BOSCH GCM12SD Glide Miter Saw Adjustment / Setup
Рет қаралды 116,999
Күн бұрынThe Bosch 12" Glide Miter Saw is a space saving beast!!! Right out of the box this saw was not even close to useable though. Featuring Bosch's Axial Glide System instead of traditional rails, this saw has a look and feel like none I've ever used before. Here's an in depth video about how to make all the adjustments so your saw cuts perfectly. This is the same process for any miter saw but the adjustment screws will be located in different areas. The GCM 12SD has a 12" blade but also comes in a 10" which is the CM10GD. Links to both and all the tools required below! Also look for timestamps below as well as a bunch of other great resources.
Previous video showing the unboxing and setup of the saw • BOSCH GSM12SD Glide Mi...
Timestamps:
0:00 Intro
1:06 Tools needed
3:40 Remove Guard
4:03 Test cut
4:32 Adjust main square cut
10:03 Adjust vertical bevel
13:44 Adjust 45 degree bevels
16:08 Blade guard and blade change
16:39 Axial glide knuckle adjustment
17:43 test cuts
17:57 Set pointers
18:41 Wrap up
LINKS TO TOOLS FROM THIS VIDEO!
Bosch 12" Glide Saw amzn.to/34rJ0Lo
The 10" version amzn.to/3oplUNr
Combination Square amzn.to/3kvRy9L
Speed Square amzn.to/3dUab4R
Allen Wrench Set amzn.to/2FX41UU
Socket Set amzn.to/2HrP9ii
Open End Wrenches amzn.to/31BHPHF
Screwdriver Set amzn.to/37H5DxA
⭐ SUBSCRIBE for more free videos by clicking this link! ⭐
🔔 Click the bell next to the subscribe button for notifications when I release new videos! 🔔
kzfaq.info...
😀 I appreciate you taking the time to read the description! Please leave me a comment. I try to read all of them and respond to everyone!
Keep scrolling for more info and to see other ways you can give me feedback and help support this channel...👇
~~BUSINESS LINKS~~
WEBSITE www.borsellinocarpentry.com
BLOG borsellinocarpentry.com/blog
EMAIL LIST www.borsellinocarpentry.com/e...
FACEBOOK / borsellinocarpentry11
~~PERSONAL LINKS~~
WEBSITE www.nickborsellino.com
KZfaq CHANNEL “Level Up Your Life” / nickborsellino
~~SUPPORT~
☕ BUY ME A COFFEE! ☕ www.buymeacoffee.com/nickbors...
MERCH - Shirts & Mugs teespring.com/stores/borselli...
PATREON FAN CLUB / borsellinocarpentry
~~TOOLS~~
🔨 Want to see some my favorite tools? Check out my website for the full list!
○ BUSINESS WEBSITE TOOLS PAGE! www.BorsellinoCarpentry.com/t...
○ My favorite saw blades! amzn.to/2YnpNav
○ The best hammer! amzn.to/2QjR88Z
○ The ONLY tape measure and utility blade I use! amzn.to/2FIPqvM
○ Awesome polarized safety sunglasses 🕶 amzn.to/3fuXM78
○ Shop Table Saw amzn.to/35cAnVz
○ Jobsite Table Saw amzn.to/32o1Jq4
○ 48” Level amzn.to/3o03a6A
~~CAMERA GEAR~~
🎥 Interested in the gear I use to make videos? There's a full list on my personal website.
○ PERSONAL WEBSITE TECH PAGE! nickborsellino.com/tech/
○ Main camera amzn.to/3s0qN0n
○ GoPro amzn.to/3dtiwhR
○ Wireless mic system amzn.to/3jPIKvU
~~ADORAMA~~
I also buy a lot of gear from Adorama. They have great prices, fast shipping and great customer service. They sell all sorts of electronic equipment. Photography, Computers, Video, Audio, Home Electronics, Musical Instruments, Drones and MORE! adorama.rfvk.net/e96kO
~~TUBEBUDDY~~
Are you a KZfaqr too?! Grow your channel with TubeBuddy! It has helped me tremendously! www.tubebuddy.com/borsellinoc...
Disclosure: I get commissions for purchases made through links in this post.
Some of these links go to my websites and some are affiliate links to other sites where I'll earn a small commission if you make a purchase at no additional cost to you. As an Amazon Associate I earn from qualifying purchases.
Borsellino Carpentry is a construction company located in Upstate New York. I specialize in small residential remodeling jobs. This channel is dedicated to teaching other contractors, carpenters, small business owners, DIYers, weekend warriors and anyone else who just wants to learn a little bit about home improvement. The full name of the company is actually Borsellino Carpentry & Home Repair, LLC but that is just too much of a mouthful! I also do tool reviews, business tips and other contractor related videos on this channel. In the wintertime I even do snow plowing videos. I try to mix it up and show all the parts of the contracting job, not just the glorious finished product. Please leave me a comment and let me know if there's any specific topics or jobs you'd like me to cover. Thanks for watching! 👋😃
#bosch #glidemitersaw #gcm12sd
@BorsellinoHomeServices 3 жыл бұрын
😎If you like this video please SUBSCRIBE! and check out my other similar videos!👍 kzfaq.info
@robotstonka7118 Жыл бұрын
Nice work man, but what about adjusting the laser?
@BorsellinoHomeServices Жыл бұрын
@@robotstonka7118 mine doesn't have a laser
@robotstonka7118 Жыл бұрын
@Borsellino Home Services oh sorry, I had no idea they were making them without the laser. 👍
@errol6788 Ай бұрын
Love the BOSCH saw, and loved the very detailed explanation of how to set or adjust the saw. Will be getting this along with the mobile stand. Will convince both my wife and daughter to get me the stand first for FATHERS day, and get the saw by myself. You sir just earned a sub and a like. Love how you your time, and were very patient with making those infinite adjustments. This video is added to my playlist. I will be reverting to this particular video to make my adjustments once I get it. Very well down sir, I will be back for more of your videos in the future. Thank you for this.
@hmmm1309 3 жыл бұрын
Just bought this saw, got it out of the box and attached it to the fold up table. Next job is to set up the blade. This very timely and down to earth video should save me plenty of time and headaches. Thanks.
@BorsellinoHomeServices 3 жыл бұрын
Awesome! Just take your time and be patient and it should all go just fine! You can always tweak it again later if you find something off once you start using it too...
@snitgu 5 ай бұрын
I bought a used saw without a manual. This video did a great job showing me how to tune up the saw and where the adjustments were in a clear concise manner. Well done!
@BorsellinoHomeServices 3 ай бұрын
Glad it helped!
@drpete3 3 ай бұрын
Same with me
@sperreault 2 жыл бұрын
Thank you for the video! imo - the easiest way to check for main square cut is to get a reasonably sized piece of wood and cut it and check it using your square. And then flip it over and cut again and check for square. That seemed to do the best for me. Also, thank you for trying different ways to show how to make it square. Hope it helps others. Finally, thanks for not editing your video to make it look easy - while it's not terribly difficult, there is a lot of tweaking here and there to get it perfect.
@BorsellinoHomeServices 2 жыл бұрын
thanks for the feedback! Someone else recommended a digital angle finder that is magnetic and attached to the sawblade. I'm going to have to pick one up and try that out in the future for the bevel cuts. It's definitely a lot of small tweaks back and forth. A little too far one way, not far enough, then too far, over and over. hahaha.
@sperreault 2 жыл бұрын
@@BorsellinoHomeServices Crap! I wish I saw that post. I actually have one of those lol.
@gordong.9521 3 жыл бұрын
OMG! You are the only one being able to explain all the necessary steps in one cool video! I am German and after wasting so much time, I finally stumbled upon this!!! Thank you so much and all the best wishes to you
@BorsellinoHomeServices 3 жыл бұрын
Thanks Gordon!!! I appreciate the kind feedback!!! 😊
@SimplyBlake1992 3 жыл бұрын
You're a wonderful human being for making this video. I have a huge issue with my saw being out of square and this helped so much!
@BorsellinoHomeServices 3 жыл бұрын
Thank you! I'm glad it was helpful! I hope you were able to get it all squared away. 😂😃😆 hahaha....squared away.....
@robertlentempest512 6 ай бұрын
Just got “the saw” when I unboxed you provided me a “plan”, approach and metnod - thanks so much
@btyng3678 9 ай бұрын
Great video. You show the true exercise truing up a miter saw requires. Its not easy. Thanks again
@hiendo5846 Жыл бұрын
Got frustrated with this mitre saw after some time. Finally this excellent video got the saw cut square and true. Heaps of thanks from Down Under🙏🙏🙏🙏🙏🙏
@BorsellinoHomeServices Жыл бұрын
AWESOME!!!!!! Glad it was helpful! Can't say I love the saw but it cuts okay. My old DeWalt seemed to be more accurate but it was broken and needed to be replaced and this is what I got
@NeverTakeNoShortcuts 3 жыл бұрын
I think you are angling for a job as a Bosch video teacher. Great job!! No bs, just
@BorsellinoHomeServices 3 жыл бұрын
LOL That wouldn't be a bad gig! Bosch, if you're watching out there, hit me up!!! 😏
@dancin4 3 жыл бұрын
Great straight forward adjustment guide. I really like all the comments on the saw too.
@BorsellinoHomeServices 3 жыл бұрын
Thanks for the feedback! A bunch of people have said I didn't do the 45 adjustments clear enough so I hope you can figure it out!
@brucegibson8053 2 жыл бұрын
Great job on the instructions. Much better than the booklet they sent with the saw. Made tuning mine up so much easier. Thanks again.
@BorsellinoHomeServices 2 жыл бұрын
Nice! I'm glad it was helpful, thanks for letting me know!
@fredfloyd6957 Жыл бұрын
My saw arrived with the adjustment bolts on the back of the saw tightened down. No way to bevel. You showed the quick adjustment and now the bevel mechanism works as it should. Thank You!!!
@BorsellinoHomeServices Жыл бұрын
Awesome! Glad it was helpful!
@christianschink6883 Жыл бұрын
Thank you for posting this video. I bought the saw about a year ago and was naive in thinking Bosch would have set it up decently upon delivery, given the price point of the item. Boy was I wrong... Had to bodge a few mitres just now, was fed up with angles being off and found your video.
@BorsellinoHomeServices Жыл бұрын
oh yeah always gotta set up new equipment. This saw was SOOOOO BAD when i bought it
@dawidtarabasz4106 Жыл бұрын
This video is a great help.. i have same bosh model and same issues.. miter saw is brilliant in a way however must be precisely adjusted and here you are coming with your great tutorial!! Cheers
@BorsellinoHomeServices Жыл бұрын
lol thank you! I still think the saw has flaws and doesn't cut to my satisfaction. Nothing like a tried and true rail system
@ATopDesignWoodworking 2 жыл бұрын
Great video! Had mine for few years but always had to adjust it at the knobs. Now time to tune it properly
@BorsellinoHomeServices 2 жыл бұрын
awesome! Glad it was helpful!
@MikeJones-xf2qh 2 жыл бұрын
Exactly what I needed. I have the same model and was dumb enough to assume it was cutting square. Thanks for the video!
@BorsellinoHomeServices 2 жыл бұрын
Awesome! Well, not awesome that it doesn't come square.... awesome that it was helpful!
@hansoloman Жыл бұрын
This is truly the best video of the adjustment for the Bosch 12 GDL! Big thanks I will do it soon on my one, too
@BorsellinoHomeServices Жыл бұрын
thank you! I've had a couple complaints about it but mostly positive feedback. Hope it helps!
@johndoe_007 2 жыл бұрын
I've been looking for how to adjust this saw for years. Thanks mate that's super helpful
@BorsellinoHomeServices 2 жыл бұрын
awesome!!! Hopefully you get it nice and square now!
@matthewehansen Жыл бұрын
Great video - my GCM12SD is running true now. Out of the box it was way way off and always I had to make small adjustments manually to get it to cut decent every time. Now with the stops and detents set, this should save a ton of time!
@BorsellinoHomeServices Жыл бұрын
Awesome! Glad this was helpful!
@mkbcoolman 3 жыл бұрын
I have this exact miter saw. Amazing tutorial brother! This will save me a lot of time tuning it up later today.
@BorsellinoHomeServices 3 жыл бұрын
SWEET! How do you like it? I haven't really used mine much and I'm finding it hard to get used to and I'm not terribly pleased with the accuracy of the cuts. Like when I make a 45 degree bevel it makes a curve in the bevel so only the center of the board touches the other miter. It is so weird!
@willtix6301 3 жыл бұрын
So howdo you like it??
@mo.ripples 2 жыл бұрын
@@BorsellinoHomeServices hmmm. Have you had problems with blade wobble? I hear that’s not uncommon for 12 inch blades. I used the classic dealt 12 inch for years with out that issue. I’ve used this saw for like 2 years now but not all the time and I notice that problem sometimes but not all the time. I figured it was operator error lol.
@BorsellinoHomeServices 2 жыл бұрын
@@mo.ripples YES! I don't think it's operator error. I have issues with wobble on the 12" blade and honestly, I) wish I bought the 10" version instead of this monster.... I still might buy it and "downgrade". I came from the DWS 782 which was an amazing saw but started having some blade wobble after my dog knocked over my saw on the stand... DOH
@JF0913 3 жыл бұрын
Thanks for making this simple because of you I was able to adjust my saw as well. 🙌
@BorsellinoHomeServices 3 жыл бұрын
Whoop Whoop!!! Glad it was helpful!
@YoupiePlaat 7 ай бұрын
I ordered this Bosch today and will definitely check this out thanks for this useful explanation.
@debbieeckels25 3 жыл бұрын
I just bought one of these. I appreciated your video very much. Thanks for the demonstration.
@BorsellinoHomeServices 3 жыл бұрын
absolutely! hope this helps!!!
@lawrencecasaus4574 6 ай бұрын
Awesome demonstration I showed it to my Construction class and we ALL got some great tips.
@BorsellinoHomeServices 6 ай бұрын
Awesome! Thank you!
@jonathana349 3 жыл бұрын
This was so incredibly clear and helpful. Thank you so much
@BorsellinoHomeServices 3 жыл бұрын
You are very welcome!!!
@Jim-xf7se 3 жыл бұрын
Excellent video. I really appreciate you making this. It's going to help me adjust my saw. Thanks again!
@BorsellinoHomeServices 3 жыл бұрын
hope it is helpful!
@acedanger49 21 күн бұрын
Great video. Thanks for taking the time to record it.
@DialMforDavid Жыл бұрын
Thanks so much for a great video - I had been putting this off with this saw - thanks to your easy to follow instructions it made it a breeze.
@BorsellinoHomeServices Жыл бұрын
You're welcome! I set mine up once and it's stayed pretty much perfect since
@danielgonthier6973 Жыл бұрын
I have the Bosch GCM 12 GDL with the same problems, very grateful to you for the good explanation. I hope I can fix it. Keep it up. Regards from Chile.
@BorsellinoHomeServices Жыл бұрын
You're welcome! I really hope this helps!
@Heineken023 2 жыл бұрын
Just bought this saw today and really appreciate the tutorial. Legend cheers!!!
@BorsellinoHomeServices Жыл бұрын
Thanks! I didn't like the saw at first but it is growing on me
@Applewoodscientific 3 жыл бұрын
Thanks for showing me how to adjust the lock from the rear of the saw. The wing was so tight it interfered with wide boards, now I can adjust it so that it is below the top!
@BorsellinoHomeServices 3 жыл бұрын
Awesome! I'm glad it was helpful!!!
@donnyhicks9282 3 жыл бұрын
Thanks for confirming this process. Love this saw.
@BorsellinoHomeServices 3 жыл бұрын
No problem. I'm glad to hear you love it! I honestly haven't used it much cause I've got my business on hold for plow season. I don't bother with the construction in the winter here cause I hate working in the snow. I'll be using it a lot more soon though!
@PatrickPeterSchwarz 6 ай бұрын
Thanks from germany. Good job. You made my day!
@ayellowbeard 10 ай бұрын
I have a 12" Dewalt slider which I absolutely love and while it's a great jobsite saw the slide takes up a lot of space when in my shop which is what brings me to your channel! I was researching this Bosch because I was digging it's articulating glide arm but after seeing you struggle to get the miter zeroed in and the clunky adjustment screws and such I'm having second thoughts! Uggh!
@BorsellinoHomeServices 8 ай бұрын
Yeah I don't love this Bosch saw...... If I was going to buy a new one I'd go for the Makita with the front mounted rail. It's the traditional rail glide system but reversed so you can put it against a wall. I don't know if it's any better than the Bosch but worth a shot anyways! Here's an amazon affiliate link to what I'm talking about amzn.to/46XPIGS #ad "As an Amazon Associate I earn from qualifying purchases." (I have to say that)
@ayellowbeard 8 ай бұрын
@@BorsellinoHomeServices Thanks for the reply and link. I'll check it out!
@ayellowbeard 8 ай бұрын
@@BorsellinoHomeServices Weirdly coincidentally today I saw the Makita LS1219L at a local pawn shop but they wanted $749 for it and it's quite used and about only $60 less than a brand new one. I might have been able to talk them down to $600 but I'm not ready to pull the trigger.
@smeferoo 3 жыл бұрын
That video will save me time for my set up on mine! Thank you!!
@BorsellinoHomeServices 3 жыл бұрын
Hope it helps! You're welcome
@carsonwells1785 9 ай бұрын
Thank you for the video. I was looking at miter saws last week and ended up sold on the Bosch. It will still be a month or two before I get it, but youve put a lot of my worries to rest already. Reading the online reviews ( I always start by reading the 1 srar reviews) a lot of folks complained that right out of the box it wouldnt cut square and there were no adjustments for it. 😢. Their loss. I was blown away by the smoothness of the Glide system. I will be using it primarily for making segmented rings which will be glued together and turned into bowls, urns, etc.
@BorsellinoHomeServices 8 ай бұрын
I'm seeing this a month later, have you had a chance to use it and get it set up? how do you like it?
@audiobrad99 6 ай бұрын
Not sure about the new ones, but the GCM12SD's from before 2020 could not be adjusted to do both a square cut when doing a chop and a square cut doing a slide. You had to choose one or the other because all you can control is the bed and fence, not the path of the blade when extended. The blade shaft is slightly out of alignment with the arm. Adjusting the bed and fence can't fix that. I've been trying to find a solution for 5 years.
@GregEpkes Жыл бұрын
Just got this saw. Very helpful video tour!
@BorsellinoHomeServices Жыл бұрын
glad it was helpful!!
@jcarlin 3 жыл бұрын
This video is really very helpful. Thanks for making it!
@BorsellinoHomeServices 3 жыл бұрын
Awesome! Glad it was helpful!
@jandblawncare8570 4 ай бұрын
Excellent video! I bought one of these after going through 2 yellow brand ones in 2 days. I love it but still need to tweek it a bit once the snow stops.
@jcarlin 3 жыл бұрын
Mine came perfectly square out of the box. Like, scary square. Needs a little calibration now though, so I'm glad I found this video.
@BorsellinoHomeServices 3 жыл бұрын
That's great! Mine was scary out of square! HAHA My guess was that they just built them and didn't adjust them before shipping, but maybe not?
@Iainwilliams67 Жыл бұрын
ATM my Glide is running true but so happy i found your video for future reference, Thanks from the UK
@BorsellinoHomeServices Жыл бұрын
Awesome! Thanks for the comment!
@oseaghin 2 жыл бұрын
Excellent video! Nothing but information presented as quickly as humanly possible without losing clarity. Bravo.
@BorsellinoHomeServices 2 жыл бұрын
hey thanks!!! I'm glad you found it informative without too much fluff
@0CalAgricola Жыл бұрын
Thank you so much for this video, it is making setting up my saw so much easier!
@BorsellinoHomeServices Жыл бұрын
awesome glad it's helpful!
@Freakstyle11 2 ай бұрын
Great video. Thanks for sharing!
@glennburch1081 2 жыл бұрын
Just purchased this saw but have not set it up yet. Looks pretty straight forward. TY for making this video, should help me out when I get aroubd to adjusting all the blade angles which will be soon.
@BorsellinoHomeServices Жыл бұрын
you're welcome! thanks for checking it out!
@brianmonticello5510 2 жыл бұрын
Noticed mine was not cutting straight today and this video was super helpful.
@BorsellinoHomeServices 2 жыл бұрын
awesomesauce! i hope it helped you get better cuts!
@TheRealHawKing 5 ай бұрын
Great video !
@leeberry9666 11 ай бұрын
Great video.
@KrazzeLoveDating 2 жыл бұрын
*Great machine for the price! Pretty powerful **MyBest.Tools** and light to carry around the home. I definitely recommend this saw for any homeowner. Also, came with an extra blade. I was very satisfied with the overall quality and price.*
@BorsellinoHomeServices 2 жыл бұрын
thanks for the input!
@carlduncan8462 Жыл бұрын
You say it's easy to carry around the house? I have one and it weighs 67 lbs. I carry my work to it. It is a great saw and mine came out of the box set up spot on.
@donaldamlaw1266 2 жыл бұрын
Thanks for making the video, very informative.
@BorsellinoHomeServices 2 жыл бұрын
You're very welcome! Thanks for the comment!
@atongcbuti4916 3 жыл бұрын
Well done bro !.thanks for this video !
@BorsellinoHomeServices 3 жыл бұрын
Hey! Thanks and you're welcome!
@dwayneford1990 2 жыл бұрын
Great video. Thanks. I have the 10 inch saw which is just slightly different but the way you did things was extremely helpful. I wish you would do one on the 10 inch version. Thanks so much!
@BorsellinoHomeServices 2 жыл бұрын
Thanks! Honestly, I wish I bought the 10 inch instead of the 12. I think this has too much blade deflection and wobble overall. Plus it is really heavy and awkward to pick up. Much harder than my old dewalt to transport.
@dwayneford1990 2 жыл бұрын
@@BorsellinoHomeServices The Bosch 10 inch is only 1 pound lighter than the 12 inch according to another KZfaq video I watched. It is no picnic to move around, especially at my age! Anyway, your video really helped me to understand the tuning up process. A tiny bit different on the 10 inch but still much more doable after watching your excellent video.
@BorsellinoHomeServices 2 жыл бұрын
@@dwayneford1990 Oh wow good to know. I had just figured it was way smaller! I'm glad you found the video helpful!!
@JF0913 3 жыл бұрын
Thank you so much for this tutorial it will come In Handy !
@BorsellinoHomeServices 3 жыл бұрын
Absolutely! Hope it helps!
@tonepalma 2 жыл бұрын
Thanks for this awesome video
@BorsellinoHomeServices 2 жыл бұрын
Thanks for letting me know you liked it!!! I'm glad it was helpful!
@hanif20231 7 ай бұрын
many thanks very useful info mate.
@dbrotten2556 3 жыл бұрын
Thanks for the vid bro! Very helpful
@BorsellinoHomeServices 3 жыл бұрын
Awesome! Thanks for the feedback!!!
@peterbonotan3654 2 жыл бұрын
So thankful for your video!
@BorsellinoHomeServices 2 жыл бұрын
You're very welcome!
@robertboyero3797 Жыл бұрын
Great video Can’t wait to get home and check mine.
@BorsellinoHomeServices Жыл бұрын
hope it helps
@jimtownsend7899 3 жыл бұрын
Very thorough. Thanks for sharing this info!
@BorsellinoHomeServices 3 жыл бұрын
Glad you enjoyed it!
@abdullaalsaffar8460 3 жыл бұрын
Hi, Thank you so much for the great vedio. I am planning to buy this saw. It would be my first miter saw. So would you recommend this saw in any case? Thanks again and appreciate your reply.
@BorsellinoHomeServices 3 жыл бұрын
It might be a little overkill for what you need. I really liked my DeWalt saw, the only reason I upgraded this was for the extra space behind it building it into my mobile shop trailer
@karenc9667 Жыл бұрын
Awesome video highly recommend
@BorsellinoHomeServices Жыл бұрын
thanks!
@lucnkem1879 Жыл бұрын
wow thanks a lot for sharing this that will surely resolve my issue with this saw 👍
@BorsellinoHomeServices Жыл бұрын
sweeeeeeeeeeeet! I don't think I've had to adjust mine since and it still cuts fairy straight. Although I'm disappointed in overall quality of the saw. It has inconsistencies in the cutting
@justcruisin109 3 жыл бұрын
Great instructions - thanks so much.
@BorsellinoHomeServices 3 жыл бұрын
you are very welcome!
@charlestemkin270 Жыл бұрын
To adjust the main cut at 90 degrees, I have found it very helpful to use a pair of Rockler micro adjusters for the router table. When these are sold, they all "face" in the same direction, but it is very easy to reverse one of them (you unscrew the part that touches what you are going to adjust, take the long screw out of the clamp and screw it into the clamp in the opposite direction, and then screw the face part back in). It is then possible to clamp one of these to each side of the board the saw is attached to, lining them up so that one presses on the right side of the saw and the other on the left. This enables you to make fairly small adjustments to the position of the saw; you just unscrew one a little and then screw the other one in a little more. This is a lot better than whacking the saw one way and, when that proves too far, whacking it in the other direction and hoping that you luck out.
@BorsellinoHomeServices Жыл бұрын
is this what you're talking about? www.rockler.com/micro-adjuster-for-router-table-fence I just can't for the life of me figure out how I would attach that to my saw to adjust the angle
@andre1987eph 8 ай бұрын
@@BorsellinoHomeServiceshe never replied
@jeffalan6339 2 жыл бұрын
I was debating Milwaukee or Bosch. I believe the decision has been made Bosch.
@BorsellinoHomeServices 2 жыл бұрын
i didn't know milwaukee made a space saving saw... I'll be honest, after owning this thing for a while I don't love it. In fact, I liked my old dewalt better. But I needed the space saving to fit it into my trailer shop setup
@jeffalan6339 2 жыл бұрын
@@BorsellinoHomeServices not a space saver, just a sliding miter saw. 6955-20, in my opinion is more of finicky. Though being a milwaukee well built. I tested a makita was not to fond of it, feels odd, makita does contractor grade tools. I have a portable table saw, it's a work horse.
@philm1175 2 жыл бұрын
Great video, but god this saw has so many steps to do anything to. lol.. It ate up a good portion of my day doing these adjustments vs actually working. Hope it stays perfect for a long time!
@BorsellinoHomeServices Жыл бұрын
Yeah it is a pain to setup for sure. I haven't readjusted mine since I made this video but I don't use it very often and when I do it cuts good for me. If I was going to do a job that needed exact precision I might check it over again
@rlz007 2 жыл бұрын
excellent video, thank you!
@BorsellinoHomeServices 2 жыл бұрын
Thanks! And you're welcome!
@damirlorca1298 6 ай бұрын
thank you very much brother! hello from chile
@PimenovSun 3 жыл бұрын
Great video. Thanks!!!
@BorsellinoHomeServices 3 жыл бұрын
Glad you liked it!
@allent555 3 жыл бұрын
Very good video
@BorsellinoHomeServices 3 жыл бұрын
Thanks for the feedback!
@Stevelemontrudy Жыл бұрын
Nice job! You explained that really well. My big take away...I need to slow down, be more patient and take my time. Thanks!
@BorsellinoHomeServices Жыл бұрын
patience is key in woodworking!
@brettlight4849 2 жыл бұрын
Speed square and the framing square are my go to Items to recalibrate. Never used the Tri square for this
@BorsellinoHomeServices 2 жыл бұрын
yeah basically use whatever works for you. Framing squares can get out of square and you can recalibrate them so I always check left and right sides. And no square will be 100% dead on, or at least it's near impossible so always double and triple check everything every way you can :)
@str0wz629 3 жыл бұрын
Well done
@BorsellinoHomeServices 3 жыл бұрын
Thanks!
@sum1sw 3 ай бұрын
Thank you so much. I'm not happy with my 45° cuts. They do not end up making square. Hopefully after I do what you illustrated I'll have better luck
@sflagg0817 3 жыл бұрын
maybe Bosch should put this on their website, i just picked up this saw i am a beginner at woodworking its probably more saw than i need but i had just bought the Metabo 10 inch zero clearance miter saw, it is a good saw but at 399 plus tax 430 and change i saw this saw on marketplace for 500 brand new in box so for 70 more dollars i figured why not, i do like Bosch equipment i have their drill, impact wrench, jig saw, circular saw all 18 volt what i like about the circular saw is that the blade is to the left if that makes sense, great video.
@BorsellinoHomeServices 3 жыл бұрын
Cool! I hope you like it. $500 is a steal for this saw!
@sflagg0817 3 жыл бұрын
@@BorsellinoHomeServices thanks that's why when I saw it listed I told him I was interested but I wasn't able to get to Lowes until the following day to return my Metabo he was fine it all worked out for 70 bucks difference better saw, I do have the Metabo 10 inch jobsite table saw and like it that was another good deal, holiday price at Lowes was 329 down from 529, two weeks later 299 so I got more cash back. Great videos also.
@BorsellinoHomeServices 3 жыл бұрын
@@sflagg0817 sweet. thanks for the feedback! :)
@rottiejakeluke 11 ай бұрын
This was an absolutely fabulous done Vedic. I might have missed it but i don’t rember hearing you mention the sizes of the used sockets nor the Allen keys. Thank you.
@BorsellinoHomeServices 10 ай бұрын
thank you. It's in the video in the tools needed section at 2:41 4mm and 6mm
@rottiejakeluke 10 ай бұрын
@@BorsellinoHomeServices thank you. Great video, again thanks.
@gabec.7541 3 жыл бұрын
I returned my first saw because it too was out of square and bevel was off and no matter what adjustments I did as per the manual, it was always off. Either the left side would true up but the right side was off and vise versa. I ended up calling Bosch and the tech guy basically said it’s probably a defective saw and the option were to have them service it or I go back to Depot to exchange it. I ended up exchanging it and the replacement saw right out of the box was spot on square and bevel. I did notice on the original saw that the spacing from the table to the underside of the fence on the left was less than on the right side. The new one has equal spacing. So just exchange it for a good one. Overall I am very disappointed with Bosch’s quality control to allow this issue that so many others are having. I didn’t want to give up on it because Lowe’s had it on sale and depot did the price match plus 10%. also after speaking to depot customer service regarding this saw they took another $30.00 off, so I ended up paying only $599.00 + HST. Nice!
@BorsellinoHomeServices 3 жыл бұрын
DANG! Good price! I imagine I'm out of the timeframe where they would let me return it but maybe not??
@cw6136 Жыл бұрын
I would tighten those bolts down like a car tire. Switch back and forth between the sides and tighten them a little at a time.
@BorsellinoHomeServices Жыл бұрын
good tip!
@TheSoulshakepower 2 жыл бұрын
This helped me a lot, just bought one! I think your ref. in title is wrong: the 'SD' is the one with the Rail, this is the GCM12 GDL (at least in Europe). Cheers from France!
@BorsellinoHomeServices 2 жыл бұрын
Nope it's correct. Here's a link to Bosch's website... definitely SD. But thanks for the heads up I'm assuming it's just different in Europe (which is odd) www.boschtools.com/us/en/boschtools-ocs/miter-saws-gcm12sd-33969-p/
@regibson23 2 жыл бұрын
That broken wrench is about my experience with all of Bosch's products lately. Trading on the brand name and cheaping out on quality.
@BorsellinoHomeServices 2 жыл бұрын
It's really too bad that that's where they cheap out... on the freakin alan wrench. Makes you wonder what else they cheap out on???
@regibson23 2 жыл бұрын
@@BorsellinoHomeServices out of curiosity, how tight are the detents at 0, 22.5, 45, etc. On DeWalt and Makita saws they're very tight--you don't even need to lock it off. But when I tried the Bosch at the store it just seems sloppy. Moves a good 1/16". Not sure if that's HD people putting it together sloppy or if it's just got that slop. I expect the slop from a Harbor Freight saw. But when I'm spending $600, I expect more.
@scottmulder292 Жыл бұрын
Edit: after completely hating this saw for 8 years, I gave it another go at squaring and used the test cut over and over method you wound up with. Needless to say, first perfectly square cuts ever with this saw! Thank you for getting me to be more patient!!! Original: I have never in 8 years been able to get this saw square. Square all you want then pull the lever and it magically racks out of square. The absolute worst saw for me.
@BorsellinoHomeServices Жыл бұрын
I'm glad that I was able to help you make your saw cut nice! I can't say I love this saw though I think it has too much wobble and deflection in the arm mechanism
@mindfulmagician7550 10 ай бұрын
I’m contemplating buying my first mitre saw. It’s either this or the Dewalt DWS780. I’ve been afraid of getting the Bosch because of this reason with the adjustments needed after cuts which sounds annoying but based on this comment, it’s seems the “cut over cut” method might do the trick. But then you’re mentioning wobble now?
@XaeroR35 2 жыл бұрын
Thanks for this video. Wish I had found it sooner. I had been fighting with non-square cuts for awhile and could not figure out what was wrong. Do you know how to adjust the rotating base? Mine is extremely tight and difficult to turn.
@BorsellinoHomeServices 2 жыл бұрын
hmmmm unless it's in this video, that's an adjustment I am unaware of...
@ehRalph 3 жыл бұрын
Like you video. Still trying to figure out if the depth of cut can be easily set for cutting notches like my old Hitachi slide miter saw did with a thumb screw.
@BorsellinoHomeServices 3 жыл бұрын
thanks ralph! yeah I'm not 100% sure but I don't think so. Just one stop fully down for transport.
@bestsellzone5394 3 жыл бұрын
Awesome
@BorsellinoHomeServices 3 жыл бұрын
Thanks!
@cristianpascariu7977 3 жыл бұрын
Super.Multumim.
@BorsellinoHomeServices 3 жыл бұрын
😎
@luckysakonta3724 Жыл бұрын
My machine fell accidentally while moving it and the angles misaligned, and I've been so frustrated not knowing what to do, but I hope I'll be able to make a significant change after watching this video. Thank you
@BorsellinoHomeServices Жыл бұрын
hopefully you didnt bend anything! My old dewalt fell once and was never the same after.
@luckysakonta3724 Жыл бұрын
@@BorsellinoHomeServices I tried to do the adjustments, maybe not 100% to the original factory settings, but it seems much better than before I watched your video, because I was a little bit weary causing more misalignments. Thanks a mil for sharing your experience.
@CYTOMETRYman 2 жыл бұрын
Thanks Excellent video - I have it square - but I can no longer lock in the 0 deg pin.....it seems that when I aligned it - the pin wont go in - it goes in for 30 deg bot not 45 or 0 - any suggestions
@BorsellinoHomeServices 2 жыл бұрын
so you can't cut square??? I would just start taking stuff apart in the area the problem is until you figure it out. work backwards and keep track of what you took apart
@pharmdiesel Жыл бұрын
Thank you! My saw too needs calibrated out of the box. It is cutting crooked like yours.
@BorsellinoHomeServices 10 ай бұрын
hope it helped cut better!
@markmurtaugh656 7 ай бұрын
Great video and so helpful! When you adjusted the vertical bevel at 12:55 and went the wrong way, how did you get the blade back the other way? The vertical adjustment screw seems to only adjust the vertical bevel one way.
@BorsellinoHomeServices 7 ай бұрын
not sure. I made the video 3 years ago and haven't had to adjust it since
@pf5658 2 жыл бұрын
Thanks for taking the time to make this video, but for what these saws cost you’d think the manufacturers could at least do a better job in ensuring these saws leave their factories in a much better condition of being squared and ready to go. This is a lot to go through just to make sure your saw is cutting square and accurate. Honestly this is a bit ridiculous. JMO.
@BorsellinoHomeServices 2 жыл бұрын
i totally agree!
@falxonPSN 2 жыл бұрын
You're not wrong, but sadly this has been required on every brand miter saw I have ever owned. The only one I haven't owned is Festool, because I'm no millionaire.
@scottmulder292 Жыл бұрын
I have never in 8 years been able to get this saw square. Square all you want then pull the lever and it magically racks out of square. The absolute worst saw for me.
@jeffgruber618 3 жыл бұрын
Thanks very much. I’ve had such a hard time getting this saw square and kinda a piss off it doesn’t come calibrated properly for the price you pay. I’ve don’t this before and given up, but I’ll try it again!
@BorsellinoHomeServices 3 жыл бұрын
I am not particularly happy with the saw. I only bought it because of the knuckle system so I could keep it set up in my trailer but it doesn't make good cuts even after precisely setting it up. Feels like I got ripped off...
@jeffgruber618 3 жыл бұрын
@@BorsellinoHomeServices yes I feel the same. I too got it for the arm and low profile keeping it against a wall. I’m looking at getting a 12” non sliding mitre saw just for better more dependable cuts.
@robbrown6667 Жыл бұрын
For the price of this saw, it should come all dailed in!
@BorsellinoHomeServices 10 ай бұрын
I AGREE!
@fc1133 3 жыл бұрын
Hi. I just got this saw and really appreciated your video, so thanks for that. Having said this, I have a slight "issue". My first cut did not go "through" all the way. What I mean by that is that the blade moved not far enough (away from you) to cut all the way through the piece of wood... Why would that be? I see all kind of stops build into this thing, but could not find one that would limit the travel back and forth!? Any idea? Thanks.
@BorsellinoHomeServices 3 жыл бұрын
That's odd. I have noticed that it barely cuts through that bottom back side and I often wonder if it cut it all the way. Are you using the blade that came with it or something else? The only thing I can think is that there is something stuck somewhere like styrofoam packaging or something inside the knuckle?
@fc1133 3 жыл бұрын
@@BorsellinoHomeServices Hi. Sorry for the late reply... I am using the blade that came with it. However, I made a few more test cuts and they all went all the way through this time. However, I feel like I have to push harder than I should, in order to make the cuts all the way through. I will check for something stuck in between though. Thanks.
@cliffodom5803 2 жыл бұрын
I’m having trouble with both the handle to allow/unlock the angle right and left and you showed how to rectify that. But the bevel knob that allows tilt right and left is so impossible to turn I feel to force it will break it. How do I loosen this one?
@BorsellinoHomeServices Жыл бұрын
hmmm, if i didn't cover it in this video then chances are I haven't adjusted it myself either. Just trace it backwards and see if you can find a nut or bolt or something somewhere
@JoseGarcia-gn4ng 4 ай бұрын
Thank you for the video. Do you know how to unlock the mechanism for the right 45 cut, mine is lock and l can’t turn the miter to the right side, the red button is stock
@BorsellinoHomeServices 3 ай бұрын
uhhhhhh i can't think off the top of my head. I think it's a button or lever on the front. did you check the instruction manual?
@spongerobertosquarepantalo322 3 жыл бұрын
I got the same saw. Checked the angles setting it up like you should when you get a new saw and everything was perfect so IDK
@BorsellinoHomeServices 3 жыл бұрын
I adjusted it again after using it for a few months and was able to get it much better. Just needed some time to wear itself in I guess. The only thing I don't like is there seems to be something off with the knuckle which is not adjustable... Doesn't seem sturdy enough or something so the blade deflects. I'm not explaining it even properly cause I don't know how to explain it
@JuanRodriguez-jn7zx 3 жыл бұрын
Thanks
@BorsellinoHomeServices 3 жыл бұрын
No problem!
@ii-qo7tq Жыл бұрын
Hi mate. Do you have to adjust also any other angle or just those that you show in the video? Thank you for your help
@BorsellinoHomeServices Жыл бұрын
I think I went over all the adjustments this saw has but there is a possibility I missed something
@ThaGreatestAlexander 3 жыл бұрын
for accurate 45deg and 90, i learned you can get a cheap plastic drafting 45. I use it for setting tools before getting engineer squares
@BorsellinoHomeServices 3 жыл бұрын
good to know thanks!
Unemployed Redneck Hillbilly Creations
Рет қаралды 19 М.
Borsellino Home Services
Рет қаралды 10 М.
Ruslan Bogdanov
Рет қаралды 8 МЛН