BMW External Plastic Trim Permanent Restoration

BMW External Plastic Trim Permanent Restoration - No Paint!

Рет қаралды 7,832

4 жыл бұрын

BMW external plastic trim always fades - but I will show you a method of restoring them back to their original colour for at least FIVE YEARS!
Teak Oil: amzn.to/3foz7l4
Scourer: amzn.to/2L31ZBy
This is another episode in the Lock-Down Series, and this will give you something useful to do that makes your car look so much better. This is a method I have been using for at least 20 years and it has proven to be a great method of getting plastic parts back to their original colour. This plan has worked on the E32, E31, E28 and E38 so far - later models use different plastics (it didn't work on the E64).
But don't take my word for it, have a look at the results!

Пікірлер: 72

@Potato_fel124 4 жыл бұрын

The best advice on KZfaq for these classic bmw's, always a pleasure to watch and learn, thanks Timm.

@TimmsBMWRepairsandInformation 4 жыл бұрын

My pleasure!

@georgimihalkov4781 4 жыл бұрын

Great job, it's very enjoyable to watch you work on that gorgeous car!

@TimmsBMWRepairsandInformation 4 жыл бұрын

Thank you very much!

@m2kev110 4 жыл бұрын

Great tip Timm - I’m amazed the plastic absorbs the oil but great job - thanks 👍😃

@TimmsBMWRepairsandInformation 4 жыл бұрын

Glad to help! Only certain plastics absorb oil - fortunately most of the exterior plastic on the early BMW's do!

@seanmccauley1446 4 жыл бұрын

Looking good Tim! I'll get on my E38 soon with this method.

@TimmsBMWRepairsandInformation 4 жыл бұрын

Good luck!

@davidharris5849 3 жыл бұрын

Need to do this on my '46M, 'had so many BM's; love your channel, and the fact you have a Bowie illustration on your wall(large blow up of low album photo for me) will make me subscribe haha

@TimmsBMWRepairsandInformation 3 жыл бұрын

Thanks David - and yes, a big Bowie fan!

@pastord9407 3 жыл бұрын

You're the man Timm. I would like to see a counter for every time "teak oil" is said during the video. LOL! Great tips for my e39. Thanks!

@TimmsBMWRepairsandInformation 3 жыл бұрын

Great suggestion!

@PilotEd 4 жыл бұрын

love your videos, just bought an e39 540i ;) so helpful to

@TimmsBMWRepairsandInformation 4 жыл бұрын

Great to hear!

@jlcl7665 3 жыл бұрын

I bought a 12V mini polishing and sander machine that comes in handy in these cases. Whatever the case, good video. Greetings from Spanish detailer and a BMW owner.

@TimmsBMWRepairsandInformation 3 жыл бұрын

Thanks from the UK!

@stephanorourke 4 жыл бұрын

Fantastic , ill most likely be using this on all plastic bits on my cars, not just Bimmer

@TimmsBMWRepairsandInformation 4 жыл бұрын

Thanks! Be careful though, it doesn't work on all plastics!

@z4rg3n 4 жыл бұрын

You never cease to amaze Timm, you are truly a wizard. Don't suppose you've any similar tricks for the chrome window trim strips on an E38?

@_Quis_Ut_Deus_ 4 жыл бұрын

I used 0000 Steel woll and autosol polish, did make a positive diffrence. But didnt get off all corrosion haze though but the most of it.😊

@TimmsBMWRepairsandInformation 4 жыл бұрын

Thanks! Once the chrome is damaged it's had it - but Autosol works well: amzn.to/2Lt3cCF

@alexandruc.5128 4 жыл бұрын

Need to do this on my e32 when time allows. Thanks!

@TimmsBMWRepairsandInformation 4 жыл бұрын

You should!

@johnwatson3691 4 жыл бұрын

Ah...just watched the end of this video and you mention exactly the area Im thinking of on the 645ci

@TimmsBMWRepairsandInformation 4 жыл бұрын

Yes, I'll get that one out next week.

@TheKeenMechanic 4 жыл бұрын

Great tip. Thank you

@TimmsBMWRepairsandInformation 4 жыл бұрын

Glad it was helpful!

@johnwatson3691 4 жыл бұрын

Love your videos - big fan - I've had a 645ci convertible from new (2004) and the biggest moan for me is the big area of plastic the rear area of the hood fins sit on and where the rear window pops up from - I'd love to see what you suggest for that - would teak oil do that? Its a slightly softer plastic

@TimmsBMWRepairsandInformation 4 жыл бұрын

I've dome mine with teak oil - I'll leave it a week and then make a decision on whether it does any good!

@subhanmahmood4167 4 жыл бұрын

This is best and good idea thanks for this video

@TimmsBMWRepairsandInformation 4 жыл бұрын

Most welcome 😊

@leonardoalbuquerque7894 2 жыл бұрын

Hey Timm, if you use a sponge it will né even easier to apply. Greetings from Brazil!!

@TimmsBMWRepairsandInformation 2 жыл бұрын

I'll give that a go next time!

@kuttiharislab 3 жыл бұрын

I love you channel 💯😍

@TimmsBMWRepairsandInformation 3 жыл бұрын

Thanks!

@driveandsurvive 4 жыл бұрын

Thanks Tim.Love your work. In light of this being the first time you have applied Teak Oil to the weather strips and door handle surrounds, would you recommend masking off painted areas, to avoid the unwanted application of Teak Oil, or, is it easy to remove the dried product without damaging the clear coat?

@TimmsBMWRepairsandInformation 4 жыл бұрын

You definitely don't want teak oil on the paint - so use some masking tape!

@driveandsurvive 4 жыл бұрын

@@TimmsBMWRepairsandInformation Thanks. I will definitely give it a test (with masking tape on the adjoining paint) and check the result. I think the rubber seal care will also be done as per your seal video. Thanks again.

@designandspecify 4 жыл бұрын

@@TimmsBMWRepairsandInformation I made the mistake of getting it on the paint and can confirm its a pig to get off once allowed to dry. My mistake and nothing elbow grease and sever rounds of T Cut cant resolve. Does do the trick though. Great vids Timm by the way thank you so much, -making E31 ownership in Yorkshire a less lonely experience!

@TimmsBMWRepairsandInformation 4 жыл бұрын

@@designandspecify That's great to hear - I really appreciate your support!

@scottmurray2729 4 жыл бұрын

Another great video 😁👍 Have you tried Aerospace 303

@TimmsBMWRepairsandInformation 4 жыл бұрын

Thanks! Yes I have, excellent for the E-Box and fuse boxes but doesn't last as well as Teak Oil on the external plastic parts!

@scottmurray2729 4 жыл бұрын

@@TimmsBMWRepairsandInformation yes I like it and prefer it to meguiars etc especially on engine bay . Keep up the great work with your videos👍

@pauliew6166 3 жыл бұрын

Would this work on the black body trim (doors, fenders, etc..) on a 99 540i? Always appreciate your vids Timm!!!

@TimmsBMWRepairsandInformation 3 жыл бұрын

Thanks Paulie! Nah, the trim on the E38 doors is a hard plastic and not much soaks into that. I've recently tried a matt-black acrylic hobby paint that does the job.

@rjkulman8990 Жыл бұрын

tks, great info

@TimmsBMWRepairsandInformation Жыл бұрын

Thanks!

@alvintobe5566 4 жыл бұрын

Hi Timm this is Alvin, I have the same problem. I have the 2005 645ci. Could I use Tea oil instead of Gummi? Thanks so much for the video. There aren't many 6 Series videos. Please keep making them. From one of your biggest fans.

@TimmsBMWRepairsandInformation 4 жыл бұрын

Hello Alvin, I've just put teak oil on the rear deck of my E64 - I'll let you know if it lasts - but a day later the rear deck is, at least, all the same colour for a change!

@alvintobe5566 4 жыл бұрын

Hi Timm thanks for the reply. My question is, can I use Tea oil on my rubber seals, Instead of Gummi ph?

@alvintobe5566 4 жыл бұрын

@@TimmsBMWRepairsandInformation Hi Timm I'm still waiting for your reply to my question. Can I use Tea Oil on my rubber around my doors or would Gummi be better?

@brianaust8897 3 жыл бұрын

Timm I’m a little concerned about those heavy scratches after cleaning with the scrubby pad. Am I seeing the result of other scratching? Also, have you ever simply cleaning and applying a ceramic coat? I’ve bought some after seeing a good review but have always used Solution Finish brand treatment lately and it’s pretty great stuff.

@TimmsBMWRepairsandInformation 3 жыл бұрын

I've been a bit reticent about ceramic coating as my finish always looks good without it.

@Leonformatik 3 жыл бұрын

Hi Timm, Maybe the tissue is better even for the front Grill and backplate parts? Im afraid that i need to scratch teak oil from the surface in some years and it looks like the teak oil was maybe to fat on the surface... After rubbing in the teakoil and letting it dry, have you rubbed it with another towel or what is the procedure ? I watched the whole video but I’m not sure if you mentioned it

@TimmsBMWRepairsandInformation 3 жыл бұрын

Yes, I agree, using a lint-free cloth is a much better way to use the oil - you live and learn!

@theeagertravellerbyjunaidi5677 4 жыл бұрын

Now I gotta go online and find me some teak oil! My Gummi Pflege isnt even here yet 😂

@TimmsBMWRepairsandInformation 4 жыл бұрын

The link is in the description.

@GusMahn 3 жыл бұрын

Is that rear window trim rubberized? My Ford belt molding is, and the rubber dries out. I strip the dead rubber off using carburator cleaner sprayed onto a rag. It takes just a little elbow grease, but it looks better for years. Coating it with boiled linseed or teak oil occasionally may keep it looking good forever.

@TimmsBMWRepairsandInformation 3 жыл бұрын

Thanks! Us BMW owners use this stuff: kzfaq.info/get/bejne/kNmehcmZvNLUgWQ.html

@rollotomassi8251 2 жыл бұрын

Thank you my e38 Will soon taste Teak oil ! I tried silicone spray but only last 1 month..

@TimmsBMWRepairsandInformation 2 жыл бұрын

Let us know how you get on!

@rollotomassi8251 2 жыл бұрын

@@TimmsBMWRepairsandInformation Well currently focusing on my brand new AC compressor that does not work. The system is not leaking . Also The PDC is dead. Going to hunt for faulty fuses tomorrow...

@pussygalore5947 4 жыл бұрын

I have to take issue with this method Timm: The steel wool creates scratching in the plastic surface. It will look good for a while and a distance, but plastic, unlike wood, is not porous and cannot absorb the oil so it remains on the surface until it evaporates. Might be better just to spray paint a semi-matte black. Less damage.

@TimmsBMWRepairsandInformation 4 жыл бұрын

Sorry, but I have to disagree! I only show routines that have worked for me for a few years, and Teak oil on plastic is one that has worked for many years. Also, some plastics are absorbent - in fact, plastic waste is used industrially to get rid of oil - it is also used environmentally for the same purpose. Polyolefins, including polypropylene (PP), and polyethylene (PE) are well known to absorb oil. Not all plastics absorb oil, I have certainly come across plastics that teak oil just sits on the top of - but the old plastic on the E31 (and E32) readily absorbs the oil and the effect lasts for years. Go on, give it a go!

@shalershasker1134 4 жыл бұрын

This is the first time I've seen this method used outside of a couple of classic car forums and it has to be said, it does work though it's been a long time since it's been mentioned. PussyGalore, you are right in that it can leave scratches but you avoid that by using minimal pressure and realistically this only really gets used to remove old teak oil if the job has been done before, if it's the first time you're doing it then a normal wash combined with a wipe using a watered down mix of isopropyl alcohol will remove any previous waxes and contaminants allowing the teak oil to do its job. Tim, this also works on the E63/64 windscreen cowl but since it's so big I had to use the bath to clean it when I last did it lol, it can be done in situ but I wanted all the edges clean which as you know means removing the pollen filter cowl and didn't want water etc getting down into the E-box and brake booster housings, used a Q-tip to apply the oil to the large round fastenings. Keep up the good work Hsurf.

@TimmsBMWRepairsandInformation 4 жыл бұрын

Thanks my friend - see you on the Forums!