BMW E36 Oulton Park 15th February 2023
Рет қаралды 1,001
Күн бұрынM50B25 Block, M54B30 Crank, Wiseco Pistons (84.5mm), Forged Steel H-Beam Connecting Rods, 12.5:1 Static Compression Ratio, 45mm Jenvey ITBs, Stock M52 Head, CatCam Camshafts, CatCam Springs + Retainers, Bosch EV14 550cc Injectors, ECUMaster EMU Black Standalone Management, M20 Flywheel, Helix Paddle Clutch, ZF S5D310Z Gearbox, 3.64 Ratio Kaaz LSD, Nitron Racing Suspension (Built by Spires), Custom Roll Centre Corrected Front Hubs, 17x9 Team Dynamics Pro Race 1.2, 255/40 Nankang AR-1 Tyres, 1150kg.
@RyanBurisch Жыл бұрын
Been following your stuff for years, thanks for the content. Tried to read your forum thread of the original black 2 door you built on pistonheads, but all the links to the photos are down :( - Also what shifter is that you have in this car?
@f0xxxy Жыл бұрын
Unfortunately the pictures went a long while ago. I kept another thread up to date for a while on ClioSport but then lost the ability to reply to that as I'm not a 'paid' member of the forum. I tend to just post bits on Instagram every now and again whenever something significant changes now. Its a CAE shifter 👍
@r129r16pfl Жыл бұрын
No plans on getting it lighter? Under 1100kg
@f0xxxy Жыл бұрын
I could remove the passenger seat and frame, and it will be under that... but I have no need to. There isn't much else to save, it already has some lightweight panels. You could use lighter wheels, or run less fuel load, but it's only being used for fun now really.
@chris-graham Жыл бұрын
What's your pedal setup? I'd like to move to a dual master soon
@f0xxxy Жыл бұрын
Tilton 600 Series Floor Mounted 👍
@chris-graham Жыл бұрын
@@f0xxxy What size masters? What calipers/rotors? Where's your balance bar on a dry day?
@f0xxxy Жыл бұрын
@@chris-graham AP Racing CP2623 0.625" / AP Racing CP2623 0.700" Cylinders. Porsche 996/C4S Brembo Front Calipers, 315x28 E36 M3 Disc, Pagid RS29 Pads. E36 M3 Evo Rear Calipers, 312x20 E36 M3 Disc, Pagid RS29 Pads. Bar position, couldn't say specifically, its been changed from time to time on tyres and surface condition, I have a remote adjuster that I wind either way if I decide it needs more or less 👍
@chris-graham Жыл бұрын
@@f0xxxy thanks so much!
Camber & Combustion
Рет қаралды 14 М.
DutchMotorsport
Рет қаралды 17 М.
Mr 89FP
Рет қаралды 10 М.
Khurmatillo
Рет қаралды 1,3 МЛН