Hi Gauge is for checking if bearing journals are oversize as the gauge is tapered if it goes to flange it is worn oversize they were supplied by vandervel bearing

Best engineering channel. Please keep the great videos coming

The Hepolite machine would be nice cleaned up, if you refurb it totally it may not be quite so cool and original.

If those dowels on the block face are hollow if you fill them and the gap underneath with grease you might be able to tap them out hydraulically. It certainly worked for me in getting a B series spigot bearing out. Just put the crank on end, filled the bushing with grease and tapped a snug fitting drift into it. Apologies if this is old info.

Nice work on the BMW block, I was surprised with how much meat was still there after taking it out to size, great video again, love the vintage tooling, I’d clean it up and see how it looks then make a decision as you mentioned it was flaking, either way it would look cool, be nice for everyone to see it as long as it doesn’t get messed with eh

With the old Hepolite gauge I'd certainly start with a good clean to see how much grime is embedded. If it won't tidy up, then consider a careful recoat. I'm sure there's some trick machine finish you could apply to the measuring surface to really make it sing. I'd put it in one of yr glass cabinets in the shop - you'll get visitors asking you to demo it. As for that Vandervell gauge - well I can only guess. They made bearings, so I reckon with those Ford markings it would have been used to gauge main or big end bearing dimensions of particular engines - whether they needed oversize bearings or machineing. Am I even close?!

awesome video. e30 owners thank you

I would put the Hepolite machine in the board room/office. You seem quite attached to it and if its on the counter chances are it will get broken. I would restore it and you can watch it patina in your ownership and pass it on......just a thought. 👌🏻

Tough decision with the Hepolite machine, I’d probably opt for restoring it but would look great either way. If you opt for cleaning it all up we have a vapour blaster if you ever need anything cleaning up 👍

You could give the Hepolite piston measurer to me to go with my Hepolite pistons in my 1960 Rover P4, 6 Cylinder, I.O.E 2625cc. Massive 104 BHP ! which I've owned for the last 49 years ! I hope you can still get the Hepolite Pistons, otherwise I'm stuffed ! Other than that Leave the Patina ! Just clean and polish it, with a soft cloth ! Take care James ! Just found your site and have been Binge watching it !

Great video , very much appreciated ,,,,,

Would be nice restored and put on Display on the counter for everybody to see

Ah the struggle of how much to restore something. I agree with you, but there is no point restoring something to brand new in my book. Yes the mechanics can and should be, but the look has to be retained. Well that is my view. Where to put it depends on how precious it is to you.

Subi performance taps a thread in them and slides them off.

when installing the snaprings for the pistons, arent you supposed to use the indent on the piston to leverage a pick or small flat head like tool to pop the ring in? I always thought this was that indents purpose

Hi I want to ask regards rebore bmw m54 block from 84mm to 85mm do you torque the deck or not need it?

IM wondering that there is enough meat t bore to 85mm, I woud duble check how much thickness is left of the cylinder walls. There is a possibility that the cylinders will bend and become a wider shape, thats why I didnt try to bore the 80mm block to 84mm. But you did 85mm!

hellow my friend, venezuela

What's the company's name that supplied the pistons?

How many is the new stroke?

Just get it working and leave it as is put in shop for people to see

Supereta