satisfaction each & every day .

@yorkshirecarrestoration Жыл бұрын

Thank you. Yes it's a very satisfying job and we do love our jobs :)

@jairivasmen Жыл бұрын

Hello! I am new to your channel, referred from Matt´s. You might want to write PART1, PART2..., in each video so we know where to begin watching a restoration :)

@yorkshirecarrestoration Жыл бұрын

thank you for your input :) also if you goto the playlist you can watch by the oldest :)

@jairivasmen Жыл бұрын

@@yorkshirecarrestoration actually you are right!! Greetings from Spain

@martinsadler707 Жыл бұрын

Come on boys, stop messing about with patches! Strip it and dip it - its the only way to know what you have to work with.

@yorkshirecarrestoration Жыл бұрын

its not our choice, thats not what the customer wants :)

@bernardoferreiro8134 Жыл бұрын

Un gran trabajo

@yorkshirecarrestoration Жыл бұрын

Thank you Bernardo :)

@333motorola Жыл бұрын

Wow pekná práca

@yorkshirecarrestoration Жыл бұрын

Thank you :)

@walterhugootto537 Жыл бұрын

un artista....

@yorkshirecarrestoration Жыл бұрын

Thank you :)

@khyron8509 Жыл бұрын

That there is my dream car ! it's a work of art just like your handiwork and I can only hope I can afford one before they are all gone and future governments decide I shouldn't be allowed to drive it anyway 👍 PS have you ever considered offering classes on bodywork ??

@drumtochtyglen Жыл бұрын

When is Steve going to get the time to do that.

@yorkshirecarrestoration Жыл бұрын

It is a stunning car. We have thought about it but we work 8am to 8pm six days a week so don't have time :)

@francispowell1811 Жыл бұрын

@@yorkshirecarrestoration there's that 7th day... 😉

@yorkshirecarrestoration Жыл бұрын

@@drumtochtyglen haha yes Eddie. You are so right :) 👍

@yorkshirecarrestoration Жыл бұрын

@@francispowell1811 I could do with a 9 day week 🤣

@desmomotodesmomoto2033 Жыл бұрын

Wonderfull, How long this job in this video took, from start to finish?

@yorkshirecarrestoration Жыл бұрын

don't know didn't count haha

@TEMPLARBAGGINS Жыл бұрын

::new car arrives at shop:: existing projects: "am I a joke to you?"

@yorkshirecarrestoration Жыл бұрын

We work on the all every week :)

@AMMA-we3zz Жыл бұрын

Two questions please: 1) Did you use 18 or 16 gage steel? 2) what was the distance from the door to the end of the arch panel you fabricated? Is it 49 cm or 50? I am referring to the distance you measured with a ruler. Thank you

@yorkshirecarrestoration Жыл бұрын

18 gauge steel for outer panels and 16 guage for structural steel, i check on distances :)

@Jurica_Ruic Жыл бұрын

Great job, but you are using the grinder without the safe guard😮

@chrisparsons5422 Жыл бұрын

Work of art, how is it that this well built car got in that state, i have owned a few Beemers, and all they ask is good service and a dry aircon garage, not left out in the rage of uk weather and obvious corrosion,, peoiple in the north of "Europe" should not be allowed to own a fine car without the means to take care of it, they can have a pathetic e. scooter instead

@yorkshirecarrestoration Жыл бұрын

People generally don't take as much care of the underneath of a car or panels as they should :)

@SHADOWDAEMON666 Жыл бұрын

You welded the new arch over the old one, then cut through to remove the old panel. is that to keep the original lines?

@yorkshirecarrestoration Жыл бұрын

It's the easiest way to get a perfect fitment before butt welding it in :)

@stewartshackleton7825 Жыл бұрын

Saw that method on Fitzee’s Fabrication as well. A good job well done. Thanks for the content.

@yorkshirecarrestoration Жыл бұрын

@@stewartshackleton7825 yes it's a technique use quite often in the industry :)

@dee106ful Жыл бұрын

Excellent workmanship. Shame no audio.....

@yorkshirecarrestoration Жыл бұрын

plenty of music , just im not a big talker, id rather work :)

@philf5043 Жыл бұрын

One of the best cars I ever had . Pity the tin worms thought the same.

@yorkshirecarrestoration Жыл бұрын

we will make it good again Phil :)

@Star69ca 5 ай бұрын

Стекла береги.

@francispowell1811 Жыл бұрын

Was that diagonal slit againt the butt, at the top of the patch panel, to relieve tension? Hmm...

@yorkshirecarrestoration Жыл бұрын

It was actually to release the peice of metal on the rear that I had cut alone but wanted to detach on the inside :) but good guess :)

@bavariansharks7149 Жыл бұрын

👍👍👍

@yorkshirecarrestoration Жыл бұрын

@art6p Жыл бұрын

Тут становиться понятно насколько хорошо в России ремонтируют машины

@yorkshirecarrestoration Жыл бұрын

Yes the previous repair wasn't good.

@gobodrodiont Жыл бұрын

14:20 почему не срезал или хотя бы не обточил старую ржавую кромку на арке крыла?

@yorkshirecarrestoration Жыл бұрын

Watch the next few vids you will see that's tackled from underneath later.

@sats7819 Жыл бұрын

Lovely work but are you not going to address the rusty bits that join?

@yorkshirecarrestoration Жыл бұрын

yes when we get it on a ramp later :)

@YootubeUK Жыл бұрын

I can't believe you're cutting all of that clag out of that 635. Do you know how long it took me to mix that up? Pffft.... (BTW, I think you'll find some newspaper, kitchen foil and shutz there too if I remember rightly.) You're welcome!

@yorkshirecarrestoration Жыл бұрын

we have found that before :)

@YootubeUK Жыл бұрын

@@yorkshirecarrestoration That was probably me too.... :/