I basically restored my entire boat because of you sir.... much respect
@SailingInconceivable6 жыл бұрын
Andy, I think I speak for everyone here... Your videos are *never* too long. ~Hans
@revueltaroja24866 жыл бұрын
is true.
@phygital16 жыл бұрын
Don’t care what I’m doing... I drop everything every time a new boatworks today video comes out.
@martyhandley44566 жыл бұрын
John Christopher me too.....he said he didn’t want to leave us with a cliffhanger....and yet he did....oh well waiting till the next vid.....
@adamrichardson69184 жыл бұрын
lol well....I like it so much I decided to go out and buy an old Bertram from the 70's.....tell your wife it could be worse! (I own several current gen boats, but wanted a project boat).
@hommie7896 жыл бұрын
Andy 15 minutes, 30 minutes or two days, your vids could never be too long, super interesting and just a joy to watch,.
@towmaider39645 жыл бұрын
Even with the minor imperfections in the first lay up of glass I have to say you have done a much better job then when the boat was originally built. You definitely are an artist with glass and this comes from someone with 28 year's experience in automotive body repair!
@dandelionstars3 жыл бұрын
I came over here because I am making shelving units out of foam board with epoxy, and stayed because I love your explanatory style. I have absolutely no need to know what products are best for boat building, but I watch anyways.
@rumnboats76122 жыл бұрын
Ziploc bag with the corner cut off saved my whole world!
@TheDecguy6 жыл бұрын
Good to see you back making a video again. I know it takes time away from trying to get work done while making a video at the same time and also trying to make a living while doing so. SO, thank you as always.
@peterengel78856 жыл бұрын
You know Andy, I like watching others work. I never get tired. Keep it up....
@johnlcallaway6 жыл бұрын
I like your videos about the length you make them, 20-30 minutes. Long enough to learn something, short enough that I can watch them anytime. Thanks again for the time and effort to squeeze these videos into your work schedule, I appreciate it very much.
@daviddickmeyer52316 жыл бұрын
Come on Andy, I could watch you work for well over an hour! Your video is not too long! 😂 Looking forward to the continuation....
@mwatkins24646 жыл бұрын
Your videos are not to long by no means. They are educational so they need longer than what you are making now because we are here to learn from you. I believe 45 minutes are perfect. You used to make a lot more videos than now and that’s one reason so many people watched and made you a big KZfaq success. Please make more often or make them longer please. When they are spread out so far you mess your alga rhythm up on KZfaq . Thanks 👍👍
@boatworkstoday6 жыл бұрын
Give me another month, might have a big announcement ;-)
@mwatkins24646 жыл бұрын
BoatworksToday great man your videos have helped me so much and I appreciate it ! Take care 👍👍
@jmrarmstrong6 жыл бұрын
Videos aren't never too long, actually for me the longest the better as I really enjoy watching your videos. I don't mind watching 30 minutes videos, I'm always wanting more videos to watch.
@sharpey796 жыл бұрын
I have missed watching your videos. Thankyou for continuing to make them!
@gregwebster87848 ай бұрын
I love the production boat reference concerning bubbles. Whaler isn't the most integreous company. We found a fin roller laminated into the corner of one transom repair. I won't start in about their laminating. Good job dude!
@dadedubbledee2 жыл бұрын
I just noticed your in the new shop. I guess I missed some footage. It's strangely satisfying to watch you soooo not sure whom is weirdest lol you or us the audience lol
@ernestpaul24845 жыл бұрын
The more I watch the craftsmanship and pride that goes into this type of work the more I can and will appreciate the money I end up paying out for the work to be done once I buy a used boat. I initially had ideas of doing this myself, but at 60 and in not so great shape or stamina, I will leave it to the pro's. There are a few reputable shops here in NC, which are of course about 2 1/2 hours from me, but whatever it takes.
@captainperry74825 жыл бұрын
Thanks, Andy! Great video with informative comments. Looking forward to watch more..
@ryanbertoldi83035 жыл бұрын
Glad to see that we all make mistakes, but it doesn't ruin the final finish or project in the long run ;)
@joeladams47794 жыл бұрын
Great one. Thank you
@kenpendergraft89975 жыл бұрын
Thanks again Andy for another Quality training session. And they are not too long, Excited to watch the continuation Video.
@hightide95136 жыл бұрын
I’ve drilled voids in my layups with a 1/32 drill bit and injected them with epoxy. Seems to work really well
@bobatbilletcreations Жыл бұрын
What a great job and tons of info, Thanks for sharing! You sure make it look easy and it is very much NOT easy! You have great skills my friend!
@philiphewittii26056 жыл бұрын
I think it's really great how you are helping other boating channels, like Mads from Sail Life. It really speaks to your character and I know those of us who watch boat restoration channels appreciate it! I only wish others would reach out to you since I see so many folks doing so many wrong things, I fear for their lives if they ever launch the boat they are working on. Keep up the fantastic videos!
@robertcarey91216 жыл бұрын
Good Vlog! I enjoy working with any fiberglass such as dive board, swimming pool, vehicles and of course boats. Lot of people don't understand the fiberglass. The fiberglass is forever but not the wood. Keep going what you are doing double thumb up!
@patmcdermott85476 жыл бұрын
Fascinating as usual. Back when dinosaurs ruled the earth, my father built plywood boats at the old Yellow Jacket boat company in Denison, Texas, so I have always enjoyed all aspects of boat work. As others have noted, when you put up a new video, everything else can wait for a bit, I have to sit down and watch it.
@shoresharp83496 жыл бұрын
Can't wait for the fairing episode! Thankyou for making these videos 🖒
@geneberry71146 жыл бұрын
Love the little kids voice giving the close out : )
@jamesford83156 жыл бұрын
I knew you would be back and I don't mind the wait. You always put a great video together. I have looked at previous videos multiple times in order to do the job right the first time. Thank you for sharing.
@edrussell79606 жыл бұрын
Awsome work my only complaint is that I now have to wait for the next episode. Haha. Love it. I have never worked with fibreglass at all and used to think of it as a sort of something you would have to be a chemist or "wizard" to use. Watching this channel and a certain Danish fellow, you guys have shown me that it is fairly simple and straightforward. I'm hoping to get a vessel to sail away in someday and these vlogs help give me confidence to be able to do some of the work myself. Thanks for sharing.
@samflora72274 жыл бұрын
Love the vids, just started a job assembling military boats and yachts and I’m already in love. Your videos are very helpful
@technicstim6 жыл бұрын
Andy ive had to talk to my wife for over a month and i hold you responsible ! please more videos more regularly !
@almath99876 жыл бұрын
Andy thanks was missing you and the videos they cant be long enough
@pezpengy93086 жыл бұрын
You make great videos! I spent years maintaining the University of Hawaii's lasers and fj's which is where I learned to HATE fiberglass. I recently fulfilled a dream and bought my own sailboat and your whimsical yet professional work gave me the confidence to overcome my fear of working on my boat... and now I have a great sailboat that is better than new!Plus... I never thought I would ever see someone that - for no reason other that its fun - would draw smiley faces on their work.Thank you for your videos. They rank higher to me than hurricane warnings. I can live with a storm, not having boatworks videos though.... that's depressing. :)
@jaysparc5 жыл бұрын
Your videos are a joy to watch. My business is installing window film on flat glass (houses/businesses) and there's something very satisfying about certain parts of the job. I can totally identify with your comment on the roller.
@djmjr776 жыл бұрын
So glad you got to this vid, have been waiting to see more on this project, thank you !!
@GS-qx6cn6 жыл бұрын
Honestly, I don't know how you can stand to do all of that sanding! I did one project 2 years ago (gel coat removal, hull repair, and re-coat everything) - thanks for your help, Andy - and I still can hardly stand to look at a sander after all the hours I spent grinding away. You have the patience of Job!
@SuperM16876 жыл бұрын
Seems like if you're sanding too long it is proportional to the type of sandpaper you're using. I've definitely seen a difference in sandpaper from the 80's vs.todays stuff. Not sure what everyone else is experiencing?
@Seawizz2036 жыл бұрын
Andy! Where have you been? Nice to see you back. I look forward to all of your videos. Keep them coming! Thanks
@Jcon19886 жыл бұрын
Recently came across your videos as I'm in the process of replacing the transom on my 15ft 1967 steury. Have been more than helpful! I'm still in the process of tearing out the wood...those last few inches on the bottom are a bear..I havent tried the chainsaw wheel tho 😀..ive been waiting for this video as I've never used or worked with fiberglass so trying to learn everything I can before getting to that point. thanks for what you do....man lol
@netpackrat6 жыл бұрын
Thanks for another good video. I learn something new from you each time.
@SurfJohan6 жыл бұрын
HI Good job! In case you missed it. There is unaccelerated Vinylester where you ad accelerator like cobalt yourself. This makes the shelf life alot better. Just be careful: NEVER MIX ACCELERATOR AND PEROXIDE-! explosive!!! Keep up the good work! Best regards Johan
@Wavezone3043 жыл бұрын
Im at this stage now with my 1996 Tempest 16 Ft Bowrider. All the "hard work" is done lol
@MrOne9254 жыл бұрын
Liked the clarification on layering, thanks!
@southernboy77916 жыл бұрын
I concur with the rest of the audience, your videos are too short. I'd blame the quality of the content though; it's brilliantly done! Can't wait to see how it looks when you're done.
@yeoldepirate7835 жыл бұрын
very good video, Andy Its real world,, the things you pointed out in the end will and do happen to alot of folks we all learn like this great job,, as you know these are easy fixes I might add or suggest you add a section of foam on the cap and the inside coroners easy to shape and much less air in the laminate ,
@mikefriend75703 жыл бұрын
Love it. So informative. Always worth watching
@noacktexas2 жыл бұрын
Love your videos!
@TheFritz4236 жыл бұрын
Started watching your videos after researching fiberglass techniques (considering restoring an old center console bay boat). I appreciated this video most of all, quick and to the point. Thank you!
@mickylottering6 жыл бұрын
Hello there all the way from Zimbabwe. I love your videos and really glad you've posted one about a transom replacement. I have a 19 foot Cabin Cruiser made in Zimbabwe by a company called Pane's Boats. It used to have a OMC 3.4 ltr stern drive but have found a newer 5.7 ltr OMC daddy King cobra inboard outboard unit that I would like to fit into it. I will have to redo the transom because the hole is much bigger for the old stern drive unit and the newer one a smaller hole.
@ecmo20075 жыл бұрын
Andy, I am certainly not questioning you. I was under the impression that Vinyl Ester did not adhere to epoxy? Thanks again for your videos. They are fantastic.
@grosseileracingteam6 жыл бұрын
Hey Andy,good to see you back again.Thanks for 'splannin your thought process on small to large lamination.Gonna be time to start winterizing soon here in Metro Detroit,even though it got up to 92 today.Thanks for posting.
@ragtie61773 жыл бұрын
Great video!
@lorenzocupid1802 жыл бұрын
Hey u do work on boat for customers love your work u take pride in it good job boss
@franklindmurphy6 жыл бұрын
Andy I love your videos and I get super stoked when I see a new one come out.
@brianwhite54646 жыл бұрын
Great seeing another episode on the transom. Keep the videos coming!!! Hope it's not another lengthy hiatus before the fairing episode! Hahaha!
@boatworkstoday6 жыл бұрын
I deserve a little ribbing ;-) It's been a crazy busy past couple months!!
@brianwhite54646 жыл бұрын
@@boatworkstoday I completely understand, you know I was just busting your chops. Always good to be busy than not; make that money while you can!
@doctorluigi4 жыл бұрын
@@boatworkstoday You might be busy because you do quality work, that layup looked like it bonded to the core of my soul. When my resin starts to pop off i just stop and let it harden while I prep other jobs. Then come back and start laying up again, sometimes it takes longer but I dont have an ocd fit over the bubbles.
@tubetubejohnny6 жыл бұрын
So glad you're back! I really enjoy your videos.
@herbmarsh85194 жыл бұрын
mate, all i can say is you have a new fan and subscriber, cheers from Australia
@kamoboko866 жыл бұрын
I really wish your videos were longer actually. I’m interested in the process and thought process as well. Don’t worry about video length bro.
@tjaxx8216 жыл бұрын
Enjoy the videos! Keep them coming.
@mickfisch966 жыл бұрын
Thanks Andy. It’s been too long I’ve missed you!
@samsvibes4 жыл бұрын
Excellent !
@jamiedaver30625 жыл бұрын
Great Tutorials Mate. Really appreciate your work, Thanks So Much. I think I would have given up on my boat if it weren't for your channel.
@MRKUE6 жыл бұрын
Great video! Glad to see your still at it!
@love2cad6 жыл бұрын
Fantastic as usual!! Well done, thanks for all your tips and tricks.
@JJPetro6 жыл бұрын
Love your newer format, talking over video as work is being done. Allows you to pack in the verbal detail while showing the actual hands on. Much better than a year or two ago when there was more discussion and verbal explanation than hands on. Great job!! When will the fairing/gel-coat video be ready?
@WreckDiver996 жыл бұрын
Come on Andy, you KNOW you wanted to say "Sanding, Glorious Sanding" at 1:18 LOL!!!!
@MrClickbang3576 жыл бұрын
Nice video - you got my Thumbs up! But I did notice something that I thought was a BIG NO NO!! I worked in boatyards for 5 years and was always told to NEVER cover epoxy with polyester (or Vinylesteer?) because of epoxy's outgassing!!! I would love to hear your reply! Keep up the great videos!!!
@boatworkstoday6 жыл бұрын
For the most part you're correct but there are ways with West System epoxy that it can be done. First is letting it cure for a few days, then clean and sand very well for bonding. I would not do it over a large area but by the time everything was sanded flat and shaped there really wasn't much epoxy left. Also the glass itself was wrapped over it on both sides so there was still quite a bit of area that was laying onto the original poly / vinyl surface :-)
@craigmonteforte14785 жыл бұрын
Thanks for the video i always enjoy your narration and tips
@gagmewithaspoon6 жыл бұрын
Thanks for sharing Andy.... Awesome...
@kensenzig51166 жыл бұрын
Agreed---never too long!!!
@jonpaulporretto89316 жыл бұрын
I had been waiting weeks to see how this came out. Was wondering if your ever going to make any videos involving and foam based materials for strength instead of plywood? Also would love to see you go into detail on your thoughts on 1 stage paints vs gel coats. Thanks
@mike-Occslong6 ай бұрын
Great vid
@Breal1913 жыл бұрын
You should do one for covering holes on teak
@johno68616 жыл бұрын
Vinylester is good for a transom, much stronger than poly. You can’t get me away from my epoxy though. I epoxy over glass but never glass over epoxy.
@cashysmashy53065 жыл бұрын
Your work looks good man👍🏻 I would have just bagged and infused it all in one shot with the color matched GP 😂 and just had to shoot a finish pass with matched gelcoat and been done with the entire job in one day😂👍🏻🏁
@rogermccaslin67505 жыл бұрын
One minor correction for you. Super 77 won't dissolve in poly or VE resin. If fact, if you use too much you can jeopardize the bond. There are resin compatible adhesive sprays like Infuzine and Nautigrip that will not affect the resin but they are not usually available at the corner store. It is better to usd the resin to hold the glass to the substrate but if you must use something like Super 77, use it very sparingly. Just a mist. Don't spray it like you are tagging a billboard.
@michaelwallace8976 жыл бұрын
I do so enjoy the very educating videos. Thank you sir.
@jonnyboy5136 жыл бұрын
Worlds strongest transom!
@tybritt15 жыл бұрын
Since your boat has a given value in dollars. Why do this great job of repairing it properly like the video shows. And spend good money after bad. The boat won't be worth any more. Bolt 1/4 inch aluminum plate inside and outside with sealer against the hull and go for a boat ride for anther 30 years. Ty
@4546rc6 жыл бұрын
Andy where have you been ? waiting over a month for next video keep them coming!
@imageguyimageguy13162 жыл бұрын
I use "slow" hardener on large areas. some people do not like it
@stevieg.48165 жыл бұрын
put a cover plate on your switches please, always learning from you thank you!
@timjs10186 жыл бұрын
Well worth the wait! Fantastic as always.
@eriksunden55246 жыл бұрын
Great job . Erik in Sweden
@ericsteel76436 жыл бұрын
Great vid J O !!!
@idroolt69996 жыл бұрын
Great vid as always. Thanks for sharing, Andy. :)
@MrRoach-yo3mz6 жыл бұрын
As the glass man in a busy shop here on the shores of the Chesapeake Bay, may I say "Job Well Done" ..... I have 4 or 5 transoms in front of me to do as we speak, I wonder how many ive replaced in the past 44 years? ..... Thanks for the video.
@SomeGuyInSandy6 жыл бұрын
Super 77 is amazing, but use it in a very well ventilated area!
@MPlett10Ай бұрын
Thank you very much for taking the time to inform us, really appreciated! I got a question I thought polyester resin doesn't stick to epoxy, wouldn't there be problems with using the thickened epoxy to fill the gaps and then laying poly glass over it?
@overlandhunter11815 жыл бұрын
Great stuff. Thanks for sharing
@jhup94485 ай бұрын
Good 👍
@horseshoe1824 жыл бұрын
good one, thanks mate!
@UweBehrendt6 жыл бұрын
thanks
@condielangham46222 жыл бұрын
You are a little weird but I like you anyway, You have knowledge and experience and are a good teacher. Where are you located ?
@myriammorrison9840 Жыл бұрын
I can see the fin roller area!
@refiii94995 жыл бұрын
Looks great! How come you don’t blend and lay layers into the bottom of the boat along with the top and ea side? I would think that would be the most critical joint of the transom repair? She’s really looking great!
@bizzybone4853 жыл бұрын
Awesome video, always! You are my go to for check for everything. Question, would you recommend doing this same practice on a transom without the different elevations of the transom as the 25 Whaler? I am working with a transom on a 22-2 fishing center console ( Aquasport) and the core is shot. However, the liner and floor is still good and its a classic so I do not want to disrupt the inside liner at the moment like most rebuilds I see done. Your input is greatly appreciated.
@squid00136 жыл бұрын
I wish you were in the texas area i would love to come learn this in person
@cepuras6 жыл бұрын
Eventually I’ll need this done.. I dread the day. Maybe I just make a road trip and drop it off with you..
@wtfjpgmailcom6 жыл бұрын
Love yer videos
@justinsorci59985 жыл бұрын
Something I’ve been baffled by for quite some time is why not make transoms and stringers out of lots of fiberglass layups equal to the wood variants. This way there’s nothing to rot out to be replaced.