BMW Hood and Trunk Roundel Emblem Replacement

  Рет қаралды 950,518

Bavarian Autosport

Bavarian Autosport

Күн бұрын

BLOG ARTICLE :blog.bavauto.com/3091
"Like" us on Facebook - / bavarianautosport
"Follow" us on Twitter - / bavauto
"Subscribe" to us on KZfaq - / bavarianauto
Visit our online store - www.bavauto.com/
All of the items shown in these videos are available in our online store at www.bavauto.com/. Need additional tech help? Please visit our tech blog for thousands of Tech and DIY BMW and MINI articles at: blog.bavauto.com/
---
In this DIY and How-To video, we'll show you how to remove and replace the common hood and trunk "roundel" emblems on most BMW models. We'll also show how to change the colors of the blue and/or white sections of the emblems. This can also be applied to the wheel emblems, using the sections included in the color change kits.
TOOLS:
Non-Marring pry Tool Sets;
www.bavauto.com/fland.asp?part...
www.bavauto.com/fland.asp?part...
www.bavauto.com/fland.asp?part...
PARTS:
Hood, Trunk and wheel Emblems and color change kits:
www.bavauto.com/se1.asp?dept_i...
--------
All products noted in this video can be purchased in our online store, www.bavauto.com/, 24 hours a day, 7 days a week. You are also welcome to e-mail us at info@bavauto.com or call into our headquarters and speak to our knowledgeable advisors at (800) 535-2002 (Mon.-Thurs. 8AM to 9PM EST, Fri. 8AM to 7PM EST, and Sat. 9AM to 4PM EST).

Пікірлер: 112
@s4941
@s4941 10 жыл бұрын
Why is the emblem moving around when putting on the stickers?
@GrumpyBearRawr
@GrumpyBearRawr 10 жыл бұрын
Thanks for the advice. I had to ghetto rig a non-marring tool by putting a sock over a small metal baby spoon.
@romanantonyuk414
@romanantonyuk414 10 жыл бұрын
1:38 Be careful not to scratch the paint.. 2:04
@TheCeki1982
@TheCeki1982 10 жыл бұрын
Dear BavarianAuto. The logo on the hood of my X5 is worn by the influence of sunlight and age (9 years old). This video gives me the perfect answer and "how-to". Greetz
@BickBenedict1
@BickBenedict1 12 жыл бұрын
@BavarianAuto E39. Yes I saw that they have two sizes--the ones that fit in the holes on the hood won't fit the trunk holes, which have a shorter diameter. It's all good. I figured it out but appreciate your response.
@djc2k2k
@djc2k2k 12 жыл бұрын
OK, you guys certainly made it look very easy. Perhaps I should've ordered the prying tool from you too. By the way, your customer service was great and I definitely will order more stuff from you.
@bavarianautosport
@bavarianautosport 12 жыл бұрын
@djc2k2k - We did this video on a new hood that had never had an emblem installed. We installed the grommets and then the emblem .... in order to show the removal process. You are correct in noting that the original emblem may require a bit more work to get off (some do actually come off rather easy). Just take your time and be carefull.
@bavarianautosport
@bavarianautosport 11 жыл бұрын
Congratulations! You did it ... and saved money too.
@JustaSassAssGirl
@JustaSassAssGirl 10 жыл бұрын
I just noticed my emblem had peeled this morning. Ordered a new one and watched the video. I can do this!!!! Thank you.
@bavarianautosport
@bavarianautosport 10 жыл бұрын
Excellent! On to the brakes!
@andrewberens448
@andrewberens448 11 жыл бұрын
Much easier to push the old emblem and grommets out from the underside of the hood. Used the back of a set of vice pliers, which worked well. Not sure if all the models have two holes in the underside of the hood, but my 2004 x5 did. BTW, if you look at this video closely it looks like the emblem had already been loosened, and even so, he nicks the paint on both sides while removing the grommets.
@G.H642
@G.H642 11 жыл бұрын
Perfect tutorial thank you!
@Peterstevoli
@Peterstevoli 9 жыл бұрын
Thank you very much.
@bavarianautosport
@bavarianautosport 11 жыл бұрын
Yes, just as shown in the video. In fact, the video was done with an E30 hood.
@CamIbiza
@CamIbiza 12 жыл бұрын
Excellent replacement
@ClevionWin
@ClevionWin 11 жыл бұрын
Ive gotten new emblems both back and front on my E39, and the two pins where there, so I didnt use the ones that followed the packing, I guess nothing is different from the original ones than the ones following?
@bavarianautosport
@bavarianautosport 12 жыл бұрын
The Z3 side grill emblems are adhered. In other words, they use double-sided tape. Pry the old emblem off and clean up the residual adhesive. the new emblem will have fresh adhesive tape already on it.
@817rowel
@817rowel 12 жыл бұрын
can you post a video, how to replace the side emblem for 2001 BMW Z3
@uga71
@uga71 9 жыл бұрын
Wow! this is great!
@bavarianautosport
@bavarianautosport 12 жыл бұрын
The section of video showing the color sticker and the shield install, is done on an emblem that is not fully installed. There are no grommets in place.
@Lenkabound
@Lenkabound 12 жыл бұрын
I love you.
@bavarianautosport
@bavarianautosport 10 жыл бұрын
No, this is a new hood, out of our stock in the warehouse. The satin black paint is just a thin layer that is applied at the factory to prevent rust until the part is properly painted.
@bavarianautosport
@bavarianautosport 12 жыл бұрын
If the grommets are left behind and you can't pull them out, you can just push them all the way through the mounting holes. If the pins are broken off in the grommets, you can push the pins through the grommets.
@wakaflockasdreads
@wakaflockasdreads 11 жыл бұрын
can you remove the trunk emblem in the same way as the one on the hood?
@BickBenedict1
@BickBenedict1 12 жыл бұрын
Are the grommets for the hood and the trunk the same size? Because the ones I bought from you guys don't fit into the holes on my trunk. I thought all the holes were the same size.
@bavarianautosport
@bavarianautosport 11 жыл бұрын
If there is still some of the emblem attached to the tops of the pins, grab the pieces with pliers and twist and pull them out. If it is just the pins, push the all the way through the grommets.
@peteralborano685
@peteralborano685 11 жыл бұрын
on a 2007 328.....the trunk emblem decal just flew off and i recently found it blowing around on my street.....the stainless disc is still intact on trunk.....can i purchase a new black and blue disc..your video shows every situation except mine?lol or do i have to purchase a whole new emblem?
@bavarianautosport
@bavarianautosport 11 жыл бұрын
We typically install new grommets so that they are nice and tight in securing the pins on the emblem. The old grommets may be usable, but may not be real tight.
@bavarianautosport
@bavarianautosport 11 жыл бұрын
Yes, you do need to replace the complete emblem.
@nycdave100
@nycdave100 11 жыл бұрын
The after-market roundel I bought on ebay won't push entirely in so that is completely flush with the hood. It rocks slightly at the 12 and 6 o'clock positions. The grommets I got from the dealer. Do you know what the problem might be?
@bavarianautosport
@bavarianautosport 12 жыл бұрын
We're not sure what you are asking, here. Are you talking about the blue protective film that we show at the 0:44 time mark? If so, this Just comes on some of the new emblems and it is intended to be removed.
@bavarianautosport
@bavarianautosport 12 жыл бұрын
Yes, you can
@bavarianautosport
@bavarianautosport 11 жыл бұрын
If the pins are broken off and still in the grommets, just use a punch or small phillips-head screwdriver to push them all the way through the grommets. Tap the tool gently with a hammer if needed.
@dr.edgar.urilov
@dr.edgar.urilov 10 жыл бұрын
thanks from my father!
@MegaAndroidboy
@MegaAndroidboy 12 жыл бұрын
Yes.is that mine i removed the emblem from the car and i had one of those and i dont know how to put it
@XDarkR3aperX
@XDarkR3aperX 11 жыл бұрын
The e30 badges are with pins , right :) ?
@dvaifilmsdotcom
@dvaifilmsdotcom 11 жыл бұрын
are those grommets useless after removing original roundel? is that why you have new ones? or are you using the new ones because it came with the roundel?
@Gerardgrx
@Gerardgrx 11 жыл бұрын
Mine broke and it has the two pins stuck
@bavarianautosport
@bavarianautosport 11 жыл бұрын
There is a possibility for you to damage the hood. This is why you do need to be careful. Protect the working area with a rag,or you could also apply a couple layers of painter's tape around the working area ... just in case you slip wit the tool.
@saniya976
@saniya976 11 жыл бұрын
both the pins broke off into the grommets and i could not remove it. i doint understand what you mean. just push the new emblem into it still?
@muslim610
@muslim610 10 жыл бұрын
Thanks,good video,well done.
@bavarianautosport
@bavarianautosport 13 жыл бұрын
@TheLarryBrown The emblems are not sealed. However, they are sometimes difficult to get started. In this case, we typically apply a few layers of tape around the emblem, on the paint, at the 3 and 9-o'clock positions. Then use a sharp small screwrirver to CAREFULLY Jab into the edge of the emblem and pry it up enough to get our tool under the edge. DO NOT pry one side too high, gouging the paint on the other side. We have also heard of sliding a fishing line under the emblem to lift it.
@xXGAMING101Xx
@xXGAMING101Xx 10 жыл бұрын
what size is it?
@bavarianautosport
@bavarianautosport 11 жыл бұрын
We only sell BMW original hood emblems. These are not aftermarket. Yes, they do have issues even with these original BMW units. They do have a warranty. Just let us know.
@1948russ
@1948russ 9 жыл бұрын
hi, great video, I have a 1996 bmw 328i, is the process the same for trunk emblem, is it also the same emblem for both front and back? Thanks in advance
@bavarianautosport
@bavarianautosport 9 жыл бұрын
The rear emblem in replaced in the same manner as the front. The rear emblem on the E36 3-series (your 96 328i) is the same as the front emblem.
@Lenkabound
@Lenkabound 12 жыл бұрын
Is there any other way to pry it off without buying some kind of tool kit?
@DP2LA
@DP2LA 11 жыл бұрын
would it dammage the hood? that is my #1 priority
@bavarianautosport
@bavarianautosport 12 жыл бұрын
We recommend new grommets, as the old ones may not secure the new emblem properly.
@garypalmer690
@garypalmer690 12 жыл бұрын
can i simply remove my current emblems and paint them orange then reinstall them with the original pieces??
@koolkid368
@koolkid368 9 жыл бұрын
Does the rear emblem come off the same way. Having a bit of trouble on my e30 badge
@bavarianautosport
@bavarianautosport 9 жыл бұрын
Yes, the rear on the E30 3-series installs (and is removed) in the same manner as the front emblem.
@djc2k2k
@djc2k2k 12 жыл бұрын
Nice video but it's not that easy. The old emblem had already been removed before so it seemed very effortless. I finally was able to remove it by inserting a credit card to loosen it and then inserting a small screw driver in between to pry it off.
@seanx.c7453
@seanx.c7453 10 жыл бұрын
Does it work for e92?
@bavarianautosport
@bavarianautosport 12 жыл бұрын
Most trunk emblems are removed and replaced in the same manner as the hood emblem. If you have specific questions on your BMW model, just call our agents at 800-535-2002.
@bavarianautosport
@bavarianautosport 11 жыл бұрын
You can't access the underside of the pins on all models.
@bavarianautosport
@bavarianautosport 11 жыл бұрын
In most cases, yes.
@bavarianautosport
@bavarianautosport 12 жыл бұрын
You can follow the same procedures using a screwdriver or similar tool. Just be very careful of the paint.
@MegaAndroidboy
@MegaAndroidboy 12 жыл бұрын
At 0:44 , how do i put that on the emblem at 0:15 ?
@psilicybin666
@psilicybin666 10 жыл бұрын
Is that a satin paint job?
@WorldEngineersOnline
@WorldEngineersOnline 9 жыл бұрын
How about the emblem for the wheel covers?
@bavarianautosport
@bavarianautosport 9 жыл бұрын
The wheel emblems are glued on to the hub cover part. They just "peel' off.
@Akourmadas
@Akourmadas 11 жыл бұрын
My 2008 328 doesnt have the grommets... Just a very sticky adhesive material.
@jusa173
@jusa173 9 жыл бұрын
Why does it look so loose when attaching the stickers?
@bavarianautosport
@bavarianautosport 9 жыл бұрын
This is a new hood, out of the warehouse. We just have the emblem sitting in place, not fully installed with grommets, for the sticker install.
@dvaifilmsdotcom
@dvaifilmsdotcom 11 жыл бұрын
thanks i suppose thats good to know.
@buggybuilder99
@buggybuilder99 10 жыл бұрын
E30 bonnet?
@lilmemo13494
@lilmemo13494 10 жыл бұрын
I have a 97 bmw 318 i and I need to change the rear badge. How do I do that?
@bavarianautosport
@bavarianautosport 10 жыл бұрын
Same as shown in the video.
@bavarianautosport
@bavarianautosport 12 жыл бұрын
Wow .... Well, at least you can do it next time!
@moniquehines7138
@moniquehines7138 9 жыл бұрын
Would this work on a 2007 530i hood?
@bavarianautosport
@bavarianautosport 9 жыл бұрын
Sure does.
@Nicky14P
@Nicky14P 9 жыл бұрын
I have a 2001 bmw 330i. Would this be the same installation or no?
@bavarianautosport
@bavarianautosport 9 жыл бұрын
Yes, the same.
@boycotts
@boycotts 10 жыл бұрын
do all BMW models share the 82mm Bonet and boot badges.. or for you americans Hood and Trunk...... i have a BMW 535i looking to put black badges on
@bavarianautosport
@bavarianautosport 10 жыл бұрын
While there is a lot of interchangeability in the emblems, there are some differences between some of the models (especially trunk badges). What year 535i do you have? Our color change sticker kits do have all of the emblem sizes on one sheet.
@bucki58
@bucki58 12 жыл бұрын
The BMW dealer in LA charged me $150 for parts and labor to replace my hood roundel on my 2011 M5! Service guy said it was a complicated procedure!
@bavarianautosport
@bavarianautosport 12 жыл бұрын
There are different sized grommets for some of the applications. What model do you have? You can also feel free to contact our Customer Service agents at 800-535-2002 and they can help you out as well.
@Pete19591
@Pete19591 9 жыл бұрын
How do you change a trunk roundel emblem on a BMW X5 please? The emblem component is different to a BMW sedan.
@bavarianautosport
@bavarianautosport 9 жыл бұрын
What year x5?
@Pete19591
@Pete19591 9 жыл бұрын
BavarianAuto 2007 E70
@bavarianautosport
@bavarianautosport 9 жыл бұрын
Pete19591 The hood emblem for the E70 X5 is installed the same as shown in the video.
@bavarianautosport
@bavarianautosport 11 жыл бұрын
The new grommets are the same as the originals. We usually like to have new one on-hand, in case the originals are no longer tight enough to properly secure the new emblem.
@JonSmoley
@JonSmoley 9 жыл бұрын
Can you guys do custom stickers? As in, stickers that aren't solid colors? I would *love* to do a maryland flag roundel
@bavarianautosport
@bavarianautosport 9 жыл бұрын
Unfortunately, no. You should be able to have a sticker company do it though.
@JonSmoley
@JonSmoley 9 жыл бұрын
ah well. Is it possible I could get some specific specs as to the exact size of these stickers so I can make them?
@bavarianautosport
@bavarianautosport 9 жыл бұрын
Jon Smoley Jon, we purchase the sets from the originator. We would not be able to pass the proprietary info (we don't have it anyway). You could purchase a set ......
@DjStiv3
@DjStiv3 10 жыл бұрын
So exact same principles for the trunk one? Damn i feel the trunk will be a bit harder as your doing it vertically
@bavarianautosport
@bavarianautosport 10 жыл бұрын
Most trunk emblems are replaced the same way as the front. Some are different though. What model do you have?
@DjStiv3
@DjStiv3 10 жыл бұрын
BavarianAuto 325xi 2004 bottom left white is almost all off and i want to replace it
@azthundercloud
@azthundercloud 11 жыл бұрын
wouldnt you know it. my emblem just did this. didnt help much that i was doing mach2 either.
@bavarianautosport
@bavarianautosport 10 жыл бұрын
buggybuilder99 - Yes, E30
@bavarianautosport
@bavarianautosport 11 жыл бұрын
Well ... either wrong grommets or the emblem is manufactured incorrectly. We only offer genuine BMW roundel emblems, by the way.
@bavarianautosport
@bavarianautosport 12 жыл бұрын
@IIIRobbieIII41 - Just go to our web site (bavauto dot com) and we will show the correct emblem for your 2000 323ci. Don't worry about the size, we already know which one is correct and will only show the one for your car.
@TheLarryBrown
@TheLarryBrown 13 жыл бұрын
It's not that easy. The non-mar pry tool is a great idea, don't try to use a screwdriver. But the emblem in this video is pre-loosened, making it look like it's easy to get the tool under the emblem. In reality the emblem fits tightly against the hood and forms a watertight seal, it's very difficult to get anything underneath there. Go buy a non-mar pry tool, but otherwise ignore this video and keep searching for a method.
@lagnaf007
@lagnaf007 9 жыл бұрын
Question: Where did you purchase the emblem? I just purchased one and it's a very cheap excuse for an emblem.
@bavarianautosport
@bavarianautosport 9 жыл бұрын
Ben - Bavarian Autosport only caries original BMW emblems. There are indeed cheaper emblems available .... that are aftermarket cheap copies (are are illegal as well). The original BMW emblems are available here: www.bavauto.com/se1.asp?dept_id=136
@Azersgaming
@Azersgaming 12 жыл бұрын
that new emblem doesnt look secure at all, seems like it could fly off while driving..
@Troymatti
@Troymatti 10 жыл бұрын
Cool , change the old one and put on a new one that's keep moving .LOL
@bavarianautosport
@bavarianautosport 10 жыл бұрын
That is a new original BMW hood and a new original BMW emblem. We're working on a bench. When installing the clear cover, there are no grommets securing the emblem to the hood. That's why it's moving.
@Troymatti
@Troymatti 10 жыл бұрын
Oh ok , sorry for that , I didn't mean to make fun of Your vedio .
@dreckigerdan296
@dreckigerdan296 10 жыл бұрын
Do I have to take new grommets ?
@bavarianautosport
@bavarianautosport 10 жыл бұрын
While not 100% required, we do typically install new grommets so that the emblem will be nice and tight, once installed.
@dreckigerdan296
@dreckigerdan296 10 жыл бұрын
BavarianAuto i think i wont but i will put some sticky tape on it xD
@XDarkR3aperX
@XDarkR3aperX 11 жыл бұрын
;D
@bavarianautosport
@bavarianautosport 11 жыл бұрын
Mitch, We have the grommets in-stock. just go to our online store at bavauto,com or call our Advisors at 800-535-2002.
@bavarianautosport
@bavarianautosport 12 жыл бұрын
We have the correct emblems for your 330ci convertible. Just call us at 800-535-2002 or go to our web site BAVAUTO dot COM
@bavarianautosport
@bavarianautosport 12 жыл бұрын
IIIRobbieIII41 - If you accidentally got an incorrect emblem from us, just give us a call at 800-535-2002 and we'll fix you up. If your emblem came from somewhere else, they should take care of you in the same manner.
@bavarianautosport
@bavarianautosport 12 жыл бұрын
We're sorry, but we're unsure exactly what you mean. You can feel free to call us at 800-535-2002 for further assistance.
@ChrisDodges123
@ChrisDodges123 11 жыл бұрын
U lost me at the peeling off of the blue tint...just Kidding
BMW Hood Roundel Badge Removal and Installation DIY E46 E90 E92
2:26
DIY BMW Hood Emblem Replacement. EASY!
7:22
Jamie's Garage
Рет қаралды 191 М.
КАРМАНЧИК 2 СЕЗОН 7 СЕРИЯ ФИНАЛ
21:37
Inter Production
Рет қаралды 448 М.
1 or 2?🐄
00:12
Kan Andrey
Рет қаралды 30 МЛН
DIY: BMW E39 Electronic Trunk Switch Repair
3:51
4DIYers
Рет қаралды 58 М.
Repairing curbed:scraped alloy wheels on BMWs and MINIs
12:37
Bavarian Autosport
Рет қаралды 467 М.
HOW TO REPLACE HOOD EMBLEM ON BMW
4:27
Auto Repair Guys
Рет қаралды 4,7 М.
BMW Emblem Motorhaube wechseln | DIY Tutorial
1:46
Auto Reparatur Tutorial
Рет қаралды 187 М.
BMW key fob program DIY
5:14
Evan Goyuk
Рет қаралды 1 МЛН
BMW Roundel/Emblem Replacement
2:53
Samuel Vella
Рет қаралды 26 М.
Repairing Paint Chips On A BMW Or MINI
16:52
Bavarian Autosport
Рет қаралды 445 М.
How to Find The Correct BMW Bonnet or Boot Badge
5:50
Nigel Marston Motorsport
Рет қаралды 99 М.
How to Replace a Broken or Missing BMW Bonnet Boot Hood Trunk Badge
3:10
Nigel Marston Motorsport
Рет қаралды 28 М.
A estos dos los dejaba sin carnet - Dashcams España
0:31
Dashcams España
Рет қаралды 14 МЛН
Дальнобойщик натворил делов...#дуракинадороге #shorts
0:30
Front Tractor Tire Project #project
0:51
SB Skill
Рет қаралды 21 МЛН