This is great because these newer calipers are about $200 cheaper than the popular 135i calipers
@finacialfreedomfighters Жыл бұрын
I replaced my front hubs doing this and they do not even come with the studs for centering the disk so it would be dangerous. I ordered the spacers thanks for the vid!
@rabbit4U Жыл бұрын
Where did you find the spacers? Any link? I can't find any . Thanks
@salvadortena71739 ай бұрын
Looking for same thing
@IE46M38 ай бұрын
Great void’ Any links for the washer spacer ?
@keronsmith84595 ай бұрын
We’re did u find the spacers can u send me the link please
@keronsmith84595 ай бұрын
Can u send me the links to the spacers please
@vysgarage Жыл бұрын
Shim spec: M40x50mm, 2-2.5mm thick. Lines: E46 m3 with e9x unions and additional 30-50mm in length.
@LunasGarage5 Жыл бұрын
Where did you source those washers
@vysgarage Жыл бұрын
@@LunasGarage5 ebay
@IE46M38 ай бұрын
@@vysgarage Great vid, do you have link to these washer spacers? Can’t find them anywhere. Thank you in advanced
@vysgarage8 ай бұрын
@@IE46M3 2mm, m40 by 50mm www.ebay.co.uk/itm/253448405353?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=lzbdE57DSHe&sssrc=4429486&ssuid=jzxtgpbztkw&var=&widget_ver=artemis&media=COPY
@IE46M38 ай бұрын
@@vysgarageGreat Thank you so much 👍
@Armanis_ Жыл бұрын
Very good video ! 🤌🏽
@leekindell9937 Жыл бұрын
@bircklean detailing i have just got a set for my m3. where do i get the 3mm washer spacer from
@braedenbonhommeАй бұрын
Any luck finding the spacers?
@vysgarageАй бұрын
Yes, I sell them as a kit
@mrz1118 ай бұрын
where can i found 380 discs? I've already calipers and i want to fit on Z4 e86 with 18 wheels
@pjpr328710 ай бұрын
Great video. Going to implement it to my e36. Would this upgrade work using e36 evo m3 hub using same method with the spacer? Thanks
@vysgarage10 ай бұрын
Hi I’m not sure about the evo hub geometry so can’t advise you. Sorry
@pjpr328710 ай бұрын
@@vysgarage hi Thanks
@johnvarney184410 ай бұрын
What about wheel fitment after fitting these calipers
@crz1364 Жыл бұрын
Hi great vid! Is it worth doing with the 340mm calipers or waste of time?
@vysgarage Жыл бұрын
It’s an option but if you use vw t5 discs. With csl discs, is not worth it because the pad doesn’t sit right.
@NELGICH1995 Жыл бұрын
Hey Mate, just discovered your channel and wanted to thank you for detailed and professional explanation. Do you know If theres any similar way to fit these calipers on a non m-e46? Greets!
@vysgarage Жыл бұрын
Hi, Yes there is. Please pm me on facebook. 👍🏻
@NELGICH1995 Жыл бұрын
Any other way to contact you? Unfortunately I don't use FB.
@vysgarage Жыл бұрын
Vys.autowerks@gmail.com
@darrenboston342 Жыл бұрын
Sent you an email today bud 12th June, left my mobile, thanks Daz
@King_Sok6 ай бұрын
Great vid. Where can I buy the adapter kit ?
@vysgarage6 ай бұрын
Pm me on insta or Facebook
@Vyker Жыл бұрын
Why do you think all the new M and M lite cars are being shipped with floating rear calipers and not fixed ones? (I think they look ugly)
@vysgarage Жыл бұрын
In my opinion it’s only to save cost.
@halimosmani8300 Жыл бұрын
What adapter are you using for the calipers?
@danyan7 Жыл бұрын
none
@bull7618 Жыл бұрын
Is this upgrade possible on the e46 non m without swapping in m3 knuckles?
@vysgarage Жыл бұрын
Yes
@harrisj2278 Жыл бұрын
Are these able to be fitted on an e90/92 chassis? Both front and rear?
@vysgarage Жыл бұрын
Depends on model. Which e92 do you have ?
@harrisj2278 Жыл бұрын
@@vysgarage I have a pre lci E90
@vysgarage Жыл бұрын
It is an m3, 320i, 330i, 335i?
@eduardolima8560 Жыл бұрын
Do the F80 calipers and 380mm rotors bolt up to the e46 330ci knuckles with no washer or do they require a washer like the 340mm calipers?
@vysgarage Жыл бұрын
I haven’t tried, but they should.
@eduardolima8560 Жыл бұрын
@@vysgarage do you think this setup can accommodate 18” wheels?
@vysgarage Жыл бұрын
@@eduardolima8560 yes, most of them
@martsmarts3 ай бұрын
Will this be compatible with a non M e46? For a 330ci?
@vysgarage3 ай бұрын
It’s slightly different on non-m. See my other video
@michaelrawlings37856 ай бұрын
Hi do you do this as a package.. I’m based in uk over in Berkshire
@vysgarage6 ай бұрын
Hi, I do 👍🏻
@michaelrawlings37856 ай бұрын
@@vysgarage would you like me to send my email so you can send prices .. I don’t mind some used parts
@michaelrawlings37856 ай бұрын
Iv emailed you thanks for responding back on here
@basterbogt11 ай бұрын
I bought a set from an f30, but it isnt the 340mm one. Its the 370mm. Are those the same as the f8x?
@vysgarage11 ай бұрын
Yes they are the same 👍🏻👍🏻
@basterbogt11 ай бұрын
@@vysgarage thanks alot, it makes it alot easier to find parts. My f30 set only has 345 mm rotors in the back. Dont know if thats the same compared to the f80 370mm
@vysgarage11 ай бұрын
@@basterbogt the Calipers are exactly the same. 👍🏻👍🏻
@basterbogt11 ай бұрын
@@vysgarage so ordering f80 rears will work fine?
@vysgarage11 ай бұрын
@@basterbogt yes
@noemartinez798 Жыл бұрын
Any brembo upgrade for an e39?
@vysgarage Жыл бұрын
I’ve been asked this question so many times but I haven’t done anything with e39 yet, so I just went and ordered an e39 front hub to come up with a solution. Watch this space 🙂
@sr20dett10008 ай бұрын
What needs to ne done to fit E46 non m?
@vysgarage8 ай бұрын
Just need to space the Caliper with m12 washers.
@sr20dett10008 ай бұрын
@@vysgarage Thank you. What about in the rear?
@vysgarage8 ай бұрын
@@sr20dett1000 rear isn’t that simple. I did a video about using e82 rear Calipers.
@sr20dett10008 ай бұрын
@@vysgarage the rears is easy with 135i Brembo calipers on E46 330i using E46 m3 rear rotors. Saw you post about using 340mm front rotors. Here we don't have vw transporter. I'm thinking of using 345x30 rotors from a 2016 Chevrolet Camaro SS, hat height is 61mm. Will need to check the rotor swept area.
@mrz11110 ай бұрын
18 wheels? Or 19?
@vysgarage10 ай бұрын
19, but 18 will also fit
@dumbeezy54808 ай бұрын
@@vysgarageI have an e46 zhp with stock wheels. Would these fit without problems?