Make cool shit and put it on the internet! Hand Tool Rescue / erzzi6 Thank you for your help keeping our little corner of the internet a corpo-BS-free zone! / ave
Пікірлер: 3 400
@DMo.085 жыл бұрын
You can pick me and display it on your wall. 😁
@arduinoversusevil20255 жыл бұрын
Fantastic idea! Unfortunately, I'm not an elected official.
@DMo.085 жыл бұрын
AvE well in that case I would totally display it 😎.
@alexmarble15325 жыл бұрын
You can pick me and I'll reference it when I design tools (design student). I appreciate the videos!
@Demicron5 жыл бұрын
Crush more rocks.
@jaquo255 жыл бұрын
Oh, I sure would like to have one o those. I could wreck my thumb good and proper. Not that I would use it for anything practical mind you...
@thetruth18623 жыл бұрын
I love how he speaks, Canadian, English,French, and Tool speak all mixed together
@KevinSanchez-hh6gp3 жыл бұрын
Big facts
@narutonish3 жыл бұрын
And Spanish
@netrioter3 жыл бұрын
Lose the french and I'm 1000% onboard.
@amielrumbaua83873 жыл бұрын
He's a pirate that happens to speak machinist
@leocorral3 жыл бұрын
Don’t forget spanish
@SudosFTW5 жыл бұрын
The man at his bench felt distraught, with his wrench not as strong as he thought. The wife had the spare in the bedroom with care for a business-end thicker she sought.
@ALMIGHTYBUNGHOAL5 жыл бұрын
Thar be some damn fine poetry.
@ss339885 жыл бұрын
Hijacking a liked comment, ave very nice of you to give it away mate. Pity it'd cost you double the Canadian pesos to send it Down Undah
@taylorgriffin74685 жыл бұрын
There once was a man from Saskatchewan For crusty tools he did lust upon He found just the thing, a wrench fit for a king And indeed, in it's name it did say soFor the thrill of the peanut gallery He sent his fine tool to AvE With less than a moment of awe It was straight in the torque'matic's jawsBut upon such a rigorous test And against the worthy Wright's wrench The old wrench fought well, but in battle it fell And blew it's one nut prematurely
@HandToolRescue5 жыл бұрын
Haha, beautiful.
@lordclangtheintolorable20945 жыл бұрын
Only on the fukin internet can you find such splendor.
@nigelqflarp3 жыл бұрын
OH LORD, MY HERNIAS! 😂😂😂😂😅😂😂🤣😂😅😂😂
@DrDevon233 жыл бұрын
You big bully! Made me spit out my lunch and cry.
@jasonwood73405 жыл бұрын
I started a new job at a machine shop a few weeks ago, and I bet I could find a use for it there! You and Abom79 both inspired me to start a new career, and I am very grateful for the time you guys spend making videos. Thanks!
@halnywiatr5 жыл бұрын
Important Technique Information: A forgotten trick (unless you were taught by a grandfather who used these a hundred years ago) for increasing the strength of the wrench: Place a nut of the same size as the one you are removing into the "opposite-side-jaw", that will transfer much of the force directly to the frame and not through the threaded post. That back overhang is there for important reasons, including right angle turning.
@BakerMikeRomeo5 жыл бұрын
it took me a second to pick up what you're putting down, but now that I do: that's damn clever! thank you for posting this!
@TheRazzeus5 жыл бұрын
I'm not entirely sure I follow this. Mind explaining it differently?
@justinweber75475 жыл бұрын
TheRazzeus There is a ledge on the back end of the wrench that can accept nuts as well he is saying place a nut there of the same size as the nut you are clamping down on and it will decrease side load on the frame basically not allowing it to spring open as easily
@timostrom57105 жыл бұрын
yeah, i think i need a pic. sounds smarter than the rope trick...
@timostrom57105 жыл бұрын
nvmnd! i get it. yeah. cool.
@SkewToob5 жыл бұрын
Keep the marked part, swap in the unmarked part. Everyone wins.
@triple67585 жыл бұрын
Rigid tool forges those adjustable wrenches for Wright Tool. Also for Proto. They are good tools. Used lots when I worked in a pump shop.
@russellgary25755 жыл бұрын
I would love to have it. My dad is retired Ford Tractor/Agricultural Mechanic witch I learned the trade just as he did. When I was out of High School there was no calling for Ag Mech. I side tracked and went Automotive. He would just love it. It has a lot of resemblance to the old ford tools in the tool boxes on some of the 1950-1960 era tractors. Love your channel.
@bur1t05 жыл бұрын
Actually kind of clever the way that one failed. By selecting a material for the nut to be a metal softer than the thread, the tool can fail and the only cost in repairing it is another nut, and a few minutes filing the metal out of the threads. Also not really worth welding one of those tools back together, they're drop forged, so it'll never be that strong again.
@arghjayem5 жыл бұрын
bur1t0 agreed. It’s designed to fail at a certain point and be easily mended after. Yes the other tool failed at a higher point but it also destroyed the tool to the point where welding it back together is both a higher skill task and kinda pointless because you’re rejoining the weakest part of the tool with a weaker joint. Realistically how often is a tool gonna be under that much strain anyways? Much better to have to replace a nut and refile, than weld a tool back together.
@SuperJohn123543 жыл бұрын
@@arghjayem the other tool is designed to fail at the replaceable part as well, just cheaper to buy a whole new tool.
@stevenbrown56935 жыл бұрын
We have confirmation of HUMAN elbows!
@Nitro-Finn5 жыл бұрын
Steven Brown Fake news! That is the tentacle of the lizard Q!
@dacianchronolog41045 жыл бұрын
AvE You channel and video are pure edu-taint-ment. Cereal. I'm happy you have this channel and share all these. Thank you sir!
@tomrogers82675 жыл бұрын
Another gold video with all the commentary we look forward to
@t17389z5 жыл бұрын
I just adopted my grandfather's old tools (He's still alive, but at 94 and selling his home, he's not using them anymore) There's a lot of old hard american made tools from the era before chinese imports and I couldn't be happier!
@t17389z5 жыл бұрын
Oh, and I suppose I should say I'm throwing my hat into the ring as well! It would nice to have something to give to my grandkids in some far flung weird cyberfuture.
@briangarrow4485 жыл бұрын
You lucky bastard!!! I got just a few of my dad's tools when he passed away. My elder brother got the wooden custom made carpenters tool chest with inserts made for hand saws, brace and bit, chisels, hammers, etc. And he doesn't even get hard when he drives by a hardware store, like I do. Life ain't skookum
@JBAutomotive7945 жыл бұрын
My Stash of Handed down Grandfather tools were stolen out of my garage while I was at work by a crackhead a few years ago. I really miss the old, all metal Porter Cable Circular saw I cherished and still used...
@johnpossum5565 жыл бұрын
Get an 8 inch fine wire wheel because you're gonna become an expert at removing & keeping rust off them all.
@chrissanders2562 Жыл бұрын
Havent heard from my grandfather in about 15 years but i hope he looks out for me one day.
@ToTheTopCrane5 жыл бұрын
Back in the day, those were referred to as a "monkey wrench", not a spanner wrench. I have a vintage one that belonged to my great grandpa. My grandma has told me that she remembers him using it to repair things. I think it is dated 1890 or close. They were designed to hang onto a square nut or bolt head. Hex wasn't even a twinkle in their eye back then. I think Jody at "Welding Tips and Tricks" can weld water to water.
@wlogue5 жыл бұрын
The oldtimers around here said the proper name was a stillson wrench, also heard them called a ford wrench
@jaredlyman10795 жыл бұрын
Man, gotta love mr hand tool rescues work, and ave’s desire to torture any device in his vicinity
@buzzmong5 жыл бұрын
Bravo for the very subtle Sachs/10 Bullets ref AVE!
@kw98495 жыл бұрын
I've had an ancient British made version of one those in my toolbox for years. It works terrifically well as a wrench, clamp, hammer, or even as a small handheld vise!
Man, I feel sorry for Hand Tool Rescue. He's suddenly going to have a whole lot of orders coming in, right quick in a hurry. Buckle up!
@jrotcjake2 жыл бұрын
Nice work. Love the simplicity of design
@jmh11893 жыл бұрын
Love hand tool rescues channel. Great work and with a side of laughs.
@Phoenix88.5 жыл бұрын
Seeing how you always forget about my birthday this would be a great early gift from my illustrious uncle
@livein3d785 жыл бұрын
Side note , perhaps a test showing new hex nuts vs the old style square nuts , as to why the design changed ect would be a cool vid
@StudioCluiss5 жыл бұрын
Yea ive wonderd why we use hex nuts instead of square. It seems like the less amount of sides you have the less likely it would be to strip.
@Aubreykun5 жыл бұрын
You're "supposed" to use a full box end of the appropriate size which puts even amounts of pressure on all 6 sides/corners of a hex head, and allows for more angles of engagement. Square nuts have advantages that don't necessarily come up often, like being able to put a square nut in a slot so it doesn't turn but is replaceable if the thing strips or wears out, and keeping more of the meat of the flats of an adjustable or open ended wrench on for better leverage. As well they are easier to manufacture.
@apollorobb5 жыл бұрын
I think the biggest reason we don't use the square nuts anymore is machine automation. Square nuts don't have as many flats and therefore are harder to line up in automated machines. For the HAND JOB they would work fine
@16vSciroccoboi5 жыл бұрын
I know I would have hated life with square fasteners before I got wrenches with a 5 degree swing.
@iaincorbett24205 жыл бұрын
I've heard also it's hex over square because you need to turn a hex less to expose new flats than a square head. I think 35 vs 90 degrees
@PilotTed5 жыл бұрын
I love Hand Tool Rescue Channel, it's both funny and awesome.
@nickkk4205 жыл бұрын
This would be the best prize win ever, two if my fav tool channels collab
@evanguarr96785 жыл бұрын
An AvE/HTR crossover episode? YES! I have endless nuts what need turning.
@Ollaris5 жыл бұрын
Keep the marked one! I’ll take the one with the striped out nut. I’ll fix it a’la Hand Tool Rescue
@MrBke585 жыл бұрын
Love the channel! Love the knuckle buster!
@TheSmreeder4 жыл бұрын
I love watching his channel I usually set it at 1.5 speed and let er rip... He gets so detailed ... I wish O could have afforded his power hammer... would absolutely love to have one of his wrenches Many Blessings , SMR
@TexTJ2095 жыл бұрын
AvE and HTR crossover? Hell yeah. I've been using the crap out of my HTR wrench, love it!
@bradzune5 жыл бұрын
Down belowing in the doobly doo. Sick wrench, have always admired it from handtoolrescue.
@seanet13105 жыл бұрын
For anything I would use that old skool design is perfectly usable and looks cool with the design
@wep49685 жыл бұрын
If i'm ever feeling a little down I just grab an AVE vijao and in 10 or 20 minutes I have an impossible grin and the feeling that I've just been blessed by a master. Thanks
@whaleh8er9914 жыл бұрын
Come for the tool review, stay for the colorful commentary. You have me laughing from the moment the video started. New subscriber for life!
@megastarsport5 жыл бұрын
a wrench marked with my two favorite tool guys? yes.
@kgcounts5 жыл бұрын
Seems that acme threads are much tougher than I thought...great to see the scientific approach to testing...you gained a new subscription.
@carldavis82285 жыл бұрын
Excellent test. I bought one from him a while back. I will never put that much torque on it by hand. Good to know it will stand the test of spine.
@morantactical11055 жыл бұрын
I love watching hand tool rescue’s channel. Please pick me for the retro-vintage wrench!!
@goosehunterb5 жыл бұрын
Keep the friggin' thing! It was made for you, I can't take something that don't belong to me!
@8ftbed5 жыл бұрын
First Last With an attitude like that, I guess you're ready for marriage and hang up pick pocketing for a backup career option. It'll work out somehow and don't feel slighted ,having never popped a cherry. 😂😂
@everwoodbuilt5 жыл бұрын
I am very well entertained. Just found your channel. Thanks for the laughs.
@aidanhoffman34105 жыл бұрын
I, being a young machinist and learning more each day, and one of our engineers (they ain’t all so bad, in fact it was he that introduced me to the channel!) are both big fans, and would thoroughly enjoy that fancy antique nut clamp. ❤️
@TheEppicJr5 жыл бұрын
Story of my life in 6 words: Round hole, square peg, big hammer.
@kimber38655 жыл бұрын
The adjustable is being utilized in the correct orientation but the HTR wrench is going weaker orientation.
@thomasalanjensen93754 жыл бұрын
Thats what I was thinking. Want to buy another and test it oriented the other way? The outside corner of the square test chunk was bearing against the tip of the moveable jaw and the base of the fixed. The top jaw then acts like a lever increasing the strain on the nut.
@codylargeteau76584 жыл бұрын
I'm glad I'm not the only one that picked up on him putting the resent wrench in backwards...
@GabeMacDonnell3 жыл бұрын
The HTR's lower jaw is fixed, as opposed to the Wright wrench, so he's using them in their strongest orientations, respectively.
@MrTristans805 жыл бұрын
I just bought one, should ship around December. I can't wait!
@shadow_rusty53535 жыл бұрын
Great trip down memory lane with this one... Reminded me of the King Dick my brother found on the side of the road as kids. Was pretty beat up, but still worked a treat. Thanks heaps for sharing once again.
@Graham_Langley5 жыл бұрын
A friend eventually found one he's lost a few years earlier up in the house guttering. A bit of work with a wire brush and some oil had working fine, if a little rust pitted on the bits that didn't matter.
@jonathantaylor25845 жыл бұрын
A Knipex pliers wrench needs a turn.
@AtimatikArmy5 жыл бұрын
Ouch spendy, but good call!
@fitingsthdown5 жыл бұрын
i love how simple it is. its a beast of a tool
@jerrt5 жыл бұрын
I've been wanting to try that style of wrench. Great video!
@GermanToolReviews5 жыл бұрын
Please test the Hazet 916HP ratchet. It claims to be twice as strong as a standard 1/2" drive ratchet, with a 1000 NM capacity.
@ColtaineCrows5 жыл бұрын
I've had a set of Hazet ratchets, not sure which model they were, but they were the absolute worst shite I've ever used... Apart from that 1/4" kamasa ratchet. Anyway, the sockets and regular spanner/wrenches are nice. Hazet makes a lot of junk.
@sunside793345 жыл бұрын
that would be 737 in derp units if anyone was wondering.
@martinus97555 жыл бұрын
How can they fit 916 horses in something so compact?
@whatyousaidbud5 жыл бұрын
M M must be pretty unSTABLE!
@martinnapotnik98915 жыл бұрын
The thread should be cut like a metric thread, with a 60° angle, than it is self - locking, and it wrench won't unscrew itself.
@nborbust5 жыл бұрын
I am working on restoring a tool kit from my wife's father for my son. This would be a great addition to the kit. cheers.. keep up the great videos
@craig98025 жыл бұрын
As HTR and AvE are my 8th and 14th favorite channels, I'd be honored to conduct some shop shenanigans with a co-branded nut-lathe.
@Joe30pack5 жыл бұрын
There's no bigger compliment than writing a joke or a saying that becomes part of someones vernacular. Maybe an eyes, ears, move your beers t-shirt should be in the works? lol
@halfmoa5 жыл бұрын
I'd buy one!
@Werloxali5 жыл бұрын
Whoever wins the wrench better damn well give it back to AVE.
@WildmanTech5 жыл бұрын
I'd love to have one of those. Love your channel!
@drawvenmusket5 жыл бұрын
that wrench is a great piece of kit that is made well and with love
@dr.rumack76685 жыл бұрын
That c-clamp_micrometer joke is a common thing around the machine shop i work in. LUL
@richardhunter99955 жыл бұрын
At the shop I work in we call bore mics tailpipe expanders.
@allanbrown79295 жыл бұрын
Knuckle busters haven't changed much down through the century's
@kristiaand5 жыл бұрын
love the vids AvE keep up the good work :)
@domesticcanadian5 жыл бұрын
For such a simple tool there are a lot more nuance to this tool than I realized.
@gladiusilluminatus37205 жыл бұрын
So since I still owe my old man a christmas present for last year this would be great. 60+ years and still going. Metal worker and hella fond of old style wrenches. So ill trust my luck and if it comes hard on hard my legal tender. Consider my name on that list.
@thuglincoln76994 жыл бұрын
they're 45 USD now + shipping. At first i thought 45 CAD, and was like, WHOA that's like 6 USD! but no.
@gremlin5910025 жыл бұрын
Amazing little wrench, it'll go right in my daily use kit.
@bnf27224 жыл бұрын
I love your videos. I work on cars with my dad and honestly theres so much about the mechanical world that you help me comprehend. Thank you AvE👍🏼
@VroomBox425 жыл бұрын
Another top notch BOLTR! Btw, “release the Schmoo” is not proper language for happy fun time... well, someone had to try it.
@bldeagle105 жыл бұрын
Ray Romano does some bang up restoration videos!
@jayeff3374 жыл бұрын
I really enjoy your fun times in the shop! If love to be an apprentice, minus the cold! Haha!
@MRSOMTHINBASIC5 жыл бұрын
This channel is awesome lol 🤣 your the man bro... keep up the good work
@surfinbirdify5 жыл бұрын
this would fit perfectly into the toolbox underneath of my other toolbox
@shaughnshea5 жыл бұрын
Look at that Boba Fett Slave1 bespoke cosplay paint job vice grip! Also, I ordered my own from HTR last week, but I wouldn’t cry if you wanted to send the extra one to NH.
@venator6674 жыл бұрын
These videos are great after work with a few beers in your system!
@15buckeye155 жыл бұрын
Great video AVE.
@isaiahconklin59425 жыл бұрын
The way you talk is amazing
@MattsAwesomeStuff5 жыл бұрын
A custom wrench so fine, I wish there's one that's mine. At first I was amped, But then noticed it's stamped. Ich will dieses Schwein (nicht). Keep the crappy one that's got your initials on it, send me the new one you ordered instead, untainted by your shop smegma.
@stevegarmier5634 жыл бұрын
I was trying to see how good these tools are n i found u. I gotta say ur a straight forward guy n i love how u have no censorship about ur comments pretty fucking funny lol. Im definitely gonna watch more.
@splooshybunnys1157785 жыл бұрын
Keep yours I'll take the stripped one! But yeah it was made special for you bud. Love the videos thanks for all the insight. I've been fixing even more broken tools since I started watching.
@chbrules5 жыл бұрын
I love bespoke stuff!
@geis81525 жыл бұрын
Makeup Artist : Hand Tool Rescue. Nice.
@benjaminewing92805 жыл бұрын
Hilarious as always, may your puns always be so grand.
@jack72344 жыл бұрын
second tool i made in metal work first was a hacksaw thanks for bringing back a great memory
@Creativjess5 жыл бұрын
Thank cheesus for uncle bumblefuck, always showing us something new and interesting! ❤️
@dpmakestuff5 жыл бұрын
Yeah I'd use that sucker. Shipping would be cheap too!
@HandToolRescue5 жыл бұрын
I'm right next door!
@hotrodhog21705 жыл бұрын
Hand Tool Rescue!!! Love your channel!
@Grigg35 жыл бұрын
The "crescent" wrench was made by Western Forge, note the small "W F" on the handle. They make them for lots of other tool brands like Martin, Wright, Wilde, Ideal.. and more. They're very good wrenches.
@ryanmccoy21685 жыл бұрын
Been watching for years. Absolutely love your channel. This video got me thinking you should start or or join in a company making old school tools for guys that want to pay for quality and can't find what they need at the antique store. Cockford Ollie has a nice ring to it.
@sourbrothers733 жыл бұрын
0:28 Anybody else notice the dead fly above the screwdriver? Ahh. 15:26 You read my mind, AvE
@Liamtronix5 жыл бұрын
Looks like someone released the shmoo all over a perfectly good vice @11:44
@jakobthomas35875 жыл бұрын
Please an thank you from a poor farm boy!! Love the vids laugh my socks clean off at them!! Keep it up!
@fishfuxors5 жыл бұрын
I'd somehow missed it the first go-round and it didn't matter that I had a mouth full of food when I heard it, but when you said Saskatchewan Socket Set I busted a gut. Best laugh I had all week. Which is sorta sad when you think about it.
@traviswatts13055 жыл бұрын
I want that for my kid. I watch regularly, but just found out he's been secretly watching your channel too. The language doesn't offset the content. He's 12, has helped on 6 engine swaps (always runs the cherry picker), and can do a bit of welding. To much to mention here.
@Gameboygenius5 жыл бұрын
Regarding AvE' s language, I've heard people complain that he's using too much language. Not too much FOUL language, just over-all too much language. Let that sink in, as the faucet said after giving the door a light tappi-tap-tap. I wonder if not much of the complaints actually come from people who just can't navigate their way through the intricate puns mixed with sprinkles of Canuckistani French.
@rickeycallen5 жыл бұрын
I personally dig all of the enginenerding and the depths he goes to explain things. Those who complain are those who cant comprehend that which he spews. I definitely don't understand everything he says, hes got a doctorate for fucks sake, but I do constantly learn something from uncle bumblefuck
@ParRagon-5 жыл бұрын
@@Gameboygenius i like how He mixes the languages, as well as how good He pronounces german words for a canadian :D i love canadians, they excuse themselves if they robb someone xD
@joelground75575 жыл бұрын
There is a video.. lol I think it did more than it was ever intended to do though! Not bad for and old style wrench that was intended for square nuts. And look at it this way, the tool didn’t fail, the thumb screw did. You could remake that in no time and be back in business.
@IanCaine47285 жыл бұрын
That's what I was thinking too. Control the failure mode with the nut threads. I know it was lower energy at breaking, but also prevents catastrophic failure with shrapnel flying everywhere. Oh, sell it for $40 and the nuts for $10. Don't sell the printer, sell the toner....
@johnpossum5565 жыл бұрын
fine threads are stronger, just use those to begin with
@cody-67355 жыл бұрын
Love the channel! Thanks for No BS, No Shill, full of fuckery and fun! Good Stuff!
@johndeerdrew5 жыл бұрын
That would be an amazing prize. It would make a great addition to my toolbox and would probably get all my sons' interest spiked in machining and older tools
@aaronakiyama5 жыл бұрын
You've got me curious now. I'm going to figure out the clamping pressure of those vise-grip style clamps :D EDIT: I tried two different clamps. One with a 3.25" throat and the other with a 10" throat. The max clamping force I could get (while squeezing it shut with my hand) was: 3.25" Throat: 619.2lbf 10" Throat: 173.3lbf SSSSCIENCE!!!
@Lolfml5 жыл бұрын
@@jonWilk8156 you clamp a scale like the one you would weigh yourself with
@jacoobart5 жыл бұрын
I was hoping someone would do just this. Thank you, you've satiated my curiosity.
@peinter920244 жыл бұрын
Thread pitch and oily metal? Grippy emboss? Still viable as early multitool deserving serious respect😀
@aaronakiyama4 жыл бұрын
@@jonWilk8156 hi Jon. I just saw your comment a year later. At the time, I worked at a mechanics of materials lab so I had a calibrated and verified load cell at my disposal
@ErnestoPresso5 жыл бұрын
Disassemble it and the upper part becomes a mini hammer to pair with your mini chainsaw
@STARDRIVE5 жыл бұрын
It also makes for a caliper. Mark the roller, and it's very precise. Until used for anything else....that is.
@lrodpeterson30465 жыл бұрын
Tappy, tap, tap...
@lukewilson6805 жыл бұрын
Love the wrench. Will have to go check it out
@LA6NPA5 жыл бұрын
Love the show! I'll give the wrench a good home at the opera and use it until it's worn out.
@dr.dansgarage5 жыл бұрын
Would an ACME thread be stronger? I'm curious what thread the original wrench had. I'm gonna go buy one from HTR anyway. At the very least it will be useful for removing unwanted knuckle skin.
@CrackpotCreations5 жыл бұрын
I have a couple old ones which use ACME or similar threads, mine also appear to be cast steel as they have a bead running around the perimeter of the tool. Not used them to anywhere near their strength limit, in theory, it should be a stronger design. The main advantage is that ACME has a very aggressive thread pitch so the wrench is quick to adjust. I rarely use them on fasteners, where they shine is bending steel while welding.
@leovishnyak1935 жыл бұрын
“Son of a diddly”
@Chopsbailey5 жыл бұрын
I appreciate the DON'T PANIC you got there.
@ltknhrk5 жыл бұрын
Love your vijeo's... like watching them & learning new stuff! Keep on keepin' on!