Getting Started | CAM - BobCAD-CAM Webinar Series
Рет қаралды 9,010
Күн бұрынIn this webinar, we cover how to use many of the essential CAM features and how to go from a part model to g-code.
Topics Include:
- How to Use the Stock Wizard
- How to Create Toolpath for Pockets and Profiles
- How to Make Changes to the Machining Order
- How to Post Your Job
Host:
Al DePoalo
Voice of BobCAD AfterDark Videos
Original Date of Webinar: March 1, 2017
Try BobCAD-CAM Today
Download a Demo: bit.ly/2misZls
Get a Personalized Tour of BobCAD-CAM
Schedule a 1-on-1 Demonstration: bit.ly/2mlNvlD
Learn More About the Latest BobCAD-CAM
See What's New: bit.ly/2mNFweB
Learn More About CAD-CAM Software
Download a Free White Paper: bit.ly/2mlBzk0
Visit us online :
www.bobcad.com/
/ bobcadcaminc
/ bobcad_cam
/ bobcadcam
BobCAD-CAM Corporate
28200 U.S. Highway 19 N. Suite E
Clearwater, FL 33761
Toll Free: 877.262.2231
Intl: 727.442.3554
Customer Service / Technical Support
Tel: 727.489.0003
Intl: 727.442.3554
Fax: 727.442.1773
@robhampton4929 7 жыл бұрын
Good Session today Al. I am in Melbourne Australia so don't get to join the Live webinars ( It is on at 3.00am here). I only use BCC for a hobby. I am finding these sessions much easier to follow. Thanks Rob
@BobCADCAM 7 жыл бұрын
Rob that you for tuning in, maybe someday we'll have a live webinar on your time zone...
@monjetibetano2012 7 жыл бұрын
thanks Al
@leonardsmith2778 7 жыл бұрын
Al, maybe i missed it, but how are you adding vices and stuff to the simulator, is there a video on that?
@Depoalo 7 жыл бұрын
You can download work holding files, or create your own. Then just merge them into the file. I put them on their own layer so I can turn them on and off.
@leonardsmith2778 7 жыл бұрын
ah so not adding it to the simulator but to the cad tree. got ya.
@Depoalo 7 жыл бұрын
Correct you add the work holding models into your design . Then when you launch simulation, if they are visible, they will show up in simulation as your work piece
@schoonymopar Жыл бұрын
guy is good at showing the systems feature but very bad at teaching others to use them. he goes way too fast for new users.
@BobCADCAM Жыл бұрын
Try these launchpad.bobcad.com/courses/v35-getting-started-videos
BobCAD CAM
Рет қаралды 8 М.
Depoalo
Рет қаралды 1,4 М.
Buy Smart┃Магазин ноутбуков
Рет қаралды 1,8 МЛН
LED Screen Factory-EagerLED
Рет қаралды 14 МЛН
xunyu
Рет қаралды 2,1 МЛН