Optimize Minn Kota spot lock accuracy with 4 tips

Рет қаралды 55,346

2 ай бұрын

Learn how to make your Minn Kota spot lock more accurate with these four tips.. Improve your spot lock performance with these simple adjustments!
These setting really help you.
If you want to contact me or send me something e-mail me at wildlifeadv@outlook.com
PayPal.Me/WildLifeAdventuresNC
Lake Country Baits
www.lakecountrybaits.com
acccrappiestix.com/
pleases clink my affiliate link below when ordering
betterboat.com/?rfsn=6575161....
We are Better Boat
Better Boat offers a full range of boat cleaning products as well as boat care accessories. We offer everything to keep your vessel looking its best on the water or safely dry-docked. Our products help keep boating enjoyable and prolong the life of your watercraft. With years of testing, and over half a million happy customers, we have proven solutions to your problems. www.hisea.com
15% off with WLA15, site-wide
Hisea website: www.hisea.com/
Hisea Men's Rubber Working Boots: bit.ly/3Uc5sCT
hycolakemagazine.com
If you want to contact me or send me something e-mail me at wildlifeadv@outlook.com
/ @wildlifeadventures-13

Пікірлер: 86

@shanelogan1579 2 ай бұрын

Ive been so frustrated with this problem. Thank you for putting this video together.

@clintevans3886 Ай бұрын

Wow! Gonna give this a try. Thank you for sharing this. I was about ready to give up on spot lock.

@MrJoejones30 2 ай бұрын

Awesome video....thanks allot!!!!! The best of this type I have seen yet!!!

@richardmajewski3815 2 ай бұрын

After having an Ultrex for a few years, this will be helpful as a reminder to check my settings to be sure I'm getting the best performance from my unit. Thanks for sharing.

@nickesping2349 Ай бұрын

After watching your video I went to the lake and did all these steps and now it works perfectly. Thank you.

@tomcole4962 19 күн бұрын

I didn't know any of these even existed! Excited to try it out

@fishman8662 2 ай бұрын

Much needed video for lots of people I believe. Need to do that to mine. It's a pain for sure. Thanks for the tip.

@wildlifeadventures-13 2 ай бұрын

Thank you for watching and your kind words! It means a lot to me.

@FishingLakeCountry 2 ай бұрын

Wow, got to get my trolling motor set for sure. This was a big help Sam. Great video Thanks.

@wildlifeadventures-13 2 ай бұрын

We have discussed this issue quite a few times, hopefully we have solved the problem. Mine was holding me under the bridge the other day!!

@johnpetrea Ай бұрын

Thank You 🙏.. I’ll try it and see how it goes

@randymcdowell2933 2 ай бұрын

Thanks for the info. I’ve been trying to figure out why my Ultrex wasn’t doing what I thought it should for the money it cost. Tried everything but not much luck. Called Minn Kota a couple times about it and talked with a desk guy and no luck. I’ve been sick after spending all that money and had rather have my regular trolling motor. I’m going to try these settings as soon as I get back to the water. Thanks again.🎣🎣🎣🎣

@CaptainDerty 4 күн бұрын

thanks buddy setting up a brand new terrova tomorrow looking forward to it

@jonstokes3122 2 ай бұрын

Great explanation and examples. Thanks for sharing!

@wildlifeadventures-13 2 ай бұрын

Glad you enjoyed it!

@ronturnbull4191 2 ай бұрын

Thank you, I had no idea about this.

@wildlifeadventures-13 2 ай бұрын

I'm glad you found the information helpful!

@anthonywhite7397 2 ай бұрын

Thank u so much sir great info I really needed that

@wildlifeadventures-13 2 ай бұрын

I'm glad you found the information helpful!

@stevejohn2030 7 күн бұрын

I try it thank u

@lesyoung9294 2 ай бұрын

I’ve adjusted a couple things on my Terrova but I’m going to try this on it. Thanks

@wildlifeadventures-13 2 ай бұрын

Have fun!

@chrismcclendon6829 2 ай бұрын

Wow my trolling motor is doing the same thing-thanks a lot!!

@wildlifeadventures-13 2 ай бұрын

I'm glad my video could help you troubleshoot your trolling motor issue!

@brucejarrell5707 2 ай бұрын

Outstanding

@3604x4 2 ай бұрын

Thanks so much!

@wildlifeadventures-13 2 ай бұрын

You're welcome!

@rivercat7345 2 ай бұрын

very good info

@wildlifeadventures-13 2 ай бұрын

Thanks

@cliffordgurley4882 2 ай бұрын

Thank you so much for the advice, I have fighting my trolling motor since I’ve had. I have called Minn-Kota many times and all I got is try this try that to no avail. I went fishing today and set all four settings and it worked perfectly Thank you so much.

@wildlifeadventures-13 2 ай бұрын

That’s awesome!!

@alanaho4915 Ай бұрын

I think it worked?! I made the change from Advance to Legacy and Boat Scale from -1 to -2. Calibration was already done. I did notice a more calmer, relaxed Ultrex trolling motor today. Thank you for the tips!

@wildlifeadventures-13 Ай бұрын

That's awesome to hear! Glad the changes made a difference for you.

@malcolmzoll7613 2 ай бұрын

Thanks for the video

@markingle8980 Ай бұрын

Great info that I never knew!! Thank you! Do you know what software version is install on your ipilot remote?

@wildlifeadventures-13 2 ай бұрын

It is the pro model , if you get one get the the upgrade quad model so you can slow the scanner down.

@backwaterboatrehab 2 ай бұрын

You have any advice to fix problems with iTrack with a Terrova? I record a track, then when I try to troll the track, my trolling motor goes crazy turning left to right like it can’t pick up the course most of the time. I always try to position my boat facing the course and be very close to where it starts.

@small-town-southern-man3573 2 ай бұрын

What model trolling motor is that? And what type mount is that you’re using for the transducer?

@usmarine0352 Ай бұрын

Do you pair the trolling motor with the sensor if it's a 2024 Ulterra and has the sensor built into the motor and doesn't have a separate puck sensor?

@flatpicker75 2 ай бұрын

Great vid. I've done everything but the keel centering. Curious to see if it will improve things. Boat scale was a game changer when I figured it out a couple years back. What LS mount is that? Thanks.

@FreshwaterSouL Ай бұрын

Keel center is the only thing I haven’t done on my unit and I’m gonna try it with the -3’ and see how it performs

@stevejohn2030 7 күн бұрын

Mine comes off!

@martins2746 6 күн бұрын

Hello, I have minn kota powerdrive ipilot 55, but I do not have calibration function on my remoute. How can I calibrate my ipilot ?

@terryschake9440 Ай бұрын

you pushed the check mark and not the plus sign?

@brysonhollar Ай бұрын

How do you like that Livescope turret compared to a manual pole?

@wildlifeadventures-13 Ай бұрын

I like it. It frees up my hands.

@dennismcdonald8133 2 ай бұрын

My ultrex has never worked right when it comes to spot lock. I have done everything but the legacy mode. I will try it.

@wildlifeadventures-13 2 ай бұрын

Try the boat scale too. Thanks for the comment.

@dennismcdonald8133 2 ай бұрын

@@wildlifeadventures-13 I have adjusted the boat scale to -2 before and it does slow down the movement of the boat but the spotlock never holds me anywhere near the spot. Most of the time when I hit the spot lock the motor will take off in some random direction and then over correct when it tries to come back to the spot. I have never been so disappointed in such an expensive purchase.

@wildlifeadventures-13 2 ай бұрын

Make all the changes I talk about. Is there any thing blocking the gps signal, like a 12” live scope screen? I have to keep my unit a little lower on the mount to help with that .

@dennismcdonald8133 2 ай бұрын

@@wildlifeadventures-13 I will try it out the next time I have the boat out. There is nothing blocking the signal.

@hvacguy3512 9 күн бұрын

@@dennismcdonald8133I have a 16ft and I found that Legacy and Scale -2 really helped. Also, making sure I’m at almost 0mph when I hit spot lock.

@ZuhaLivescope Ай бұрын

Hi. i have minn kota micro powerdrive. Do you know how to calibrate the device? the device does not have an on-screen remote control. and I can't find instructions for it in the phone application either. big problem.

@wildlifeadventures-13 Ай бұрын

?? I don't know much about the Powerdrive. Is it blue- toothed to your phone? If so you should be able to find the home screen and then navigate to boat scale.

@henrylewis5877 2 ай бұрын

It seems that you are saying to click the +, but it looks like you are pressing the check ✔️ button?.

@stefangreen-h2e Ай бұрын

When I push spot lock it automatically goes right to a setting of 10? Any idea? Thank you!

@wildlifeadventures-13 Ай бұрын

Do you mean it takes off in high speed?? Did you make all four settings?

@ronknight779 Ай бұрын

What do i use for the boat scale for a 21' fiberglass Ranger bass boat?

@wildlifeadventures-13 Ай бұрын

The factory setting is zero. If the trolling motor seems to strong when it comes on to correct try a -1 or -2.

@ronknight779 Ай бұрын

Thanks

@claywhitten4626 2 ай бұрын

I pilot only I guess. I have the new quest. It doesn't have a remote like that

@wildlifeadventures-13 2 ай бұрын

I am not sure??

@riazwalji3417 28 күн бұрын

Recap: 1. Set Spot-Lock Options to Legacy. Reset Calibration and Reset (from menu) - drive boat in two complete circles. 3. Perform Sensor Offset (Where is Center of Boat); System; Sensor Offset (improves spot lock sensitivity). 4. Boat Scale: System; Boat Scale; + to choose (Alluminum boat is -2).

@wildlifeadventures-13 28 күн бұрын

Yes, correct if you have already calibrated you trolling motor it’s not necessary but it doesn’t take long to do.

@Hawk-iy2iz 2 ай бұрын

With all do respect, let me correct you. Legacy mode will always go to the heading that you locked the unit too so if you drift off, it’s gonna keep going that direction straight line back to that heading advanced has a course and heading and it’s going to keep you on course for that heading so that way you only use one line to the destination. For legacy , as you drift, a new line is created to that point if that makes sense. One thing you didn’t is truly the most important when it comes to your head swinging back and forth the most is the scale option. If you’re in a really tiny boat and your scale is too high that is for compensation because the unit thinks you have a bigger boat and you need to turn down that scale so it doesn’t overthrust when trying to correct itself. Overthrust will cause this action get worse and worse because it shoots off course then has to thrust hard to come back.

@JR-ho5qm Ай бұрын

Very well explained. The latest Minkota with the drift mode feature is fantastic!

@marcuscarmouche9023 Ай бұрын

I have a zxr21 what should my scale be set to?

@robertlivingston1634 2 ай бұрын

Great information but I imagine it's going to take a lot of trial and error for each boat motor combination and style of fishing.

@wildlifeadventures-13 2 ай бұрын

Yes it is, but everyone has the tools to work with now.

@tuiflies5869 2 ай бұрын

Your description about legacy autopilot vs advanced is not accurate. Legacy only corrects your heading for the wind. If you are trolling parallel to a shore with an onshore wind, you will be blown into shore. Advanced will correct your track over the ground so in the same situation you will keep your distance from shore.

@brianmulherin4535 2 ай бұрын

Advanced will try to get you back to your previous course between two points -- an absolute nightmare for trolling. Legacy is the only way to go. If you're getting blown to shore, get more motor. I have yet to hit the Lake Michigan shoreline trolling on Legacy mode, but I have had a spread fouled by the stupidity of advanced trying to get back to an imaginary line.

@wildlifeadventures-13 2 ай бұрын

Thanks for the comment, My main point is that the Legacy is much more forgiving in its correction.

@tommyrq180 Ай бұрын

I’m running an 80 pound Terrova on a 22’ bay boat on Lake Michigan. When fishing shallow, the Terrova is way too overpowered on SpotLock so I’m going to try legacy mode and maybe dial down boat scale a bit and see how it goes. My most important issue is STEALTH. I truly wish MinnKota had a stealth spotlock mode that only gradually corrected with low power. I use my PowerPoles more just because SpotLock is so non-stealthy.

@BradHagler Ай бұрын

My power drive v2 drove itself into another boat. Just turns left or right on its own and at the time I didn’t have a switch setup so couldn’t disconnect it. Hilarious that Minnkota would release a Bluetooth only product with no option for foot pedal. Joke of a company

@sbdude52 2 ай бұрын

Out of focus

@brianpeter7139 Ай бұрын

Very misleading. 3 of your 4 tips have NOTHING to do with spotlock accuracy. Autopilot mode doesn't have anything remotely to do with spot lock at all to start with. Compass callibration and Offset also don't affect spotlock accuracy in the least. They are for the jog feature. They won't make your basic spotlock any more or less accurate in any way.

@wildlifeadventures-13 Ай бұрын

Thanks for the comment.

@trumpking4874 Ай бұрын

Compass calibration has everything to do with spot lock bud. The spot lock runs off gps. Without proper compass calibration your spot lock won’t know where it’s at. That’s how never u hot spot lock it will turn your boat to face into the wind. Try again

@BradHagler Ай бұрын

Spot lock is a joke. Never buying Minnkota again

@billybarnes318 2 ай бұрын

How can you change these setting if your remote doesn’t have the screen like that. I guess I got cheated on the remote.

@wildlifeadventures-13 2 ай бұрын

Did you get a mini Remote? That's what I received when I got Ultrex new. I had to request a big remote and wait two months for it to come.

@billybarnes318 2 ай бұрын

@@wildlifeadventures-13 thank you for the great video and the reply. I’ll get me a request for a different remote. I’ve got to get my spot lock better because it goes bad crazy now.

@Mcfly-rj8yy 2 ай бұрын

Does this work with PowerDrive?

@wildlifeadventures-13 2 ай бұрын

I am not sure about that.

@outdoorsinindianawithdaves9826 2 ай бұрын

If you have ipilot conversion head, yes

@beyondupnorth 29 күн бұрын

@@outdoorsinindianawithdaves9826 without a heading sensor do Mose of the ipilot not work. I didn't realize there was an additional gps sensor when I updated my v1 power drive. So far the heading spot lock and jog function doesn't seem to work. Even though the remote shows the heading in degrees on the remote.