Bolt and nut measurement

Рет қаралды 323,468

Күн бұрын

Пікірлер: 61

@saitmillwright804 7 жыл бұрын

Check out my other video that explains in detail on using a thread pitch gauge. kzfaq.info/get/bejne/grWCo7yVr9fMdp8.html

@awanitkumar3961 6 жыл бұрын

Ty brother

@harsham2004 6 жыл бұрын

SAIT Millwright

@gloriouschannel3683 3 жыл бұрын

I get the M and 8 etc but i don't get the other things. For example. M8 x 10. What's the 10? The lengt of the bolt/treath?

@afghosting8772 5 жыл бұрын

Thank you. This helps. I just am astonished at how seemingly overcomplicated this is.

@BryanMax 7 жыл бұрын

Great info, thanks for posting

@timwright7738 2 жыл бұрын

didn't know about thread pitch gauges or tap drill charts... so thanks!

@johanherrera8117 2 жыл бұрын

Very nice video congratulations 🎊 I have a question, there's a direct relationship between the size of hexagon head an the size of bolts body, can you give me a light on that please, I will appreciate that. Bless.

@harryhite2894 2 жыл бұрын

How do you did bolt length from measuring the diameter of the bolt length of body with caliper??

@yurroad2591 7 жыл бұрын

how to know the correct spanner for a bolt?

@kojomensah7474 2 жыл бұрын

Is the m20 written on top of the bolt pls??

@zeus245 6 жыл бұрын

I have a m12x1.5 lug nuts, can i use a 9/16"-18? Or what is the nearest equivalent?

@saitmillwright804 6 жыл бұрын

I would use the same as the original only.

@rickkstir 8 ай бұрын

How did you know to go from metric (20mm) to imperial (3/4") on the first 2 bolts?

@sahilmansoori3511 2 жыл бұрын

Can we use this method to make its model in Solidworks

@cheapcigs9772 2 жыл бұрын

Bro....I don't even know you and you're a better dad than my dad, lol🤝🏻👍

@GoTo-KleckfilesDOTCOM Жыл бұрын

I have all these bolts and I'm like how the heck do I measure him and I've looked and looked and all these people give all these explanations and I'm like I don't know what the heck they're talking about and you have the most comprehensive one thank you sir

@khontsuen 9 ай бұрын

Saya juga..kepala 6, garis 3 no 8....bla..bla.. .bla. Kenapa tidak langsung saja, baut ini bersaiz sekian 12, kepala bernombor 4.. Nilai torsi baut ini harusnya ialah sekian..🤢

@shantutalikoti1212 7 жыл бұрын

Super message

@nafisahmad4968 2 жыл бұрын

In a bolt/ screw packages I found 's25' written Also 'k ' written What do they mean?

@doreenwatson-read 2 жыл бұрын

very helpful thankyou

@GabrielKozsar 7 жыл бұрын

Where can I find the chart in the video ?

@saitmillwright804 7 жыл бұрын

The chart in the video is one we provide our students here at SAIT. It is just a tap drill chart and they can be found all over. I would just search one up on google.

@jessenurse9194 4 жыл бұрын

Hi, I found this to be the best tutorial on this subject, but on measuring the nut you lost me because I’m not so good with math and this is imperial, but I’m metric so I don’t understand. HELP Me please

@thepixinator2592 3 жыл бұрын

At 1:52 how do you tell which bolt is metric just by looking at it?

@ralph5450 2 жыл бұрын

You can't. You have to look at the head. 3:22 Metric has numbers and standard has lines. He of course already knew.

@gvsaisasank9787 7 жыл бұрын

The inside diameter of the nut is 0.655 inch approx. and the outside diameter of the nut is 0.75 inch. How can they both fit together.?

@Mainer1945 6 жыл бұрын

It is because you need to measure the bolt on the ouside diameter of the threads, and you need to measure the same for the nut, but that is more difficult. The 0.655 is the inside diameter of the theards on the nut...as you said.

@olaleyeomoyajowo7585 5 жыл бұрын

Where do i download the tap chart

@saitmillwright804 5 жыл бұрын

I would search it on google. Search for tap drill chart. They are very commonly supplied by bolt supply companies as well if you would like a hard copy.

@Ashishkumar-ty3ug 6 жыл бұрын

How to know the size of bolt as per thickness?

@saitmillwright804 6 жыл бұрын

A tape measure or ruler would work well. You could also use a caliper. Just measure across the threads.

@Mainer1945 6 жыл бұрын

Best to use a outside micrometer.

@RacistRandy 7 жыл бұрын

Yo this was dope AF keep up the work. Word.

@saitmillwright804 7 жыл бұрын

Thanks eh.

@TiberiusStorm 7 жыл бұрын

What about bolt head size?

@saitmillwright804 7 жыл бұрын

That can be found by measuring across one flat side of the head to the other.

@2002Term Жыл бұрын

You sounds like Ed Bolian from vinwiki

@conqwiztadore2213 5 жыл бұрын

Uhghhh can i just use a tape measure?

@zachharper216 3 жыл бұрын

was this the caliper you used: Mitutoyo 530-119 Vernier Caliper, Stainless Steel, Inch/Metric, 0-12" Range, +/-0.0015" Accuracy, 0.001" Resolution... Could you recommend one?

@timthomas129 7 жыл бұрын

peep the fps

@gjarucki 3 жыл бұрын

This is ridiculous. Who the f came up with such a complicated method. Good video tho...

@cyjothomas4121 3 жыл бұрын

doesnt mention how to messure the length of bolt

@saitmillwright804 3 жыл бұрын

If it's a hex head bolt, measure from the bottom of the head to the end. If it's a fastener with a "V" shaped head for counter sunk holes, measure the entire length of the bolt.

@amrh4259 7 жыл бұрын

3:38 sorry ,i can't heard what you say 8.8 mean what ?

@saitmillwright804 7 жыл бұрын

It is the Grade of the fastener.

@OxygenGenesis Жыл бұрын

4:54 where the nut gets measured

@tiltilton 2 жыл бұрын

Insanely over- complicated. Thanks for explaining.

@tiltilton 2 жыл бұрын

Isn’t it about time the US standardised to the metric system? As we’ve done here in the UK despite the resistance to change, mostly from older people.

@francoamerican4632 Жыл бұрын

The US was supposed to switch over to using the metric system in the 1970's. Fast forward almost 50 years and we're still using the same crazy, illogical system that everyone else stopped using decades ago. 🤔