Zanussi washing machine bearings replacement, full process and test.

No video

Zanussi washing machine bearings replacement, full process and test.

Рет қаралды 5,200

Күн бұрын

Model Jetsystem+ 8kg 1400 ZWJ14591w
Is your washing machine noisy on the spin? Too loud? Here's how to fix it.
The kit cost about £30 on the internet. See my affiliate link below
This process is similar on Tricity Bendix, Aeg and other machines.
Join this channel to get access to perks:
/ @bootsowen
If you found this video helpful you might like to:
Donate: paypal.me/bootsowen
Support: / bootsowen
www.amazon.co....
You can buy tools and parts, or things you were going to buy anyway from Amazon through the affiliate program (links below) and I may receive a commission for the sale. :
Bearing kit (Check model) amzn.to/2FXEE5B
Ecover laundry liquid: amzn.to/2Fl3Jqx
Calgon: amzn.to/33es6hL
Vacuum Cleaner: amzn.to/35lsAFr
or you can buy anything else through the link. This has no effect on the price for you. The links used are affiliate links. As an Amazon Associate I earn from qualifying purchases.

Пікірлер: 22

@djdrunkenmonkey2 3 ай бұрын

from someone that used to fix machines as my main job, well done!! newer zanussis have a sealed drum so are scrap if the bearings go

@bootsowen 3 ай бұрын

Cheers buddy. It is hardly worth it, but it was a mates machine!

@djdrunkenmonkey2 3 ай бұрын

@@bootsowen these machines are fixable, & much better than zanussi current range is

@WSHLNd120 3 ай бұрын

@@djdrunkenmonkey2indeed. My grandma has a John Lewis Electrolux washing machine that's about 14 years old now and the bearings have completely killed themselves and its a whole new tub. I've seen videos of people cutting the drums in half and replacing them, it would be cool to try. When done properly I believe it can work but it would come down to how confident you would feel using it as long as it doesn't leak.

@WSHLNd120 3 ай бұрын

Sealed tubs are an environmental disaster and such a waste. Surprised to see this Zanussi had a splittable drum.

@DimaKirivel 2 ай бұрын

@@WSHLNd120If you use enough bolts and nuts and use a proper sealant it won't leak. It's a common practice in Eastern Europe

@dayo-racings 2 ай бұрын

Hi.. I've just carried out my first replacement of bearings to a Zanussi washing machine, thank you. worked a dream, and lots of Brownie points from my wife 😂😂😂

@romservice-t5n 3 ай бұрын

When you knock the drum out of the tank, tighten the pulley bolt so as not to damage the end of the crosspiece

@washing_machine_guy 3 ай бұрын

One of my favourite machines. I believe it’s 12-13 years old

@bootsowen 3 ай бұрын

Sounds about right!

@washboss9119 3 ай бұрын

After i had this much trouble with my wma i definitely wont bother again i see why people just get a new one these days 😂

@WSHLNd120 3 ай бұрын

Well it all comes down to a throwaway society really. If you have a couple hours here and there you can easily do this job, it's for everyone but if your handy with tools and like to fix not replace then a task like this is definitely worth it.

@ebikescrapper3925 3 ай бұрын

Copper prices are good, cash in while you can. Great video as always

@bensclassicbodywork 2 ай бұрын

Brilliant video, thanks very much

@callumdisdale829 3 ай бұрын

Hi Owen I like your washing machines

@GeniusSL 3 ай бұрын

Now these bearings were brutally murdered, holy shit. 🤣Well done, these machines are pretty good and repairable! So absolutely worth it. What helps me to pull the drum shaft through the new bearings is to put on the pulley and tighten the screw, this pulls the drum in quite easily. Might have to loosen the screw a bit and re-position the pulley though. Also, the machines with the recirculation pump don't have a ball in the sump hose.