Boat Performance | MAKE YOUR BOAT FASTER in 4 simple steps It really is as simple as this, if you are chasing more performance have a look at how 4 simple steps can make all the difference.
Пікірлер: 16
@rebeccacooper41612 жыл бұрын
I’ve been struggling with my little tinny thanks for the great advice I’ll definitely be giving this a go Ps I love your pink pollycraft it’s absolutely beautiful
@brenzfishing Жыл бұрын
Thanks for the comment
@jonjackinsky10024 ай бұрын
I love my dolphin fin as well. Dorsal fin is another word for it. Gets up on plane so much faster and is more stable while cruising.
@stephenellis360910 ай бұрын
The only thing I would add is an adjustable jack plate to fine tune how deep the motor sits. Like you mentioned some boats may do best with the cavitation plate level with the bottom, some may perform better with it sitting slightly above, etc… the only way to know for your own personal hull/motor combo is to play around with it. Just like you mentioned doing with weight distribution.
@brenzfishing10 ай бұрын
Adjustable jacking plates are complete game changers! Cheers for the comment.
@user-qm5wr9uf9r Жыл бұрын
Hi, cheers for the tips. When you say 25mm for Yamaha, is that above or below the bottom of the hull?
@brenzfishing Жыл бұрын
25 mm above the transom. Ie cavitation plate should be level with the bottom of the hull
@benncumms86672 жыл бұрын
Spot on with the advice
@brenzfishing Жыл бұрын
Thanks benn
@ryanferris7841 Жыл бұрын
I have a honwave sib 4m the boat weighs 86kg and my Yamaha f25 58kgs my top speed is 24 mph should it be more? I tried a higher pitch on the prop and the boat went 2mph slower lol trim needs to be in the middle because to low it drags to high the prop breaches the surface 🤷♂️
@brenzfishing7 ай бұрын
As boaties we never should stop tinkering to try and achieve greater results. Good luck mate
@ryanferris78417 ай бұрын
@@brenzfishing I ran a few more tests with trim settings and 2 prop changes! With a negative result, 24 mph is my lot with the factory standard prop
@joshmaitie59543 ай бұрын
I have a 2006 model... when i give it full throttle, it crawls.... there is no speed what can be the problem?
@brenzfishing3 ай бұрын
I would be taking it to your local polycraft dealership and let them have a look At it