part numbers: clutch side - 32728532971, Brake side-3272852296.

Thank you for this. Saw it in a previous video of yours and ordered the Wunderlich mounts, which means that I finally have a good mounting point for my phone now, for those situations when I need to use Waze or other software that BMW's integrated solution doesn't support (huge missed opportunity here IMO, but this is a different discussion). Just a quick note that you can find RAM balls with a 3/8 mount, which eliminates the need for the 3/8 to 1/4 adapter anymore. Keep on rocking with these videos!

Nice video, Scott, useful for RT ánd RS - riders! BTW, I had a positive experience with the BMW SOS-device! I dropped my F850GS by trying to ride off with my disclock on the disc (wellknown problem) When I took it up I heard a telephone ringing sound and a friendly voice asked me: "This is BMW Motorrad The Netherlands; are you allright?" It came right out my handlebar LOL! I had a nice conversation with the guy. So..it works!!! Very amazing thing that should be mounted on all bikes as soon as possible!

Many thanks for that very useful video. That definitly compliments the "limited" mounting description, which comes with the parts from Wunderlich. I now mounted my parts as well to position my camera either left or right. 👍

Would love to see the long term review from the RT 🤘🏼

I can recommend the INSTA360 1" RS 360 camera as an alternative to the GoPro. You can then reframe in post, which is very cool. BTW, love your channel, even the title. Really resonates with me. (I ride a 1200 RT of 2015 vintage).

The M10 bolts with the attached ball from Ram Mounts are a bit shorter than the stock bolt holding the grips to the bars. Probably would've been fine on their own, but I bought a coupling nut and 55mm M10x1.5 stud to extend the ball-end bolt. Admittedly, it's nowhere near as clean as the Wunderlich or BMW pipe clamps. But I spent about $7 vs $140, so I'll live with the looks for now. I like the placement of these parts better, though. I may give in and open my wallet next summer.

You can also get a ram mount that screws into the top of the steering stem after popping out the BMW roundel.

If you fit a small extension you can have the Max on it's side (It will still be fully 360) and it will have a clear view forward and back instead of being obscured by your body and the screen

I enjoy your RT videos... thank you. I have a '21 RT with factory fog lights. My local dealer ordered me the 32728534366 for the left side and has the threaded hole for the light switch screw. Tackform makes some nice mounts which can come with the M10 x1.5 thread. Thanks again!

Entered those part #s on several BMW sites; no results found. Where can you find them?

I like your posts....I installed a stainless still bolt in each handlebar. From here, I can mount any kind of RAM mount on them.

Genius - been stumping me for ages….

Very helpful 😊

Grazie Scoot! 💪🏻

I think the part numbers listed in the description are reversed, when I search for the parts it says the first listed part number is the right side, meaning if you sit on the bike, it’s the riders right.

Hello, I am undecided between the RT GT and which one would you prefer in terms of weight, ease of use, and comfort?🙏

Just picked up a 2023 RT and have been looking for a way to mount my existing RAM mount to the RT. Thanks for the video! I do have a question though........ you mention the mirror mounts are 3/8". RAM has a 3/8" stud tough ball size B which is what my phone mount uses. Is there some reason you used the 1/4" stud ball and adapter rather than the 3/8" stud tough ball??

I am trying to buy the correct ball for the bmw stem part I just ordered from the bmw dealer. Amazingly enough the dealer could not tell me how the part is threaded. You are claiming that its 3/8 in thread, but I am seeing all kinds of references to M10 which I dont think 3/8 fits into M10. I blew up the ball part that you integrated into your video and its says the ball is M10. So does it need M10 or 3/8? The bmw part wont come in for 4 weeks from Germany and worst case I can wait and bring it to the hardware store to figure out before I order a ball. Help!!!

Do you know the BMW stock mirror mount part number? Mine also has the SOS threaded torx screw that it must have also? Tha ks

nice Video!🔥

Is the Wunderlich kit just for the right side (SOS) or are both for a kit for each side?

Good stuff! 😎👍🏼👍🏼

Clever.

Are those tools you keep on the bike? Would be interested to see what you carry day to day sure other people would as well

Thanks Scott, great suggestion. Here’s another solution for the mounts in case it’s a better solution for someone: kzfaq.info/get/bejne/r9ime8-Q1daXip8.htmlsi=5K8cyljggmzo4Spk. Reasonably priced, excellent workmanship & delivered in only a few days,… Now I need to figure out how I can best connect my Iphone & GoPro chargers to my 1250 RT’s battery without them draining it,….

The easiest one is ordering the RT with the optional round handlebars hehe

Can my lawyer call you to arrange my bail bond?

Or machine it

Do not remove the SOS box! It can save your live when you lay injured and incapacitated after a big crash. They will arrange emergency services to your location.

You shouldn’t be encouraging theft. It might be ok in the US, but in Europe we don’t like it.