bodgit and leggit garage tips and tricks inside your video hopefully help you don't forget get your hands dirty serviceing 2002 ford modeo 2lt diesel
Пікірлер: 54
@JoeBob795693 жыл бұрын
Antifreeze is always good. I had a slow leak in the rad in my old car and it was on the long finger for months; and I just kept topping it up with water. Then one icy morning I started the car and heard some weird noises and got a smell of burning rubber. The water pump had frozen solid with just water in there, and it melted the fanbelt trying to spin on it!
@ertugrulkumru78838 жыл бұрын
well done..I have got a ford mondeo ghia x 2004 model (modeo 3)..Thanks for the video my friend. I will change lot of things.. Thumbs up :)
@bodgitandleggitgarage8 жыл бұрын
glad I can help mate thanks a lot for watching get your hands dirty
@shadowboybass8 жыл бұрын
the line in the pompe is the line on the mindle the filter..
@kevinb2049 жыл бұрын
I never had a problem starting them after changing fuel filter grand once you fill the filter...on another note did you ever change a fuel filter on a 1.7TD astra?? Loving the vids keep up the good work mate.
@bodgitandleggitgarage9 жыл бұрын
Hi mate thanks just check for your pipes are on correctly it might be drawing air if not it's air locked
@bodgitandleggitgarage9 жыл бұрын
The easiest way to unlock it would be to open 1 and 3 injector turn over the car until diesel comes out lock them injectors backup an open 2 and 4 turn over again lock them up and then it should start any more questions just ask
@bodgitandleggitgarage9 жыл бұрын
Yeah done lots they're ok what are the hardest engines to bleed i think is the diesel ford engine
@kevinb2049 жыл бұрын
I only ever had a problem with a 1.9D caddy it ran out of diesel an would not go towed it an everything.Had to put a primer on it then and away she went ha.Btw is that your green mk1?
@peterstevens44718 жыл бұрын
hello,great video,can you do a video on Mondeo mk3 over revs from start up on mine, I think it is PCB pipe leak because I can hear a hissing sound ,but don't know how to do it,can you help?
@charlesscottkelly4 жыл бұрын
Can doing a full service on a mondeo mk4.5 cause any problems with a turbo. I just got my car from halfords after a major service in the way home the turbo is acting up.
@drchunkybiscuit99738 жыл бұрын
I have 1 question for you. I have a 2.0 litre, but when I start it up it chugs like a Tug boat. It does exactly the same thing hot or cold. Just sits there chugging away. What do you think it is please? I've tried to look it up and people say different things. The main thing is that it might be the Cambelt Tensioner & Crankshaft Pulley Wheel? Could it be that? Would love it if you could help me as it's doing my head in. Many thanks.
@JMUDoc7 жыл бұрын
Any chance you could do a video on the heater flaps? Mine groan for a good 30 sec - 1 min after I switch off and it's doing my head in! Common problem, by the looks of the forums.
@bodgitandleggitgarage7 жыл бұрын
hi mate as soon as i get one in i will do it
@MrEvilWasp9 жыл бұрын
Hi i was wondering if you could help me please. I have a 1.8 MK3 Mondeo and my brake pedal is really hard to press down. When i have my foot on the pedal and start the engine it relaxes as it should do and be pushed to the floor but soon as i take my foot off and put back on again it goes back to been really difficult to move without a lot of force. Do you have any idea whats going on? Peace
@pauloneill89125 жыл бұрын
hi ive just got a mk4 mondeo estate and im gonna attempt the timing belt was wondering if you have a vid on this, many thanks for all your vids
@bodgitandleggitgarage5 жыл бұрын
Is it a diesel mate
@pauloneill89125 жыл бұрын
@@bodgitandleggitgarage hi sorry yes its a 2.0 ltr tdci
@bodgitandleggitgarage5 жыл бұрын
@@pauloneill8912 hi mate I thought I did film it looks like I have not so sorry I don't have one but I have lots of other timing belt videos pretty much all the same
@pauloneill89125 жыл бұрын
@@bodgitandleggitgarage no worries many thanks for your help, your a gent
@bodgitandleggitgarage5 жыл бұрын
@@pauloneill8912 anytime mate just sorry I didn't have the exact video you was looking for once I get the next one and I will film it
@erwinees4 жыл бұрын
Hello mate, my tdci mk3 Mondeo has plenty of fuel in it, no air coming from fuel filter, trying to start it, it cranks and at the same time it produces small coughs but doesen't fire up, pressure pump seem to work, got fuel to all injectors, car worked perfect before I changed the fuel filter. Any thoughts?
@bodgitandleggitgarage4 жыл бұрын
you need to check your pump pressure properly
@oladimejimuse28787 жыл бұрын
hi mate, on my Mondeo (2002 diesel, 2.0) oil is coming out around the injectors at three cylinders. Will over filled pub oil cause this symptom? Also the engine smoke heavily allover. Thanks for anticipated response. Regards. - Oladimeji
@bodgitandleggitgarage7 жыл бұрын
Oladimeji Muse there is a seal between the injector and the rocker cover that might be leaking also there is a seal between the engine and the injector this could be leaking and causing it to smoke as well best thing to do first is replace them and give the injectors and the pump at clean and then go from there
@oladimejimuse28787 жыл бұрын
bodgit and leggit garage grateful thanks. I will feedback after fixing. thanks once again. regards. - ladi
@davidibirch30259 жыл бұрын
Hi mate I am trying to identify a part on my Agila 1.2 design. It is a plastic pipe that sits in the side of the air filter box then flattens out towards the front grill underneath the bonnet , it has something to do with air intake. Can you help please?
@kevinb2049 жыл бұрын
It's just to direct cold air into the air box
@bodgitandleggitgarage9 жыл бұрын
David Birch hi mate its a cold air intake
@shadowboybass8 жыл бұрын
i have same car !
@GymChess7 жыл бұрын
What's your opinion on Mondeo petrol/ethanol 2008?
@bodgitandleggitgarage7 жыл бұрын
GymChess in my experience they have been a very good engine haven't really had many problems with them as long as you service them regularly and keep on top of everything
@danielp97217 жыл бұрын
hi have you ever had a modeo tdci cut out randomly if so have you found the probelm.
@bodgitandleggitgarage7 жыл бұрын
Daniel phipps hi mate unfortunately that type of problem as about a million different symptoms you are going to need to get it plugged in and tested if I tell you something and it is wrong you're just be replacing parts and could cost you a fortune
@danielp97217 жыл бұрын
hi mate thanks for getting back to.me its the turbo wastegate its sticking closed i got it look at today great vids mate thanks
@bodgitandleggitgarage7 жыл бұрын
Daniel phipps well spotted mate they can be a bit of a nightmare to find good job
@judgedredd95749 жыл бұрын
how much do you charge for this type of service?
@bodgitandleggitgarage9 жыл бұрын
Hi mate on this car is was 180 euros but we do a lot more than what you see on cam who do full diagnostics and a full check brakes tyres bushings excetera and car wash
@JAMMASTERconnor9 жыл бұрын
Hi, where abouts isn your garage based?
@bodgitandleggitgarage9 жыл бұрын
JAMMASTERconnor hi mate ireland
@shadowboybass8 жыл бұрын
and the whater is red not blue....
@JariMustafa8 жыл бұрын
What the.....? Did he just mixed red with blue water?....
@shadowboybass8 жыл бұрын
+Mustafa Jari no i dont mixef red with blue..
@shadowboybass8 жыл бұрын
+Mustafa Jari i have the same car ....mondeo 2.0 tdci 2003 and the whater is red !
@adrianjohnlouis16 жыл бұрын
Pink
@somervillearron9 жыл бұрын
the suitable stuff is red
@bodgitandleggitgarage9 жыл бұрын
Arron Somerville ?
@bodgitandleggitgarage9 жыл бұрын
It depends on who makes it
@shadowboybass8 жыл бұрын
you disel filter is bad you wire th line in in the line out abd line out in line in :)))
@peterstevens44718 жыл бұрын
hello,great video,can you do a video on Mondeo mk3 over revs from start up on mine, I think it is PCB pipe leak because I can hear a hissing sound ,but don't know how to do it,can you help?
@bodgitandleggitgarage8 жыл бұрын
hi mate I can only do that when I get a Mondeo in but what I suggest you do is get a spray bottle put some washing up liquid in it and spray it around the pipes you will see it bubbling where the leak is that's one of the easiest ways to find a leak you can do other ways but that is the easiest way at home hope this helps thanks for watching don't forget get your hands dirty
@JMUDoc7 жыл бұрын
Over-revving or hunting idle, but normal operation otherwise, is probably a vacuum leak; my own Zetec S V6 had a stuck-open PCV valve that had sucked a breather hose to shreds. Get a Haynes manual and find the valve and its outflow pipe;).