FANATEC ClubSport Tuning Menu Settings Explained + My F1 2018 Settings

Рет қаралды 103,730

5 жыл бұрын

In this video I take you through how to set up all of the Fanatec Tuning Menu settings available on ClubSport Wheels (V1 and V2), explain what each of the settings mean and how they impact realism. I also take you through the settings I use for various games, as a detailed overview of my F1 2018 settings.
Check out our live sim racing streams:
boostedmedia.net/go/watch-onl...
GRAB YOUR FANATEC GEAR HERE:
boostedmedia.net/go/fanatec-w...
MY SIM RACING GEAR:
FANATEC CLUBSPORT FORMULA V2:
boostedmedia.net/go/purchase-...
FANATEC CLUBSPORT WHEEL BASE V2.5:
boostedmedia.net/go/fanatec-c...
FANATEC CLUBSPORT BMW M3 GT2 RACING WHEEL:
boostedmedia.net/go/fanatec-b...
FANATEC CLUBSPORT FORMULA CARBON F1 RACING WHEEL:
boostedmedia.net/go/purchase-...
FANATEC CLUBSPORT PEDALS V3:
boostedmedia.net/go/fanatec-c...
Next Level Racing F-GT (10% Discount with NLR-W10F):
www.pagnianimports.com.au/nex...
Next Level Racing GTTrack (10% Discount with NLR-W10F):
www.pagnianimports.com.au/nex...
Buttkicker Gamer 2:
Grab your Buttkicker Gamer 2 HERE:
US: amzn.to/2VJiMh0
AU: www.pagnianimports.com.au/but...
#Fanatec #ClubSport #Settings #Setup

Пікірлер: 160

@chorseundgrd 4 жыл бұрын

You saved me so much time. I just got my whole club sport elite eco system today and was getting ready to spend hours calibrating. Thank you so much.

@chrisa1160 4 жыл бұрын

Awesome video! Very helpful walkthrough for those of us new to the CSW wheels - especially your insights on how different contexts lead you to push some settings one way or the other. Keep up the great work!

@davidbaez5606 3 жыл бұрын

This is the most detailed and the best review of the settings on a Fanatec wheel. I must say this is my go to video when I first got my wheel. Keep the hard work Will.

@boostedmedia 3 жыл бұрын

Thanks David.

@mik1037 4 жыл бұрын

Thanks, much more detailed then Fanatec's explanation!

@subatfun 4 жыл бұрын

@Boosted Media I want to send a big THANK YOU for this video, I was not enjoying ACC at all and had a hard time setting my CSW up, It changed the whole experience for me in ACC, I understand wheel settings ALOT better.

@MixedRealitySimRacing 5 жыл бұрын

About Constant and Pulse, it's 12 unique positions on both, constant sends the current position constantly, pulse sends it only shortly when the position gets changed.

@dgteague7820 Ай бұрын

Thanks again Will have watched this 40 times and finally got it ty

@miketurco5282 4 жыл бұрын

This video was incredibly helpful! Thank you for a great walkthrough!

@TomGorian 5 жыл бұрын

Great analysis for each setting. Good video

@Scottphoto 4 жыл бұрын

Thanks so much Will, this video has helped to transform my sim racing experience. Brilliant!!

@davidcooper4374 4 жыл бұрын

Brilliant and helpful overview as ever - thanks a lot

@Noob2Gnarly 4 жыл бұрын

Probably the most helpful video on KZfaq. 👌

@003geclipse 4 жыл бұрын

Thank's for posting this video. One thing i noticed is on my drift settings it won't go to negative numbers, 0 is the lowest number.

@olddogg60 4 жыл бұрын

Thanks Will. That explained everything that the manual didn't. 😀

@daviddobson1056 Жыл бұрын

Another great video, Tiptop! Thanks

@jerichan4774 5 жыл бұрын

great work man, thanks a lot

@kbsmithgaming9560 5 жыл бұрын

Great video! Thank you sir

@olddogg60 4 жыл бұрын

Maybe I should just comment ditto to save time. 😊 Excellent review as usual. My Fanatec wheel base will be here tomorrow. 👍

@vadimyakus 4 жыл бұрын

Excellent job! Thank you!

@farshadbagheri 2 жыл бұрын

Fantastic video. Very clear, concise, and easy to follow. A pleasure to watch and I got a lot out of it.

@boostedmedia 2 жыл бұрын

Thanks. Glad it helped :)

@Jua_King 4 жыл бұрын

So far, so good!!!! Thanks a lot.

@vinchybe 4 жыл бұрын

Thank you so much ! A very very usefull video !

@MAnuciao79 3 жыл бұрын

THANK YOU so much! You cant imagine how much it helped!! Cheers! MM

@PremierDin 5 жыл бұрын

Great video very helpfull

@hardonthegasgtboyz1586 4 жыл бұрын

You are the best! and everyone looking at him listen to what he says no one else. I took some advice from another guy. Well remember what Toyota says don’t let strangers in you settings. Kudos.

@johnadam5702 3 жыл бұрын

Thanks for a great video 👍🏻

@yrtracingteam106 5 жыл бұрын

Thanks for the great vid..again! Hope i didnt miss it, was prepping dinner during watching, but maybe a next time would you explain the led-flag settings for the f1 wheels? 😊 Cheers 🚦🏁

@davedontmind 5 жыл бұрын

Regarding the MPS settings In Enc mode, the game sees a rotation to the left as a press and release of one button, and a rotation to the right as a press and release of a different button. In Const and Pulse modes each position is a separate button on the controller: the left-hand switch is button 37 in pos 1 through to button 38 in pos 12, the right-hand switch is button 49 in pos 1 through to button 60 in pos 12. In Const mode, the game sees the button as permanently pressed while the switch is in that position, so if you switch the right hand switch to position 2, the game will see that button 50 is constantly being held down. Move it to position 3 and the game will see that button 50 has been released and now button 51 is being held down. In Pulse mode, as soon as you change the switch to a position the game will see that button pressed and immediately released. e.g. change the right hand switch to position 2 and the game will see button 50 is pressed then released. Hope that helps.

@WarrenKlarenbeek 4 жыл бұрын

Best video on the topic i had ever seen thank you,,, you made it all clear.... keeep up... will YOu make the same video with CSL elite on F1 2019????? SAluti dalla SWitzerland!!

@MauroSerafin18 4 жыл бұрын

Ciao, I used the same settings on the CLS Elite on F1 2019 and they work fantastic! I just raised the in-game Strength to 65.

@ajones7271 5 жыл бұрын

great video, very informative, thank you!

@boostedmedia 5 жыл бұрын

You’re welcome :)

@unusualEmail4u 3 жыл бұрын

I finaly get it. Thanks!

@matk4731 3 жыл бұрын

Thanks mate that helped a lot. 👍👍🙃🙃

@jeffs7098 5 жыл бұрын

Thanks m8!

@reviewforthetube6485 4 жыл бұрын

Great video great ex0lantations man very detailed even kore detailed then fanatec themselves lol thanks buddy I ordered this wheel with my csw v2.5 so this was very much appreciated believe it or not I use f1 wheels for even regular racing the control is insane for me and I never do roil 360 turns in the games I play it's always easy turns up to 180 tops like tops and that's rare so I just like the feel and of course gt cars are great haha

@MauroSerafin18 4 жыл бұрын

Thanks man, now I understand a lot better what every setting does. I have a CLS Elite PS4 and your settings just work perfectly also with F1 2019! I struggled a lot finding the perfect settings but yours are simply perfect, it feels like a new game and way more enjoyable. For anyone else using a CLS I just raised the in-game Strength to 65, to compensate the difference in power between the CLS Elite base and the Clubsport V2.5.

@Datadog-1 3 жыл бұрын

“In AUTO mode the steering wheel decides which mode is appropriate for the game being played. In Encoder mode the MPS simulates two buttons, one when you turn the MPS left and one when you turn the MPS right. In Constant mode, the MPS outputs a constant button signal for each position. In PULSE Mode, the MPS outputs a specific button signal for each position which is only sent as a single pulse when you move the switch.” -Chris Bruney quoting user guide, found in fanatec forums

@xBlackout55x 5 жыл бұрын

Nice bro 🤞

@laurentiurosu683 2 жыл бұрын

Thank you for this. Now playing on f1 2021 and your settings are awsome. I personally like a bit more ffb and lower the fei. Otherwise beautiful settings. Thank you for this and please do one for f1 2021.

@BrainsBush 5 жыл бұрын

Indeed a good informative walktrough. Thx! Would be nice if you could also share your ingame ffb settings for sims like DR2.0, R3E, ACC Also nice simgear! Something on your wishlist? Add a NLRv3 motion. Works perfect!

@boostedmedia 5 жыл бұрын

Yep planning on getting a motion platform as soon as possible.

@diaboles 5 жыл бұрын

thank you the info helps a heep fanatec gear is kinda hard to setup [coming from a T300 wich was plug and play sorta thing] your vid on the brake performance kit also stopped me from snapping the wire in the pedal when I was putting it in fanatec need to hire you to do guides for them :P

@boostedmedia 5 жыл бұрын

Thanks mate. TBH I’ve been trying to get a reply from their sponsorship team for 7 months. But paying for the gear myself gives me the freedom to be completely unbiased with the videos. So I’m not too worried. A DD2 to review would be nice though. Lol.

@mtbross100 4 жыл бұрын

Wondering if any of the settings here have changed for you with F1 2020. Great video and great channel...you've become one of my go-to's as I am in process of moving off Xbox..building first PC now, and just got the Fanatec Formula wheel, base and pedals. Thank you!

@boostedmedia 4 жыл бұрын

Nothing major to change for F1 2020 from 19 :)

@asholiver1071 4 ай бұрын

Without you on the internet we’d all be doomed 😂

@force1_guto_show Жыл бұрын

Man, very cool ! You have the video updated to f1 2023 ? have something changes at codificador ? Mult Functions ? pulse, constant...and others? please help us !

@sandrawheat121 5 жыл бұрын

I've got to tell you, I've spent a lot of time watching all your videos. I own a small computer business. LOL, it supports my Sim Racing. I really enjoyed watching you build your sim rig. I've been doing the same. I ran into some really tricky problems that took at long time to sort out. I've spent around $12,000 with all the trial and error. Just two weeks ago I had to switch out my motherboard, CPU and RAM. My PC has two water cooling loops. CPU is cooled by a Corsair H115i Pro RGB, My Aorus GTX 1080 ti is cooled with a custom water loop that uses 40 oz of water. 6 ft of cooper tubing that is chromed on the out side. over 2 ft in fittings, a full EK GPU water block, a 200 ml Pump/Res combo, a 700 ml Res and a cooper 480 Radiator. 16 Fans, 8 inside the case and 8 out side the case. Might sound like overkill, but I race Project CARS 2 and use three 24" 144Hz LG Monitors. All setting to Max, and fps set to 144 my max CPU temp is 38C and my max GPU temp is 48C.

@boostedmedia 5 жыл бұрын

Awesome! Thanks for watching the videos! Sounds like you should start your own channel!

@taylormuto8907 3 жыл бұрын

This made me so much more comfortable with my purchase. Only question is do the in-game settings work in F1 2020 as wel

@atticracing7965 4 жыл бұрын

Can you put your numbers in the description or something

@albertforster1915 5 жыл бұрын

Hi Will, now that you have started using iracing, how close do the settings you described for F1 2018 transfer over to iracing, I have a BMW wheel & 2.5 wheelbase but still, after 9 months usage, I still haven't found the sweet spot in iracing (I only use iracing)

@slowinfastout3304 3 жыл бұрын

Great Video as usual 😎 What tuning settings are best to feel oversteer / losing the back end? THANK YOU 🙏

@Adrian-wu6jo 5 жыл бұрын

@Boosted Media do you have setup for dirt rally 2.0 ? For the wheel and in game settings. Thank you in advance.

@reviewforthetube6485 4 жыл бұрын

I loke it at 360 but great stuff man

@davewatson7650 Жыл бұрын

When you use the set button 1,2,3 etc does it remember the wheel button settings as well? Thanks, Dave

@jphillips5346 4 жыл бұрын

Just received this set up last week for Xbox One F1 2019 have updated firmware drivers cannot figure out why rev lights won't work on wheelbase CSL Elite and a V2 wheel rev lights not working? Thanks for any input.

@gregpugliese 5 жыл бұрын

For anyone who has this same wheel rim, the Formula V2: even when I set SHO to 0, I still get noticeable vibration in the hand grips, whereas I would expect it to turn off completely (and correspondingly, when I turn it up to 100, there's no noticeable change). Is this how it's working on your rim too?

@GayPrideHD 4 жыл бұрын

Can you make one of these videos for the NASCAR vehicles? I use the universal hub with my v2.5 base

@bleavit 5 жыл бұрын

My understanding of the encoder and pulse settings is that in encoder mode the rotary switch is effectively 2 buttons, one up and one down no matter the actual switch position. In pulse mode each switch position is a different button, but instead of a constant button press it only sends a pulse when you select a switch position as if you pressed and released a button. I had an issue trying to set buttons in ACC that it would immediately set the function to button 38 because of the constant button press. I had to set it to pulse so that the game would not always see that a button was pressed and held.

@boostedmedia 5 жыл бұрын

Yep I think you’re correct. I just didn’t want to state it a video when I didn’t have confirmation from FANATEC.

@mikesalas1990 4 жыл бұрын

I know this is old but if you change the degree of rotation in game(f1) I'm pretty sure the wheel in game will also match your wheel..

@miketurco5282 4 жыл бұрын

I'm having an issue in Assetto Corsa where mid-corner the wheel get's super heavy and wants to rip itself back to center. I can't seem to narrow down which setting to correct. Any advise would be highly appreciated. I don't seem to be having the same issue in AC Comp. Asstto original is especially touchy.

@SackyX 4 жыл бұрын

Great video, thanks! Hey do you have any idea why 2019 has micro pauses during gameplay?

@boostedmedia 4 жыл бұрын

It’s a very common issue I’m afraid. Seems to be caused by spikes in CPU load but Ive never found a fix. Doesn’t happen on my 9900k machine but used to be really bad on my 8700k.

@knightrida6829 Жыл бұрын

Big help ,does the McLaren and new bmw p1 wheels have abs setting ?

@Mucchio22 4 жыл бұрын

what settings do you put in the properties of the steering wheel? I have a problem since a few weeks that the steering wheel does not respond well .. it is not accurate in turning !!

@brianwalsh7863 2 жыл бұрын

What does button 22 do? Middle switch on the formula wheel, can't find info anywhere!!!

@BLITZKRIEG1 3 жыл бұрын

could you do one on the current DD bases?

@theomakriyannis Жыл бұрын

I have the GT DD pro with V3 pedals. For some reason there isnt an ABS option setting adjust when the brake pedal rumble comes on. Any else have this issue?

@paulf462 Жыл бұрын

Why is it so hard to find videos like this? This is amazing except I have the McLaren GT3 V2 and it's 5 years later. My tuning menu looks a bit different obviously, but I can't find anything else out there that goes through it like this. Do you by chance have an updated video?

@abu1950 3 жыл бұрын

Hello mate what is that phone holder called? Do you install by removing the screws on the v2.5 hub and then re-screwing them with the holder?

@mads835 4 жыл бұрын

Do you know if the f1 2018 ingame settings also works with f1 2019 and f1 2020?

@JasonRenfrow 4 жыл бұрын

Are these break settings only for v3 pedals? What about csl elite pedals? Do the pedals have to be connectors the wheel?

@rafaelrosolem4955 3 жыл бұрын

This is very useful and well explained. Thanks! I wonder whether you've made any changes in both settings (wheel and in-game) for F1 2020? It would be very helpful to know. Any suggestions?

@boostedmedia 3 жыл бұрын

Nope still the same.

@rafaelrosolem4955 3 жыл бұрын

@@boostedmedia Awesome! Very helpful and thanks for the video!

@ruffrider6653 5 жыл бұрын

Just be aware that when you update the firmware on your wheels - it erases your settings. So you need to use some method to preserve your settings independent of the wheel.

@JasonRenfrow 4 жыл бұрын

Csl sensitivity only goes to 109. How can I adjust to make for tighter turn in?

@Fbarbarotto 2 жыл бұрын

Hi can you advise how come my wheel is not ratio 1 to 1 is it something I need to do with tuning on computer

@specscheck952 2 жыл бұрын

BRF is different waY around on my same wheel lower BRF the more brake it does and higher i have to really really press it to get to blue lights when i press

@Antonio.1225 3 жыл бұрын

my formula v2 has some different seetins, or somethings have changed since this video, like the order of settings, the brake abs is now called "BRK.LVL", and the fact that i dont have "BRAKEF"

@moroleonaers5479 2 жыл бұрын

What about the encoder in the middle of that formula wheel? It has position From A to D, what is that for? Thank you for the informative video

@boostedmedia 2 жыл бұрын

Switches modes for the Advanced Paddle Module if fitted.

@RiccardoMalossi 4 жыл бұрын

Is it possible to map those central knobs also on Xbox One?

@previt532 Жыл бұрын

hi guys i have same volant but different base and feedback doesnt work what i should do ?

@VK-dt7hn 4 жыл бұрын

hi boosted, im just wondeirng about how you fitted your display with the rev counter? I want to do an similuar setup with the rev panel, how many inches is the display? 8 or 10? how have you mounted it on the clubsport base? love your content!

@boostedmedia 4 жыл бұрын

It was a mount I printed from s file in thingiverse. Was a 6inch display

@petertown9467 4 жыл бұрын

I dont have a drift mode is this something new? ive got the DD1

@paulmah7941 Жыл бұрын

You cannot set each rotary switch's mode independantly ?

@JH-in9zu 3 жыл бұрын

My sensitivity only goes btw 0-110 on clubsport F1 wheel Can't turn around corners Please help

@DxBang3D 2 жыл бұрын

What is the "DRIFT" setting called today?

@momorious 5 жыл бұрын

Nice and informative video! Few notes: Sen is not going down to 9, its going down to 90 minimum (so 45° in each direction). Spr is not working in F1 2018 - its actually not working in any game on PC afaik. Dpr is directly related to the Wheel Damper Setting in F1 2018. Pulse means you have 24 different buttons (12 buttons for each MPS) to configure and the wheel sends a short pulse signal instead of a constantly pressed signal. For example you can map your Black Boxes in Iracing to them and Position 4 would then for example mean Black Box F4. Vibration and Force Feedback Strength is recommended to set to 75 which is pretty much the maximum point to not get clipping. Understeer effect in my opinion is totally unrealistic and should definetely set to off... ^^ Totally distracts me..

@boostedmedia 5 жыл бұрын

Ahh makes sense regarding Pulse. Thanks!

@c2008master 3 жыл бұрын

i ordered myself a fanatec with the same wheel f1 carbon v2 but a question what kind of pedals are you using with the ffb??

@Costiii 3 жыл бұрын

He is using Clubsport V3 pedals in the video.

@Cantquit2 5 жыл бұрын

Do you have also a recommendation for F1 2019. Is it the same?

@boostedmedia 5 жыл бұрын

Same one works for now.

@RaxMD 4 жыл бұрын

Hello !!, can you please tell me if the rotary encoders in the center of the wheel are endless rotation??

@boostedmedia 4 жыл бұрын

Yes they are :)

@RaxMD 4 жыл бұрын

@@boostedmedia thank you very much !! I am thinking to change my new gt3 fanatec porshe wheel for this one, due i race in vr and it is imposible to me reach the buttons in blind mode jeje, they are very separated... what do you think about it?, is this a good wheel for vr? It is confortable?, i am worry by the 27cm size, but honestly i feel the 32cm wheel a little big to me in corners due i came from a Logitech wheel.

@reviewforthetube6485 4 жыл бұрын

You have the brake force backwards tbe lower you put it the less pressure it takes the more you turn it up the harder it is to push

@boostedmedia 4 жыл бұрын

Yeah you’re right. They changed it in the next firmware update after I made this video. It used to be the opposite to what it is now.

@reviewforthetube6485 4 жыл бұрын

@@boostedmedia they wwre never that way lol it was explaine dhwen it was released with thise settings how to do it mabye your druver was messed up it happens thats the one thing I hate about dnastrc drivers and uodates you can do the same update 5 times and esch time soenthign different can happen lol

@dobsonmartin 3 жыл бұрын

My PS4 Pdoium F1 wheel’s Break Force setting is backwards of yours. Lower number requires less pressure, higher number equals more pressure. Perhaps it’s just the newer software (as this post is a year after you made this video)?

@boostedmedia 3 жыл бұрын

Yep it reversed back around v350 drivers about a year ago.

@dobsonmartin 3 жыл бұрын

@@boostedmedia Right on, thanks Will

@GustavoSantos-gz7uj 11 ай бұрын

Why doesn't my F1 V2.5 have all the same settings ?

$@neffracing5133$

@neffracing5133 5 жыл бұрын

I have the csw v2 and the v3 pedals i dont have all those settings available to me in the menue?

@boostedmedia 5 жыл бұрын

Are your pedals connected to the wheelbase or via USB? Firmware up to date?

@magzire 5 жыл бұрын

I have the clubsport v2 and v3 pedals. I don't have the brake fade option. Is this only a 2.5 feature?

@momorious 5 жыл бұрын

Brf is only available when you connect the Pedals directly to the wheel base and not via USB.

@boostedmedia 5 жыл бұрын

This^

@alfonsoberettini7013 3 жыл бұрын

Qualche vidieo con istruzioni xil setting di questo volante in n esiste???

@gsrcannell3769 5 жыл бұрын

Hey great channel and content. can i ask is getting a f1 wheel benifical as i have the bmw gt2 wheel and thinking of getting the f1 2019 limited edition rim or not really? many thanks

@boostedmedia 5 жыл бұрын

That’s a tough one. The F1 wheel has a smaller diameter which makes quick adjustments easier. Plus the additional buttons are invaluable if you want to be able to change your ERS/Fuel while driving. Ultimately it comes down to cost but I’d definitely recommend it!

@gsrcannell3769 5 жыл бұрын

Boosted Media thank you I'm on the fanatec site as you replied argh I can't make my mind up lol I think I will as the BMW rim is but to big for f1 2018 thanks so much for your help. And I watched your vids before moving to fanatec only got my setup 2 months ago

@boostedmedia 5 жыл бұрын

Haha. If you have the cash you won’t regret it. ;)

@gsrcannell3769 5 жыл бұрын

Thank you kinda what I needed to hear just ordered thanks bud. I'm just trying to set the brake pedal up on v3 after seeing this vid as I have mine plugged into the pc recommend by friends but your braking is so smooth where I'm badly struggling to stop the car. Been sharing your vids with loads of friends keep it up bud great channel and great help thank you

@fontel69 5 жыл бұрын

Where did you get the phone holder you are using?

@boostedmedia 5 жыл бұрын

I 3D printed it

@CaptKickButt 5 жыл бұрын

What udp dashboard are you using?

@boostedmedia 5 жыл бұрын

I made a guide here: kzfaq.info/get/bejne/ipd0rZlhmNulhmg.html

@stijnrousch4319 4 жыл бұрын

What frame are you using?

@boostedmedia 4 жыл бұрын

Jsut a 3D printed one I downloaded off thingiverse

@Pustul 2 жыл бұрын

13:25 it’s funny because, according to Fanatec, Spring has no effect in Codemaster F1 games.

@Ors180717 5 жыл бұрын

I cannot map a lot of buttons to my f1 2018 in ps4. Is it not fully compatible? I can only use the regular buttons, and the game just doesn’t recognize the rottary switches, the encoders, the extra paddles from the podium advanced paddles and some other stuff Please helpppp

@boostedmedia 5 жыл бұрын

It’s not fully compatible with PS4. This is explained in the manual.

@Ors180717 5 жыл бұрын

Yeah i just figured out 😕 But for f1 2019 it will be fully compatible! Except for the upper paddles in the advanced paddle module for the moment. I hope the make an update and make them compatible