BMW E60 530i OIL CHANGE, AIR AND CABIN FILTERS REPLACEMENT DIY

Рет қаралды 29,876

4 жыл бұрын

Changing oil and filters on 2009 BMW 530i E60 gen. It´s a pretty easy and strait forward DIY job and no special tools or lift are required. All the tool sizes and torque specs in the video and below.
I used Shell Helix Ultra 5W-30 approved by BMW, meeting the BMW LL-04 specs.
Torque specs:
- oil filter cap - 25 Nm
- drain bolt - 25 Nm
Socket sizes:
- 8 mm socket - splash shield
- 17 mm socket - sump plug
- 13 mm socket - cabin filter
This guide works for me. But I´m not a professional, so no guarantee here... Follow this at your own risk.
Especially the engine flush. If you choose to use it, consider the state of your engine. If it has been neglected, it could loosen large chunks of deposits and block oil passages.
If you have any questions or constructive coments, let me know.
Take care.

Пікірлер: 45

@XPabloNcl28X 5 ай бұрын

It’s my first time doing a oil change and this is the best successful tutorial ever.

@DIYProjectX 5 ай бұрын

Thank you very much my friend.

@CTRstocks 3 жыл бұрын

I have watched several videos for oil change on an e60, but yours was the absolute best. From the start you listed all the parts and tools needed, no rambling intro like others about, "well I have this car that needs some work, it's a... and so today I'm gonna show, oh sorry about my dog barking...". But the exact moment I was sure I liked your stuff was when I saw that "professional floor mat". LOL, That was awesome! Great video.

@DIYProjectX 3 жыл бұрын

Thanks so much, this means a lot. This is what I aim for in my videos, getting straight to the point and trying to be very clear. Besides, I am no youtuber so I feel like I don´t need to pass on any messages. I´m changing the oil (or whatever else) and that´s it. Thank you again for your feedback.

@CTRstocks 3 жыл бұрын

@@DIYProjectX One of multiple reasons I watched yours after 3 or 4 others is because some E60 have the oil plug aligned horizontally out the side, while others are vertically, like yours and mine. Don't know which years are H or V, but anyway. Mine is 2009. One other useful tip for any viewers reading this is while the oil is draining, if you are not in a wind-free area, oil trickles in the latter stages are thin and wispy, so keep your drain pan close and shield the floor from any crosswind. You live, you learn. :)

@armandovaldovinos474 2 жыл бұрын

Nice and very helpful video thnk u !!

@jrma906 4 жыл бұрын

Congratulations! Very clear!

@DIYProjectX 4 жыл бұрын

Thank you, sir.

@mariolopez1 Жыл бұрын

One of the best videos here .thanks 👍

@DIYProjectX Жыл бұрын

Wow, thanks so much.

@LIFELOVER2274 8 ай бұрын

Awesome video nice and clear! Most important thing is that put a lot love and pasión of what you do ! Well done! Ty

@DIYProjectX 8 ай бұрын

I'm so happy someone finds my videos useful. Thank you.

@mongstyt9946 2 жыл бұрын

Informative video

@jalalhoulim 3 жыл бұрын

Great video. Subscribed! The only thing missing is links to filter, bolt, and washer.

@DIYProjectX Жыл бұрын

Thanks for the sub!

@arizonasportsclassic9863 3 жыл бұрын

Great video! Thank u

@DIYProjectX Жыл бұрын

Thank you.

@ibrxhimmma8962 3 жыл бұрын

Very good video

@DIYProjectX Жыл бұрын

Thanks a lot.

@61hink 11 ай бұрын

Awesome, awesome video. I was particularly happy that you showed how to reset the service light. Any chance you could go through what the various lights mean? As I cycled through them I was puzzled by most of them. Thanks so much, very helpful.

@DIYProjectX 11 ай бұрын

Thank you. I am super happy it was helpful to you. Good idea with the lights description. I'll think about it.

@WoozieWookie 2 жыл бұрын

Good ass video !!!

@richisteeful 3 жыл бұрын

Great video where did you get the torque wrench from?

@DIYProjectX 3 жыл бұрын

Tank you. My wife got the wrench for me online. Not sure where exactly.

@tobiasdye7007 3 жыл бұрын

Is that an OEM dash display? Mine isn't like that on 2008. If not where did u get it?

@DIYProjectX 3 жыл бұрын

Yes it is. Mine is an FL model, that's why it's a bit different, I presume.

@adrianoet1996 3 жыл бұрын

👏🏻👏🏻👏🏻

@DIYProjectX Жыл бұрын

Thank you.

@squad9387 11 ай бұрын

Do you think you could leave the filter cap hand screwed or would it burst off?

@DIYProjectX 11 ай бұрын

It would probably just leak, if it wasn't tight enough.

@Paul-de8xo 8 күн бұрын

what product do you use to lube the o-rings?

@DIYProjectX 7 күн бұрын

Fresh engine oil.

@masoodturan7489 2 жыл бұрын

I wouldn't advise anyone to put the new oil filter on the ground (or grass as in this video) as it could pickup some loose dirt (e.g. soil, sand, other hard particles) which could then go directly into the engine on install. You don't want any avoidable contaminant debris in your engine. Just a care-point tip.

@DIYProjectX 2 жыл бұрын

Good point.

@murphdog9506 3 жыл бұрын

I hear Walmart's Supertech oil is basically the same as Mobil 1 but performed better when testing and it is cheaper

@nedlerswedlers19 3 жыл бұрын

You get an upvote for the name sir +1 I have also heard this. I use the 14 dollar supertech full syn on my Toyotas and Honda's and I change it at 7k miles no problems ever. The BMWs and Saabs always get Castrol though just a peace of mind thing i guess and they get changed at 5k miles. One of these days I might try a supertech 5w30 in the bmw tho it is half the price literally

@DIYProjectX Жыл бұрын

Check out @ProjectFarm He tests stuff like this.

@pixelart59 2 жыл бұрын

You are a funny man.. using professional mat to lie on. :)

@DIYProjectX 2 жыл бұрын

:) cheers

@pixelart59 2 жыл бұрын

@@DIYProjectX I'm getting same type but a 528xi. I noticed some oil gathered around the transmission pan underneath. Car shifts fine though. I have also seen your DIY on trans fluid change. Do you reckon the oil around the trans pan would be a major issue with the tranny itself or just a fluid change should solve it?

@DIYProjectX 2 жыл бұрын

@@pixelart59 If it´s just a mist around the pan, it shouldn´t be a problem when it comes to fluid level. If it´s actively dripping, that could be worse. In any case, if you do the fluid change, you will have to swap the pan for a new one. That comes wtith integrated filter and the pan gasket. That should fix the leak.