BMW N54 YOU CAN LOG OIL PRESSURE IN MHD! NXM THANKYOU!

Рет қаралды 10,077

Жыл бұрын

BMW N54 YOU CAN LOG OIL PRESSURE IN MHD! NXM THANKYOU!
LINK TO THE SENSOR KIT HERE - nexsysmotorsport.com/n54-oil-...
If you would like to help support what we do i have started a buymeacoffee page. Love you all! www.buymeacoffee.com/zeroto60...
Become a member and get exclusive discounts at www.ZeroTo60.com plus other unique perks and benefits:
/ @zeroto60tube
In Australia? Visit the Zero To 60 Shop! www.zeroto60.com
Follow our socials for BTS stuff and more car content
On Instagram: / zeroto60tube
On Facebook: / zeroto60tube
Business Enquiries: zeroto60tube@gmail.com
---------------------------------------------------------
0-60 and 100-200 Dragy timer: amzn.to/2IKMQr0
---------------------------------------------------------
Our Must Have Tools:
Car Trim removal set: amzn.to/3oQhsHe
Under bonnet led light: amzn.to/3aaDJLt
Electric Rattle Gun: amzn.to/380Eh41
3/8" Drive torque wrench: amzn.to/34aGzwy
1/2" Drive torque wrench: amzn.to/37gGUPZ
---------------------------------------------------------
Our Must Have Car Care:
Hybrid ceramic: amzn.to/2KlkMuP
Tyre shine: amzn.to/2WcRzox
XL microfiber dry towels: amzn.to/2IShFdC
Wash mitt: amzn.to/3oQM7UA
---------------------------------------------------------
Our Camera Gear:
Ultimate camera/gear bag: amzn.to/2Kj1N46
Action/vlogging camera: amzn.to/37eWawM
Non-vibrate suction mount: amzn.to/3a9vmjy
Wireless mics for in-car audio: amzn.to/3a8C1dH
---------------------------------------------------------
When we're not working on cars, we're watching the Grand Tour!
amzn.to/3qXghY4

Пікірлер: 144

@stvnjmz Жыл бұрын

awesome, another product i'll be adding to my N54. It's great to see these motors are still getting upgrades!

@ZeroTo60Tube Жыл бұрын

It really is great to see. And its becuase of passionate people like Austin. There is so much more money to be made on the B58 and S58 plateform right now, but he is still putting time in to our N54s. Can't thank him enough

@BMW1M Жыл бұрын

ikr! I am happy to support any vendor that is still providing quality R&D on the platform.

@ericvermeulen9853 Жыл бұрын

Thanks Andrew, my Hart dropped when you said “ i miss my cars so much “ hope you getting them back soon , and your JMC single turbo car 😍😍😍😍 we need so much more of that car

@sonicnofadz Жыл бұрын

so awesome. Love how it just pins into the factory connector

@heathbailey4149 Жыл бұрын

I had a discussion with Austin when he start the B58 kits and the quality of his work is perfect. I run it and believe in all his work and effort on his products. Great work Andrew keep it up mate

@ZeroTo60Tube Жыл бұрын

I have been chatting with Austin for a while now. Proper car dude and hes not doing it for the money. He really wants to keep N54s alive and make sense as a tuner platform. The next stuff he has coming is next level. Just wish i could talk about it.

@heathbailey4149 Жыл бұрын

@@ZeroTo60Tube it must be very exciting. I like his passion for the E9X chassis and the support for still developing it Now most people are turning to Development on the B58 more and more.

@Dynsam_ Жыл бұрын

@@ZeroTo60Tube Any idea when new stuff would be released?

@milehighboost5521 Жыл бұрын

@@ZeroTo60Tube love this and good to know Austin is looking out for the n54 community. Perfect timing as my wife has been asking me what i want for xmas and I've really not had any good ideas until now. Good to see you uploading videos again, Andrew. Keep up the great work! Criminal that you dont have way more subscribers but it will come in time. I'm sure of it.

@DJ-pz4ur Жыл бұрын

This is such a brilliant solution! I already have P3 Gauge specifically for monitoring oil pressure, but I absolutely had to also get this NXM kit, purely because it will immediately drag your attention to any potential oil pressure issues and it will do it in an OEM way! The P3 gauge doesn’t quite do it that well, but that’s not a dig at them - I’ll be able to re-purpose the P3 Gauge for one of its many other features!

@hevendranarayansamy2793 Жыл бұрын

Great video once again. I've been looking for an n54 and I'm learning so much from this channel.

@ZeroTo60Tube Жыл бұрын

Glad to help. There is probabaly a video on here to cover anything you could ever want to do with a N54. And ill say it now, spec for spec we build the fastest ones on youtube

@BassFraud Жыл бұрын

This is just awesome! Basically plug and play and no need to cut wires 😂

@ZeroTo60Tube Жыл бұрын

Plug the wires in the to plug, then plug that plug in and you are good to go

@kar4tube Жыл бұрын

Hey Andrew! Awesome to see you again! And daaaamn that's one gorgeous 1M!!!! Well, I didn't even have to give it a second thought. This is the cleanest oil pressure sensor solution ever. Already snapped one up from Nexsys. 😎 Thank you for keeping us well informed as always! Btw, in case I missed anything; what's the status on the oil dipstick availability? Please keep us posted. Hope things are working out for ya!

@ZeroTo60Tube Жыл бұрын

Dipsticks are on the back burner. The oil temp we see when we remove the factory sensor is an estimate, not true oil temp. So its got us concerned, we dont want to loose oil temp guage accuracy

@Nico_335i_DCT Жыл бұрын

Awesome tool! I had guessed 45psi at idle. Thanks for sharing Have a great week guys, Dutch regards Nico.

@ZeroTo60Tube Жыл бұрын

Thanks for checking the video out man!

@marcwonnacott3286 Жыл бұрын

Just ordered myself one. Really good solution. Thanks for the vid Andrew.

@ZeroTo60Tube Жыл бұрын

No worries man! Thanks for supporting Austin, he is a really good dude

@AndrewNichols Жыл бұрын

This is really good value on cars with MHD.

@TIPh0enix Жыл бұрын

This is HUGE!

@bimmertec Жыл бұрын

Amazing 👏 sounds great bro God bless always 🙏

@loekfelten548 Жыл бұрын

That car looks awesome !

@cocko1135 Жыл бұрын

Jesus that is cheap for good insurance! Wow, good work Austin. Good vid man

@kkarnis3791 Жыл бұрын

Thanks for bringing this to light. Really good bit of preventative maintenance. Where's your cars at?

@ZeroTo60Tube Жыл бұрын

I will tell the story one day.

@marklinton9315 Жыл бұрын

Admire ur car dedication. One love. Jamaica

@ZeroTo60Tube Жыл бұрын

Thanks man! You can't just stop being a car guy.

@bimmertec Жыл бұрын

Great job 👏 👍

@ZeroTo60Tube Жыл бұрын

thanks man

@odie0815 Жыл бұрын

Awesome Kit - also the warnings are extremly nice to have 👍👍 Fun (or rather disturbing) fact - my N53 has an oiplreassure sensor from factory - but won't let you display 😖

@ZeroTo60Tube Жыл бұрын

Interesting and fun! We have a n53 in the workshop right now. I am going to go and check it out.

@friguy4444 Жыл бұрын

Very cool! I'll be looking into it. As well looking forward to more. I guessed 45psi. lol.

@ZeroTo60Tube Жыл бұрын

Man pretty spot on by the engine is at full running temp

@BMW1M Жыл бұрын

Good guess! But why look into it? imo it's a no brainer

@cliffgardner5717 Жыл бұрын

Picked one of them up when they had the sale til the new year. Haven't hooked it up yet. But it will replace my gauge I have. Be much cleaner then just a random gauge in the car.

@ZeroTo60Tube Жыл бұрын

And with the automated warnings as well.

@cliffgardner5717 Жыл бұрын

@@ZeroTo60Tube my gauge now has alarms if falls under 20... but yes definitely the warnings on dash will be better! Going be setting up the limp mode etc if lose oil pressures also. Make to much power and have to much money in the car now to risk stuff...

@in54ne82 Жыл бұрын

I wonder what the oil pressure numbers are on the yellow warning and red warning. Going to the track next month and test this feature.

@17t135i Жыл бұрын

Love the 1M

@ZeroTo60Tube Жыл бұрын

It’s a very well lived car.

@BMW1M Жыл бұрын

🙏🏼 I spoke to the 1M. It says it loves you too.

@KurumaDesigns Жыл бұрын

This is amazing! Definetly something the n54 platform has been longing after 👌🏻 Also that 1M sounds really good! What’s the exhaust setup on it?

@ZeroTo60Tube Жыл бұрын

Man its mega.... i am going to shot for this, but i can't remember what mid pipe it has. But its VRSF downpips, some european mid section, then stock 1m rear mufflers.

@BMW1M Жыл бұрын

VRSF downpipes and a Berk midpipe, and stock axle-back.

@biz1M Жыл бұрын

What inlets does car have? Once lost a 10mm socket under that DME box before. Fun times.

@maxgr7723 Жыл бұрын

Hi Andrew a really nice video even if not really relevant to my cars, the feature sounds interesting. My 2 cents this is no amateur suited feature at all. Seeing your oilpressure is good, seeing if it probably drops to zero so you can shut off the engine in time...(maybe a interesting feature for a security mod at least in non oem ecus) amazing. BUT mercedes once had those in cars in the 70s and 80s and then in around 1990/91 they dropped it because a lot of costumers couldnt understand that oilpressure is highly temperature, RPM and oiltype depending. Just saying people should install this if they know what they can get from this!

@maxgr7723 Жыл бұрын

Have to say most things were answered (i wrote when the video was in first 2 minutes) and the powercut is a nice thing even if I'd prefer shutoff

@BahNDesire Жыл бұрын

@@maxgr7723 Hey Max, you can actually configure it to shutoff if you have a custom tune. We didn't want to do that for the default options when using the MHD checkbox though. The limiting is done via RPM limit so you could set the limit to say 0 RPM and the engine will turn off. This can be dangerous though depending on the situation and I would only recommend it on a track as you'll lose all power and power steering.

@maxgr7723 Жыл бұрын

@@BahNDesire oh thats interesting and you are right about the complete powershutoff being a potentially dangerous option. I just thought the only thing that really would save the engine though in case of far to low oilpressure or fast oilpressure drop might be a shutoff instead of still giving it power to run...still it is a good feature that will probably be really cheap compared to a fatal engine failure!

@Hyngyynj Жыл бұрын

Man that car is beautiful

@ZeroTo60Tube Жыл бұрын

It really is, so much love has gone in to it by the owner

@BMW1M Жыл бұрын

Thanks!

@bashtcrab81 Жыл бұрын

Love the channel, ❤ does anyone make a n54 top mount single turbo manifold or kit in Australia?

@ZeroTo60Tube Жыл бұрын

I can connect you with two different versions. What sort of budget are you aiming for? $10-$15k

@bashtcrab81 Жыл бұрын

What’s the differences between the two packages?

@TML34 Жыл бұрын

Wow, the N54 has massive oil pressure! No wonder my valve cover is leaking. 😂

@ZeroTo60Tube Жыл бұрын

Valve cover, turbo seals, OFHG............ it all makes sense now

@cocko1135 Жыл бұрын

JB gets all the cool stuff 😅

@BMW1M Жыл бұрын

He’s a bastard! I mean, lucky bastard

@ZeroTo60Tube Жыл бұрын

haha, he really does. But hey he appreciates it and probabaly washes that car 5 times more than we wash ours

@cocko1135 Жыл бұрын

@@ZeroTo60Tube JB always presents the 1M well, that is without doubt. What a man

@maxgr7723 Жыл бұрын

More like not so worthy note...the orange valvecover looks amazing...could even imagine that for my e46 330ci because of the orange interior...

@BMW1M Жыл бұрын

Video doesn't really show the color correctly - it's actually Valencia Orange, which is the signature color for the 1M - IRL it's not as bright as it appears on video. Contact IND Distribution if you're interested in one.

@BMW1M Жыл бұрын

I just noticed it's now been 6 months since this channel had any content that wasn't about the 8HP trans :(

@ZeroTo60Tube Жыл бұрын

Sucks balls what’s happened in the last 12 months.

@kencooper8636 Жыл бұрын

Great product Andrew. I have ordered one. Does having the oil switch disconnected bring up any codes or lights? Would it be possible to install a 'T' piece and run both oil pressure switch and sensor?

@BahNDesire Жыл бұрын

No codes for the switch after flashing.

@ZeroTo60Tube Жыл бұрын

I wondered where you have been Ken. If you are ever up near Brendale feel free to stop in and say high

@kencooper8636 Жыл бұрын

@@ZeroTo60Tube I will drop in tomorrow and catch up with you.

@seanpaul3050 Жыл бұрын

What’s the oil pressure difference at idle between cold start and full working oil temperature ?

@BMW1M Жыл бұрын

Cold start idle is right around 100psi immediately, and scales down to about 45psi once warm. Normal pressures while driving are 60-110psi. Assuming my car is normal, which I suspect it is 😅

@Tewty11 Жыл бұрын

Whats the intake kit? I see a k&n filter but i didnt think they made one for a n54, and definatly not in carbon!

@BMW1M Жыл бұрын

It's an Armaspeed intake with a K&N filter upgrade

@bimmertec Жыл бұрын

1m people crazy 🤪

@ZeroTo60Tube Жыл бұрын

you are not wrong! This thing is blinged up

@Caswell404 Жыл бұрын

Looks like a #35i oil pressure sensor. I'd like to know the voltage vs. pressure values of the sensor. Again is it safe to use the same sensor to monitor fuel pressure?

@ZeroTo60Tube Жыл бұрын

i really wouldnt know with the OEM sensors

@illwil1005 Жыл бұрын

If you plan on tuning reflex +… can it read oil pressure that way? Or do I need this new set up added on?

@ZeroTo60Tube Жыл бұрын

You will this setup for it to work with in the DME. You record oil pressure on the reflex and display it in MHD through can. However for it to limit RPM and throw error codes you need the work of Nexus.

@illwil1005 Жыл бұрын

@@ZeroTo60Tube just put one on order. $169 2022 sale then the price goes up to 200. Happy New years from the states!

@BassFraud Жыл бұрын

What if I buy the MHD super license ? Does the super license not include this oil pressure license ?

@ZeroTo60Tube Жыл бұрын

Nope, its not part of MHD tuning side. Just MHD is the cheapest way to get the custom modified bin file in the DME.

@jacobbub506 Жыл бұрын

My first thought was 60 psi...but I was like no...that's crazy...then I thought it would be 45psi. That's insane though...hitting 120 on Rev! No wonder they always have oil leaks! 🤣

@ZeroTo60Tube Жыл бұрын

Yeah, its wild hey. The high oil pressure is also probabaly one of the reasons these motors will make so much power in stock form.

@kar4tube Жыл бұрын

Nailed it! LMFAO! 🤣

@DavidN5X Жыл бұрын

Tell me, will the oil indicator constantly burn on the screen or can it be somehow removed when you turn on the non-factory sensor?

@ZeroTo60Tube Жыл бұрын

This package completely changes how the dme sees oil pressure and how it communicates it with the car. It’s pretty clever.

@lexgoh5259 Жыл бұрын

Hi can i ask what intake is that?

@BMW1M Жыл бұрын

That is an Armaspeed carbon intake, with a K&N filter UG

@swagfest2k144 Жыл бұрын

Is the price going up or down on this if its going down and isnt supported in mhd yet then I would wait for this. But if its less now than it will be in the future I will hop on the band wagon instantly. Also I guessed 50 psi at idle but i ddnt expect over 100 when revved.

@BMW1M Жыл бұрын

This is an introductory price - it will go up.

@ZeroTo60Tube Жыл бұрын

Prices never go down...... well not on products people want anyway. As mentioned on the site they are at an introducty price at the moment. And man its crazy the pressure they make.

@scarface16134 Жыл бұрын

The price is going to go up mhd will release a update I think tomorrow

@autoSRI Жыл бұрын

So is mhd offering this as a standard tick box for everyone in an update or will you always need the licence code and custom tune file

@autoSRI Жыл бұрын

Or Would it be possible to just purchase the licence code and use it on OTS maps as by the time I’ve imported the physical sensor/loom and payed shipping duty and various taxes it end up being silly money

@ZeroTo60Tube Жыл бұрын

Once you have the kit from NXM you will be able to modify any DME tune. So OTS, custom map etc

@kenvanbuskirk7034 Жыл бұрын

USE GREAT CARE installing the new oil pressure sensor !!!! The old oil pressure switch is made of steel and is pretty tough. The new sensor is made of brass and will snap if you exceed the 7nm torque recommendation { 5.1 ft lbs which is barely above finger tight) I did so. I had to buy and wait for a new sensor to be delivered. BMW dealer price is almost $100 US. Short of the torque recommendation in the instructions there is NO warning on how careful you need and should be with this part. Should have used a different pressure switch? Yes...... bottom line be very careful with the installation of this sensor it will save you wasting money on a new sensor and having to reinstall your old switch until the new sensor arrives!!!!!!!!!⚠

@samdicker Жыл бұрын

After all your testing, what turbos would you recommend? I am in australia also and trying to max the AT around 600whp with port injection. But just stuck on turbo choice. Do I go the new VIV turbos or a name brand? If so what name brand. Budget is a concern of course but this is my daily.

@ZeroTo60Tube Жыл бұрын

Bang for buck, ebay turbos. Money no object on twins, the flow maxes are insane. But the best option is a good single kit.

@BMW1M Жыл бұрын

How long do you want it to last?

@BMW1M Жыл бұрын

@@ZeroTo60Tube Flow max's are no longer being sold.

@michaelsuckling3832 Жыл бұрын

If the mhd doesn't give a oil pressure reading then how does jb4 if running as a back flash to mhd give a pressure reading or is just a software gimmick?.

@scarface16134 Жыл бұрын

Show me where jb4 logs real oil pressure on a n54, since it only has a switch that's on or off no info. So this is false

@ZeroTo60Tube Жыл бұрын

JB4 does not to oil pressure either. Just oil temp

@michaelsuckling3832 Жыл бұрын

Stand corrected it is only temperature it logs no pressure sensor on any of the gauges apart from boost

@briangarcia1946 Жыл бұрын

Anyone know the name of that intake

@BMW1M Жыл бұрын

Armaspeed

@kenrossaukrsa Жыл бұрын

Does the 1M have a non oem turbo on it?

@BMW1M Жыл бұрын

The 1M has Mosselman stage 2 turbos

@bavarianhero Жыл бұрын

I was going to say 54 psi lol The sound of the 1M makes me miss having catless. That sound is like no other. Reliability over power at the moment…

@BMW1M Жыл бұрын

I have been there bro. Totally get it. Every now a then, as a N54 owner, a 'reset to reliability' is needed.

@bavarianhero Жыл бұрын

@@BMW1M I haven’t driven “Mi Carcancha” in 2 months now. Not so much the fear of breaking something but just realizing having a reliable car, being able to hit the track and meet car enthusiast seems far away. I’m sure once the time is right I’ll have that urge to go even harder again. Deeper pockets to make sure the only problem is too much boost or just my health. But yes, having a reliable n54 is way better than not having it run at all.

@BMW1M Жыл бұрын

@@bavarianhero mate, I spent 9 months where you are now 🙏🏼👍🏽

@bavarianhero Жыл бұрын

@@BMW1M not good at all but something about this car that you can’t give up on. I started with seeing neighbors having 67 through 97 Camaros growing up. That all I wanted nothing but v8s in my life. Once I got this 335i my whole perspective on cars and life changed. I used to think nothing was better than a v8. How things have changed. I still wouldn’t mind a 67 Camaro, n54 swap🤔 but it is what it is lol

@BMW1M Жыл бұрын

@@bavarianhero welcome to the happy conundrum! 👍🏽🔥😅

@TheMultiDouche Жыл бұрын

Too many for the turbo seals :p

@ZeroTo60Tube Жыл бұрын

That is the most correct answer so far.

@BMW1M Жыл бұрын

it explains so much right? It's the data point we've alll been missing!

@blrn54 Жыл бұрын

70psi?

@ZeroTo60Tube Жыл бұрын

Pretty fair assumption considering how these things like to blow smoke.

@pauliusurbonas8406 Жыл бұрын

hello, I would like to come to you, I can't get the 3.5 bar sensor working, I need your help, could you give me your contact information?

@ZeroTo60Tube Жыл бұрын

Hi There, unfortunately i dont work on customer cars. I can recomend a few mechanics. Are you based in brisbane

@biz1M Жыл бұрын

I just installed mine and this sensor doesn't look genuine. I don't expect genuine but I also don't expect an after-after-after-after-after market alibaba special. It's just a transducer but considering the junk and fakes coming out of China such as fuel pumps, wheel speed sensors etc etc won't be surprised if this hits the fan way less than genuine/oem after market MTBF.

@ZeroTo60Tube Жыл бұрын

who makes the genuine sensor out of curiosity?

@ScubaSteveArkinstall Жыл бұрын

20psi?

@ScubaSteveArkinstall Жыл бұрын

Haha I got that wrong!

@ZeroTo60Tube Жыл бұрын

These things make some oil pressure. Explains all the Smokey turbo issues

@ScubaSteveArkinstall Жыл бұрын

Haha very true! I saw something about these new oil pressure sensors the other day! I was glad to see your video about them! Cool to see on JB’s car too, still such a shame about your cars though..

@BMW1M Жыл бұрын

when are you gonna stop going sideways for a second, and join us on track for some straight line shits & gigs?

@ScubaSteveArkinstall Жыл бұрын

Haha well I’ve thought about it, I don’t have such a quick n54 (but it’s still not slow) and I’ve got 225s on the back because I want to skid! But we’ll see, maybe one day!

@frankirwin5970 Жыл бұрын

my n54 recently took a poop :(

@ZeroTo60Tube Жыл бұрын

welcome to the club..... luckily the second time you blow one up it seems like much less of a big deal

@BMW1M Жыл бұрын

@@ZeroTo60Tube Soooo true, The first is the worst.

@realfakehandle Жыл бұрын

Scam pricing. The actual part is 12617592532, which costs about 30$. How much would such a simple harness retail? 10-15$? What's the rest? MHD license? We are not even able to buy it alone. Nice money grab by NXM and MHD.

@BahNDesire Жыл бұрын

Some people can't be happy. The sensor part number isn't hidden, it's right on the sensor itself. You're paying for the assembly level program changes, I'm not talking about calibration changes. This is not an MHD product, MHD is just a requirement for flashing the program changes. This is substantially cheaper, easier to install and has way more features & fail safes than the $250+ gauge kits on the market.

@BoostieBadAss Жыл бұрын

There is a lot of time that goes into coding and developing mhd to read this sensor. Money grab? More like they’ve improved our platform for 160 bucks. If you don’t have $160 to spare then you shouldn’t be driving a BMW or just miss out on this feature…

@scarface16134 Жыл бұрын

I can promise you though you will be at the same price or more for sensor, wiring, pins, plugs, wire shielding and tools then you won't have the license and your car wont read the oil pressure... it's really a good price point. You can get a manual gauge and pay more though.

@BMW1M Жыл бұрын

Oh, so you work for free do you? Significant R&D went into making this work - I think it's an incredibly fair price!

@autoSRI Жыл бұрын

I bet you can’t buy a tube of scl and three colours or txl for that price let alone pay someone to assemble it