BMW E91 Front Wheel Bearing Replacement. Step by Step Guide

Рет қаралды 13,640

Күн бұрын

BMW E90, E91, E92 Front Wheel Bearing Replacement
Link for Rear Wheel Bearing Replacement: • How to Replace BMW E91...
Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done at your own risk. I will not be held liable for any injury to yourself or others or damage to your firearms or any equipment resulting from attempting anything shown in any videos.

Пікірлер: 33

@evensisftw 9 ай бұрын

Thanks, I must have watched your video 5 times before actually doing the job. Heating up the loctite with a blow torch helps a ton with this. Car is so much quieter since installing. Without concise videos like yours, I would have been lost. Thanks a ton. I bought a FAG wheel bearing kit, which had replacement bolts with loctite 270 on them already.

@carrepairandtoolsvideos 9 ай бұрын

I am glad that video helped you. FAG parts are quality. Its good to change the bolts with the new which is nice you got new one with the part. You are right, without torch heating the bolts can be hard to remove. Appreciate your feedback.

@dancotube Жыл бұрын

Easy to understand and shows effort you have to put in replacing it.

@carrepairandtoolsvideos Жыл бұрын

Thanks and appreciate your feedback.

@diecksl 3 ай бұрын

Hands down the best video on how to do it, with all things that will go wrong

@carrepairandtoolsvideos 3 ай бұрын

Thanks and appreciate your feedback

@suj1945 8 ай бұрын

Nice work bro

@carrepairandtoolsvideos 8 ай бұрын

Thanks bro

@trevorquinton5393 6 ай бұрын

Those bolts behind the strut tower are insane! Rust is just brown threadlock right lololol

@carrepairandtoolsvideos 6 ай бұрын

You are spot on bro :D

@adnanfile Жыл бұрын

nice video thanx . keep up the work

@carrepairandtoolsvideos Жыл бұрын

Thank you

@peterwalton5768 3 ай бұрын

You could have used a heat gun to loosen the locktite. Heat to 50 degrees celsius. Apart from that, great guide.

@carrepairandtoolsvideos 3 ай бұрын

I did not had heat gun at that time. But yeah, heat helps alot. Thanks for sharing your knowledge

@humbertofonseca8563 Жыл бұрын

Excellent video

@carrepairandtoolsvideos Жыл бұрын

Thanks bro!

@sarmadaakash5437 Жыл бұрын

Really Helpful 👍👍

@carrepairandtoolsvideos Жыл бұрын

I am glad it helped 👍

@kkshangla Жыл бұрын

Outstanding

@carrepairandtoolsvideos Жыл бұрын

Thanks buddy

@gplusgplus2286 Жыл бұрын

Very nice video but don't buy the "Ridex" or "Stark" brands from autodoc they are chinesium crap, get good bearings like FAG, SKF, NTN, Timken etc.

@carrepairandtoolsvideos Жыл бұрын

I was on budget so I bought the cheapest I can get. But I thought Stark is good. Next time, I will avoid these chinesium.

@robertwootton2161 Жыл бұрын

Yes heat would soften that threadlock

@carrepairandtoolsvideos Жыл бұрын

I did use torch in another bmw and heat made a big difference.

@teodormihai2244 Жыл бұрын

How many nm did you tightened the bolts ?

@carrepairandtoolsvideos Жыл бұрын

I think it was 120 Nm for wheel bearing bolts. Red thread lock is also recommended for these bolts.

@youngjedi9199 Жыл бұрын

Is the same for x drive models?

@carrepairandtoolsvideos Жыл бұрын

I wouldn't say exactly same but pretty much same principle rather.

@matthewwheeler8215 11 ай бұрын

What is the torque for the bolts?

@carrepairandtoolsvideos 11 ай бұрын

Its 120 Nm/88.50 lb-ft

@matthewwheeler8215 11 ай бұрын

Thanks for the quick reply, great video very helpful 👍

@emanuelwatches1226 Жыл бұрын

do you have instagram?

@carrepairandtoolsvideos Жыл бұрын

Unfortunately no, but i am considering to make one for this channel in future. If you have a question, you can ask here and I will try to answer to best of my knowledge.