BMW R1200GS Adventure 2008 final drive Oil change

No video

BMW R1200GS Adventure 2008 final drive Oil change

Рет қаралды 66,515

5 жыл бұрын

How to - DIY - do it yourself final drive oil change
Follow us on Facebook: / frogsangelslondon
BMW R1200GS Adventure 2008/2009 Maintenance & services playlist: • BMW R1200GS Adventure ...
BMW R1200GS ADV 2008 Valve clearance and engine oil change: • BMW R1200GS ADV 2008 V... BMW R1200GS Adventure 2008 final drive Oil change: • BMW R1200GS Adventure ...
BMW R1200GS Adventure 2008 front brake pads change: • BMW R1200GS Adventure ...
BMW R1200GS Adventure 2008 air filter change: • BMW R1200GS Adventure ...
BMW R1200gs adventure 2008 broken fog light replacement: • BMW R1200gs adventure ...
BMW R1200gs Adventure 2008 Head light bulb clip holder repair: • BMW R1200gs Adventure ... BMW R1200 GS Adventure 2008 Fog LED light and fuse change: • BMW R1200 GS Adventure... BMW R1200GS Adventure 2008 swingarm gaitor rubber boot repair: • BMW R1200GS Adventure ...
BMW R1200gs adventure 2007 Air filter change: • BMW R1200gs adventure ...
- Spray guard to rear wheel drive: T30 Torx key - 8 Nm
- Rear wheel to wheel carrier, T50 Torx key in diagonally opposite sequence - 60 Nm
- Final drive Oil level plug with new copper washer, T40 Torx Key - 20 Nm
- Final Drive Oil drain plug: T45 Torx Key - 20 Nm

Пікірлер: 38

@MacawAviculture 4 жыл бұрын

Just bought an 2008 R1200 GS Adventure...my girlfriend and I put 200 miles of paved/dirt roads, most amazing bike ever after 50+ years of riding!

@FrogsAngelsLondon 4 жыл бұрын

Very good bike indeed. Easy to maintain and to look after. Very little electronics to deal with like the new ones. Enjoy the rides👍

@slavadenco7605 4 жыл бұрын

Hi from Lviv, Ukraine) thanks for the great video! Special thanks for torques in description ❤️

@FrogsAngelsLondon 4 жыл бұрын

You're welcome buddy. Always good to have the proper torque settings in place. Enjoy!!!

@geoffnepo 4 жыл бұрын

Great vid as always but prefer the fastener size and torque spec on the screen as before

@orangelion03 4 жыл бұрын

So much easier than my 06 where you have to rotate the final drive to drain it and refill through small sensor hole. The only advantage to the older design is that it forces you to inspect and grease the spines. Once drive is tilted, you can loosen the trans boot and pry the shaft off so you can lube botheends.

@FrogsAngelsLondon 4 жыл бұрын

Absolutely right! That should be done regularly regardless the model of your bike. Thanks for the comment👍

@StephenCruthis-fl5wz 3 ай бұрын

what tool did you use to remove fill plug?

@AndreasKristiansen 3 жыл бұрын

Thank you for a great video!

@FrogsAngelsLondon 3 жыл бұрын

You're very much welcome. 👍

@The_Touring_Jedi Жыл бұрын

why in a World BMW enginneers did not made a simple fill plug like on the older models is beyond my imagination...

@markbourbonnais5378 Жыл бұрын

Really great videos of the different maintenances. I have an ‘07 GSA so I’ve been watching all of your related videos. 👍 Do you buy the o-rings and copper washers from the dealer or are they easily found elsewhere? Thanks

@FrogsAngelsLondon Жыл бұрын

Hi, I am fortunate to be located near a UK BMW dealer so I buy the washers and other small parts from them directly. Ebay is an alternative or any motorcycle repair shop will have some in stock.

@2wheelsrbest327 3 жыл бұрын

Thank you. Pleased to see that unlike on my 09 I owned on my 08 filling with oil is that much easier.

@FrogsAngelsLondon 3 жыл бұрын

You're welcome!

@228ANDY 3 ай бұрын

I simply wonder why BMW didn’t make the oil pouring hole on the top of the final gear case on the right side so that you don’t have to remove the wheel.

@LesRitaMitsouko 3 ай бұрын

How often should the final drive oil be changed?

@user-ll7ku9su8p 3 жыл бұрын

Great video, tkx

@FrogsAngelsLondon 3 жыл бұрын

Thanks buddy I hope it helps!

@felixgluhak1267 5 жыл бұрын

Great video

@iainamurray 2 жыл бұрын

Hi - can you tell me what size O ring and copper washer?

@JonBecker81 4 жыл бұрын

I hope I wasn’t the only one who laughed at 10:41. Some things will always be funny no matter how old you get.

@FrogsAngelsLondon 4 жыл бұрын

Very similar indeed

@Nigel023 2 жыл бұрын

Hello mate, what is the size of the copper ring? M10?

@shaneksmith1957 2 жыл бұрын

Thanks!

@FrogsAngelsLondon Жыл бұрын

You're welcome!

@felixgluhak1267 5 жыл бұрын

What Torx is it on the drain plug? I thought the 2008 model had the plug also above pointing to the back, not only below?

@FrogsAngelsLondon 5 жыл бұрын

Hi Felix, Thanks for the comment. Details of the torx bits and torques setting are listed in the description above. Yes, models before 2008 have the drain plugs at the back (left side). I will post a new video of the 2007 model very shortly.

@felixgluhak1267 5 жыл бұрын

@@FrogsAngelsLondon Oh great! That's my model

@ruslanismagilof7773 3 жыл бұрын

Спасибо 🙏🏼 👍

@FrogsAngelsLondon 3 жыл бұрын

Надеюсь, это поможет

@dbrockha 4 жыл бұрын

I am looking at getting a 2020 r1250rs. What is the service schedule for the final drive

@FrogsAngelsLondon 4 жыл бұрын

Hi David, regardless of the service schedule I do mine every year. A litre of oil is only about £10. Same thing for the transmission/gear box and engine oil.