DIY Rust Repair ?

DIY Rust Repair ? - BMW E24

Рет қаралды 64,838

Жыл бұрын

in this video we continue on the BMW E24 rear arches and rear window surround.
If you enjoyed the video, smash that Like and subscribe button & comment your thoughts down below. It really helps us out!
Check us out on Instagram - / con. .
Check us out on Facebook - / yorkshirecar. .
Check us out on TikTok - / yorkshirecarr. .
Check out the first part in this series where we show you around the car and our initial thoughts:
• Abandoned Datsun ...
Check out our 1980 Suzuki LJ80 restoration playlist!:
• Introducing our B...
Check out our other how to and rusteration videos:
Mk2 MX5 Rusteration:
• Can we Fix the Ru...
MX5 How-To videos:
• How to Remove a M...
Check out the little classic mini restoration!:
• Classic Mini
Check out our MX5 V6 Conversion!:
• MX5 V6 Build
We also have much more content on our playlists as well as big plans for the future!
---MUSIC--- In Order--
🔻
"Markvard - Dreams" is under a Creative Commons (CC BY 3.0) license.
/ channel
Music promoted by BreakingCopyright: bit.ly/bc-dreams-song
🔺
---------------------------
"THBD - Lost In The Night" Attribution 3.0 Unported (CC BY 3.0)
Music provided by BreakingCopyright: bit.ly/thbd-lost-in-the-night
Facebook - pipamoranmusic
Twitter - @pipamoran
Soundcloud - www.soundcloud.com/pipamoran
---------------------------
🔻
Song: "Sappheiros - Falling (Ft. eSoreni) [Chill]" is under a Creative Commons license (CC-BY)
Music promoted by BreakingCopyright: bit.ly/Sappheiros-Falling
🔺
--------------------------
Song: Vorsa - If Only You Knew
Music provided by BreakingCopyright: bit.ly/vorsa-if-only-you-knew
---------------------------
🔻
"Sappheiros - Embrace" is under a Creative Commons license (CC BY 3.0)
/ sappheiros
Music promoted by BreakingCopyright: bit.ly/embrace-song
🔺
🔻
"Alex Productions - Alone" is under a Creative Commons (CC BY 3.0) license.
/ @alexproductionsnocopy...
Music promoted by BreakingCopyright: bit.ly/bc-alone-song
🔺

Пікірлер: 207

@thefreedomguyuk Жыл бұрын

E24, in my opinion, most beautiful BMW ever !

@cmarsili4724 Жыл бұрын

100% agreed. Hats off to Paul Bracq, the original designer.

@jorgex1604 Жыл бұрын

Agreed. Your comment made me think about my late father. He once said he really liked the engine in my BMW E24. But it was a pity the design was so simple and dull. He drove a Citroën DS himself lol. There was iust no other car for him I guess 😅.

@yorkshirecarrestoration Жыл бұрын

they are a good car :)

@chrisjbraithwaite Жыл бұрын

I have a G82 and can only agree 😅. I did buy it for its ugliness

@stuartwest3822 Жыл бұрын

Admire the old school repairs, a true skill set, metal works, welding etc!

@hawkbulletproof7635 Жыл бұрын

I'm so grateful the MA channel turned me on to you guys! I've been watching car restoration videos a long time and have never seen anything like this! Truly unique and masters of your craft! Thanks for showing me what's possible and giving these old cars new life, I love it!

@jeffhammond8969 Жыл бұрын

Fabrication art! Not many that have your level of skill and artistry.

@yorkshirecarrestoration Жыл бұрын

thank you Jeff , it is a dying trade , one reason we share it :)

@ryszard999 6 ай бұрын

What distinguishes this channel is not only skills, the art of work, but there is no unnecessary philosophy and constant talking, talking and more talking - instead of talking there is work and I love it (nice background music) thank you for every video

@jerryshepherd6528 Жыл бұрын

The 27 or so minutes of the video is no reflection as to how many hours go into what looks like a simple repair. Keep them coming.

@yorkshirecarrestoration Жыл бұрын

haha it did take longer than 27 mins :)

@billywhizz98 Жыл бұрын

Incredible fabricating skills

@yorkshirecarrestoration Жыл бұрын

thank you William :)

@stephenandrews5210 Жыл бұрын

Can never understand customers who moan about the price of bodywork this just shows you the level of skill and time effort put into a proper repair well done guys love you work

@jimmypratt6450 Жыл бұрын

Sorry but i can't get my head around what you guys do (brilliant) i've been there and its such a heartache at times . You deserve the top dolllorr without a doubt 💗💗💗

@yorkshirecarrestoration Жыл бұрын

thank you Jimmy we really do appreciate that :)

@tonynightingale4400 Жыл бұрын

Hi Steve Absolute amazed even more than I have in the past at your skill in fabricating skills.....5 stars are not enough, I'll give 101 stars ...lol.😀😀😀😀😀😀😀😀😀😀😀😀😀

@yorkshirecarrestoration Жыл бұрын

Thank you Tony :)

@PGUNNA201 Жыл бұрын

Nice to see that there are still people willing to do this type of work. Every bodyshop around me would just tell you to junk it

@yorkshirecarrestoration Жыл бұрын

its the same everywhere , nobody seems to want to put the work in nowdays :)

@tonygoshive785 Жыл бұрын

The way you are able to make the repair almost invisible is incredible. Just want to thank you guys for making these videos, Learnt a lot from you guys - doing some repairs on the transit, keep grinding, Keep finding more rusts 😂 been a few weeks and still finding more. Unlike your work, it appears One side of the wheel arch had been lap welded three times, always wondered why one side of my arch is thicker. Well now I know 😂

@yorkshirecarrestoration Жыл бұрын

Arrg just keep on it Tony, it will be worth it :)

@nickwillobey2205 Жыл бұрын

When my E46 gets tired, I'll come and see you!😊😊😊

@yorkshirecarrestoration Жыл бұрын

haha thank you Nick :)

@drumtochtyglen Жыл бұрын

You appear to be making shapes out of thin air and they fit well. While you make it look easy, there is no doubt that there is years of experience in those hands and eyes of yours. As always just wonderful work yet again.

@yorkshirecarrestoration Жыл бұрын

Thank you Eddie :) you support is always appreciated, I have done this for a.few years :)

@philtucker1224 Жыл бұрын

About 35 years ago I was staying in a small boutique hotel in Exeter U.K. The owner had a beautiful black 635csi fully loaded and immaculate. His pal had a similarly specked 911 Turbo, both parked in the courtyard of the hotel. It was a warm summer’s evening. I really didn’t want to go to my room that night.

@leofabbro456 Жыл бұрын

Hi Steve. Nice mix of metal and german lace. As usual astonishing mastery.

@yorkshirecarrestoration Жыл бұрын

Thank you Leo :)

@budgiegamer3314 Жыл бұрын

CONGRATS on 20k subscribers , best channel on KZfaq

@yorkshirecarrestoration Жыл бұрын

haha thank you, we try our best and will continue to hopefully improve :)

@The-truth-is-valuable. Жыл бұрын

Quality repair work. Without these skills and dedication, so many of these older cars will disappear.

@yorkshirecarrestoration Жыл бұрын

we beleive they would also hence why we do our best to recover what would be cars lost to rust. :)

@tonyttswj8261 Жыл бұрын

This is so satisfying to watch!! This guy can fabricate anything!!

@mercedes_and_more Жыл бұрын

Good evening from Germany. Can’t believe how you skimpt on that inner chassis re-inforcement. Cutting corners and not even matching the hole in the original rusted out piece that no one will ever see! 😂😂😂😂

@melbice9906 Жыл бұрын

Loving your videos guys, great camera work really demonstrates how much actually goes into your invisible repairs. Thank you so much for the immense amount of time you must put into producing this content, adding to already busy days. 👏👍🙏🇦🇺

@yorkshirecarrestoration Жыл бұрын

thank you Mel, yes each 20 min video dose take a lot of work but we will continue to try and improve our content for you to continue to enjoy :)

@johnboy384 Жыл бұрын

Watching the forming of replacement sections of panel-work is an art form all its own. Thanks.

@yorkshirecarrestoration Жыл бұрын

thank you its also fun :)

@aalabbasi Жыл бұрын

You know after spending the whole day banging away on the keyboard. I find watching you form metal on my 65" TV with house music playing in the background to be quite therapeutic

@yorkshirecarrestoration Жыл бұрын

haha thank you :)

@bobfrankish8883 Жыл бұрын

Fantastic work as always Steve. The E24 635CSi is one of my all time favourite cars. There were so many of these scrapped for rust issues, looking at this it is easy to see why. There are very few people left that are skilled enough to make cost-effective repairs like you do. Well done again.

@yorkshirecarrestoration Жыл бұрын

Thank you Bob :)

@jessman1004 Жыл бұрын

I enjoy the way you rostfrei these Carsten. Perfekt job😊!

@yorkshirecarrestoration Жыл бұрын

haha thank you :)

@yochemin Жыл бұрын

Impressive work, both the metal and camera, most relaxing to watch, Cheers

@yorkshirecarrestoration Жыл бұрын

Thank you very much!

@starrpuruto588 Жыл бұрын

Master metal man Steve teaching the skills thanks sir I'm learning so much

@yorkshirecarrestoration Жыл бұрын

its my pleasure glad the videos are of use :)

@kinanzeno5478 Жыл бұрын

That’s some art and skill work. Love your content ❤

@user-cd4ny3ei1e Жыл бұрын

Golden hands 🙌

@yorkshirecarrestoration Жыл бұрын

thank you :)

@stevey-nwas1230 Жыл бұрын

Great quality work steve 👏👏👏👏👏👏👏👏👏👏👏👏 Not many so called big reputable restoration garages/business out their , do this kind of quality work and do it right 1st time !!! When my classic car needs any body work , am going to bring it to you !!!👌👌👌

@joescully566 7 ай бұрын

Quality work as ever Steve, you've helped me so much with my own project taking it to a whole new level, thanks again, Joe

@HairpinMagazine Жыл бұрын

Work of an artist.

@yorkshirecarrestoration Жыл бұрын

Thank you :)

@georgeclements2742 Жыл бұрын

Another good one, and just a thumbs up and comment for the algorithm. Regards.

@yorkshirecarrestoration Жыл бұрын

Thank you George it dose help :)

@IMMORTALDIO Жыл бұрын

Im looking forward to seeing Matt's BMW worked on.

@yorkshirecarrestoration Жыл бұрын

there are going to be constant videos of the whole process :)

@craigwoodfolk3240 Жыл бұрын

Amazing craftsmanship.

@yorkshirecarrestoration Жыл бұрын

thank you Craig :)

@davidmckinney6577 Жыл бұрын

That's some really awesome 👌 work my friend thank you guys for the upload I just watched this video and I have another idea how I can make a metal bender with 3 pipes from the one I saw you use I made one already to make square bends. Well I know one thing that car is going to be fixed right ✅️..you guys are the best I love ❤️ this channel its my favorite channel on KZfaq it has helped me so much with learning how to do different things.

@yorkshirecarrestoration Жыл бұрын

thank you David we do appreciate the support and kind words :)

@nigeljohnson505 Жыл бұрын

Genius. Absolutely mesmerising. Thanks.

@yorkshirecarrestoration Жыл бұрын

Thank you Nigel :)

@TheDaf95xf Жыл бұрын

Steve it’s a real pleasure watching you do your magic with a sharpie and a bit of tin lol 😆

@yorkshirecarrestoration Жыл бұрын

haha thank you steve :)

@kees2thdr Жыл бұрын

Love to see your video’s. Great workmanship 🙏👍🏻

@yorkshirecarrestoration Жыл бұрын

thank you we appreciate the support :)

@willydremble43 Жыл бұрын

Magnificent ❤

@paulbateman3001 Жыл бұрын

Well Steve you have done it again another great repair and made proper safe again great workmanship top man

@yorkshirecarrestoration Жыл бұрын

thank you Paul , appreciate it :)

@davechapman5815 Жыл бұрын

Gonna need to buy in a boatload of sheet steel to patch up Mats' 635 😁

@yorkshirecarrestoration Жыл бұрын

yep its a little worst thank this one but not as much work as the disaster Datsun we are doing , go have a look :)

@colinritchie1757 Жыл бұрын

Dear me Steve , the more you look the more you find seems appropriate here , I really don't envy you this one - Excellent video presentation as ever as well

@yorkshirecarrestoration Жыл бұрын

thank you Colin :)

@curtraaymakers6777 Жыл бұрын

Lovely work 😎

@yorkshirecarrestoration Жыл бұрын

thank you Curt :)

@philwarwick4287 Жыл бұрын

Play a bit of Neil Diamond as the back ground music and I could watch this skill, craftmanship and trail until it fits all. Shame of the copyright on Neil. Great work guys. Great cars to work on

@yorkshirecarrestoration Жыл бұрын

yer don't think Neil would be happy :)

@chrisbuckland8389 Жыл бұрын

As always brilliant to watch inspires me to keep going on my series 5 alpine.

@yorkshirecarrestoration Жыл бұрын

just keep plodding and don't give up Chris :)

@philtucker1224 Жыл бұрын

Rare car! - keep going Chris! 🙏👍

@romeldphillips3146 Жыл бұрын

Excellent job

@yorkshirecarrestoration Жыл бұрын

thank you :)

@claireparkinson2044 Жыл бұрын

Great stuff ❤

@yorkshirecarrestoration Жыл бұрын

thank you :)

@ivorroundlobe5036 Жыл бұрын

Hi Steve. Thx for execellent videos.

@yorkshirecarrestoration Жыл бұрын

no problems at all Ivor, thank you for watching :)

@charliecoco2115 Жыл бұрын

Top Class!👍

@yorkshirecarrestoration Жыл бұрын

Thank you :)

@bishbosh1808 Жыл бұрын

Give me an old skool BMW to a modern one any day

@yorkshirecarrestoration Жыл бұрын

same here :)

@h2ouxb 5 ай бұрын

Well done. Grate talent 💪👍

@sleish85 Жыл бұрын

Wow did your blood lines makes swords for kings and warriors or something? I just subscribed from matt Armstrongs channel and all a can say is I'm glad I did! True craftsman 👍

@yorkshirecarrestoration Жыл бұрын

haha thank you its just a satisfying job :)

@TheLeeattwood Жыл бұрын

That takes skill and patience, which I have none off . Great job

@yorkshirecarrestoration Жыл бұрын

with a little practice :0

@robundjacq Жыл бұрын

Masters at work

@yorkshirecarrestoration Жыл бұрын

thank you Robert :)

@YootubeUK Жыл бұрын

Very nice work! I need to get me a bead roller & a shrinker, stretcher!

@yorkshirecarrestoration Жыл бұрын

they are prolly the only tools that cost a little bit :)

@ukaypete Жыл бұрын

Another interesting restoration video....I like the quality of your repair panels that will not be seen when a panel is fitted over the top...ps I also own a Manta, what work is being carried out on the Orange one in the background?

@yorkshirecarrestoration Жыл бұрын

Hi yes I like things to be correct underneath as well so the car is as good as possible :) the open manta is having rear arches on as someone has welded over rust in the past.

@lenniewood1770 Жыл бұрын

Great knowledge greg that's why we watch your builds

@yorkshirecarrestoration Жыл бұрын

thank you Lennie :) im guessing you ment steve haha :)

@lenniewood1770 Жыл бұрын

@@yorkshirecarrestoration yes sorry me and phones lol

@512Berlinetta Жыл бұрын

It's amazing how the Brits are not afraid of rust, but here in American it turns into a massive massive expense for even small jobs and even then it's shoddy work!

@yuraschurski5326 6 ай бұрын

Приветствую. Вы пластические врачи автомобилей. Молодцы!

@BigPaul62 Жыл бұрын

That wheel arch has got more pudding than Sainsbury's.

@yorkshirecarrestoration Жыл бұрын

and Sainsbury's have a lot of puddings :)

@peterkesters7740 Жыл бұрын

Nicely made. I would like to have that knowhow. Grts

@yorkshirecarrestoration Жыл бұрын

thank you Peter :)

@carswithcrackers Жыл бұрын

I'm amazed you guys haven't done a pedal conversion/upgrade on your shrinker/stretcher yet.

@yorkshirecarrestoration Жыл бұрын

Haven't had time:)

@lackodhr.5303 Жыл бұрын

👏👏👏

@yorkshirecarrestoration Жыл бұрын

@paullazenby2729 Жыл бұрын

Great work....eggs me on 😊...what brand/style wire wheels do you use in the grinder ?...they seem to work well...

@philtucker1224 Жыл бұрын

Very nice music.

@grahamdavidson6819 Жыл бұрын

Fantastic again. One question your power file abrasive belt seems to last a while, could you tell me make as I have been restoring my Dad's and the belts keep splitting and snapping. Many thanks Graham

@b4gga83 Жыл бұрын

Stunning work, rather than having music playing over the video - are you able to give a voiceover instead. Would be nice to have your insight.

@yorkshirecarrestoration Жыл бұрын

sorry we do try when we have time but unlike other channels this is done in our spare time we we have full time jobs so no able to as its more time consuming, its a chore keeping up as is :)

@nickthegreek8717 Жыл бұрын

Fantastic work 👍👍👍 Watch all your videos they are all great 👍👍👍👍👍

@yorkshirecarrestoration Жыл бұрын

thank you Nick :)

@roger2612 Жыл бұрын

👌👍

@yorkshirecarrestoration Жыл бұрын

Thank you :)

@KEKEMS001 Жыл бұрын

👍

@yorkshirecarrestoration Жыл бұрын

@lrdisco2005 Жыл бұрын

I thought for a moment the bead roller was getting a new stand just like the shrinker/stretcher.

@yorkshirecarrestoration Жыл бұрын

the bead roller will be fastened down shortly:)

@chrisparsons5422 Жыл бұрын

Respect, i could only help by making brews, sweeping and washing, no laundry thoughgreat range of equipment and tools the "little" anvils are great, bet you have a 14lb hammer somewhere/

@yorkshirecarrestoration Жыл бұрын

Definitely a skill makeing cuppas :)

@douglastodd1947 11 ай бұрын

wait until you get into the back box sections holding the rear axle etc. eye opener .

@jimzucker Жыл бұрын

i think that in the u.k. instead of having the right hand side by default they should have stainless steel cars

@yorkshirecarrestoration Жыл бұрын

would make for easier jobs :)

@TheHolyCowl 10 ай бұрын

What a big difference between your quality repairs versus that of a cheaper body shop. Yours will last a lifetime, while their goal is typically to cover up the damage, hoping it will last a couple years at most. Do they make quarters for this particular vehicle? If so, wouldn't that be a more efficient way to go?

@tomstoddart-scott173 Жыл бұрын

Is there a reason you aren’t using weld through primer?

@tissapathiratna7761 9 ай бұрын

Iam more interested in Cosmo .where is it?? Like to see finished project 💖

@jamesward5721 Жыл бұрын

Bench mount shear arrived monday - dead useful bit of kit, should have bought one years ago - so thanks for that tip, Steve. Nice job on the lower screen surround - those can be "Fun". I tend to just make them in 2 pieces & weld them - purely for speed/ease - but making a 1 piece repair is better. Different ways to skin a cat but the cats still skinned. :-)

@jamesward5721 Жыл бұрын

Had to weld the entire center back into a fords roof today btw - sunroof section underneath was borked, as was the underside of the roof itself - hence the outer roof got cut off. Sweet moG.... must have been 3 meters of weld or close. Because there's no way of re-tensioning the panel, it flopped about like a sail after - had to form braces for the underside to get the shape/ridgidity back & spot weld those in. It goes on the list of "Hardest repairs I've run across" - wouldn't be in a rush to do another. Nowhere else would touch it - and I know why.

@yorkshirecarrestoration Жыл бұрын

It is a useful tool :)

@jamesward5721 Жыл бұрын

@@yorkshirecarrestoration "Need a long 10mm strip? Ballache with the grinder... doddle with the bench shears. :-)

@jorgemairena2289 Жыл бұрын

Siendo tan ducho en lo k hace porque el taller no esta mas concurrido de trabajo? YO lo felicito.y saludos

@mevanc7304 Жыл бұрын

Just a quick question. How Would you paint the bare metal inside the areas you boxed in? Is it good to apply welding primer before boxed them in? Again just curious

@yorkshirecarrestoration Жыл бұрын

there aren't any areas boxed in yet as the sills we have to repair the inside and bottom from underneath the car yet and the inner arch is accessible from inside the boot an inside the cab, weld through primer or any primers aren't that good as they still flash off where the weld is applied and all other primers are flammable so no good to use when welding, in my 30 years doing this its better to finish the job then seam seal and primer where you can after the job , then drill holes and apply cavity wax where you cant prime, also make sure there are drain holes where needed :0

@chrisneillcrn Жыл бұрын

😷👍

@yorkshirecarrestoration Жыл бұрын

@philf5043 Жыл бұрын

Do you follow up repair with any waxoil or similar inside the panels ?

@yorkshirecarrestoration Жыл бұрын

yes always :)

@marctiplady1796 Жыл бұрын

Id love to have the rear inner/outer arches and sills replacing on my Mk4 Astra Gsi but i know i wont be able to afford it doing.

@yorkshirecarrestoration Жыл бұрын

we aren't expensive :)

@marctiplady1796 Жыл бұрын

That sounds good to me then ive messaged you on your fb page.

@barryhall7 Жыл бұрын

The filler work is definitely in keeping with the age of the car 😂 Great video 👍🏻

@yorkshirecarrestoration Жыл бұрын

yes seems to be a period repair :)

@halldorra Жыл бұрын

Brilliant job

@yorkshirecarrestoration Жыл бұрын

Thanks!

@korkiar6363 Жыл бұрын

ฝีมือดี

@markhaith4720 Жыл бұрын

Is there any need to strengthen the frame on these coupes in your view?

@yorkshirecarrestoration Жыл бұрын

not really :)

@davidbeckett7291 Жыл бұрын

More great work Steve. - as to the most beautiful BMW us old ones remember the 507 is the very best ( or maybe 503 if you are even older)

@yorkshirecarrestoration Жыл бұрын

thank you David i think we know your DB6 is also very beautiful :)

@karenmurray3098 Жыл бұрын

hi steve , you ever get nervous cuting big chunks out of rare cars like this BMW or the porsche ?

@yorkshirecarrestoration Жыл бұрын

Hi Karen , no i cant wait to get cutting as i enjoy putting good metal back in :)

@francispowell1811 Жыл бұрын

👀 !!

@yorkshirecarrestoration Жыл бұрын

@sheldonpearce2365 Жыл бұрын

U should let matt have this shell lol

@cybersurfer2010 Жыл бұрын

Very beautiful cars… but crustie after so many years!

@yorkshirecarrestoration Жыл бұрын

They are :)

@baboneya Жыл бұрын

What are the bender tools called on stand at around 3:10?

@yorkshirecarrestoration Жыл бұрын

that's a sheet metal stretcher, the other is a shrinker :)

@eduardobarone3547 10 ай бұрын

forse di seconda mabo con lo stesso costo se ne trovava un ato migliore più fresca

@andrewthrossell4053 Жыл бұрын

One person's skim of filler is another person's bodge.frightening

@yorkshirecarrestoration Жыл бұрын

scary at times haha

@johnwarthan2675 Жыл бұрын

The cars like that with a lot of rust why didn't you dip it to take care to make sure all that is good metal just curious

@yorkshirecarrestoration Жыл бұрын

Because dipping it costs a lot more money including completely stripping, removing engine, steering, drive train, lights, wiring loom then there is the dip, then there is fully reassembling it and fully priming and painting it etc. It's not in the customers budget. :)

@johnwarthan2675 Жыл бұрын

Thank you very much for your response back. Have a great day

@yorkshirecarrestoration Жыл бұрын

@@johnwarthan2675 that's no problem John :)