Kent, we appreciate the time you take out of your day to inform us here.. I’ve been a follower for a long time and you have helped me do so much on my 85 300sd. Thank you for being so detailed in your explanations. Everything you said at the beginning of this video couldn’t be more true. I hope people hear the msg!

You are the best in Mercedes classics, ty for all what you do, loves fron turkey

this brings back memories , started my mechanical apprenticeship in very early 90s at an independent merc dealer. spent most of my time in the dedicated tune up bay with a crypton machine , working on W123 , 126 and 124 series cars. k jetronic and some had a stronburg carb.

I am very impressed by the dedication and passion you have for the Mercedes of the 70-80s, I really like watching your videos, I wish you the best

Great video, looking forward to next one about the WUR renovation, exactly what I plan to do on my 280CE. Thanks Kent! Best from one of your customers from Sweden

Great video, looking forward to next one about the WUR renovation

I really appreciate these videos and am excited to see the new diagnostic kit and videos come out! I am learning on a KE injected Lotus esprit and am excited to learn!

Thank you Kent. Your videos helped me a lot. With my 124 300ce 1991 M104 the filters from the fuel line into the fuel distributor were clogged after 5 years sitting at the dealership. Costs 10$ at Mercedes and solved the problem.

Wow! Very interesting videos! I'm waiting for the next one!!

Thank you very much for your content,I will be resurrecting my M103 after sitting for 3 years.

Hi Kent. Love your videos. Where were you when I needed you? I went through everything you mentioned before I ever came across your very informative videos. I bought a 1991 300E with the 3.0L that was sitting in a field and not running. With much frustration and trial and error. She's running and I love this car and the engineering that went into her. Here's the list of materials I've replaced. Fuel pumps, accumulator, fuel filter, CIS, injectors. Idle control and cold start injector. All because it sat for a long time and the 10% ethenol destroyed the fuel system. I only use non-ethenol fuel and love my car.

Thanks for the explanation of the parts. Greetings from Germany 🦅

really look forward to the video and the kit

I laughed out loud when you said you can't just go to harbor freight and buy a fuel tester kit because that's exactly what I did and now I'm looking for the correct fittings.

you are the best Kent. my 300 ce w124 va not running right the owner before have change the fuel pumps and the fuel accumulator. my problem was the mixture on the fuel distributor and car goes finally fine now

Good to see you Kent

Nice vid Kent :) I overhauled my whole KE jet on my 190e 16v but it still has cold start issues, even changed the OVP relay.

As my Father's Giant Analog Sun Scope said: We Test not Guess......

I think I experienced a little post traumatic stress from watching this. I went through this whole system on the 300SE I bought from you a few years back. It was a huge learning experience and I've forgotten 60% of what I learned but the car ran so nicely when I was finished that it was worth all the effort. This will be a huge benefit for folks keeping these cars on the road. Thanks for all of your efforts.

Best man best Chanel for me I like classic Mercedes thanks

I inherited a 300SE from my dad, 120kkms since new.. I need this kit asap :)

Thank you for sharing your knoledge Kent! I love this videos they are really helpfull

Very interesting video series :)

Çok Teknik ve profesyonel çalışıyorsunuz,Videolarınızı İzmir-TÜRKİYE'den ilgiyle izliyorum,benim aracım 19 yıldır bende,w124,200E,102m, K-JETRONİK 1991 model Mercedes,kolaylıklar diliyorum

Great timing - I've got two non-running W201s! Bloody things.

Can’t wait!❤

Runs fine on the road but idles very bad. I don't mind doing work. but good guidance is nice .

Thanks Kent for all that you do! I am one of the few shops in the North Texas area that will actually service these old Mercedes with jetronic and KE Jetronic and employees Mercedes-Benz factory trained mechanics back from that era. There are so many variables to the system, and so many things that can go wrong. I have watched countless videos on the subject and none of them are all one size fits all unfortunately.

Kent! What a relevant video for me. I have a 280se that has sat for over 10 years. Can you address the problem with k jet air sensor plate not returning to resting position? I can’t figure out how to free it up and get the full “swing” out of the sensor plate … thanks and please keep going with this series!

Your comment about it being a "Flux capacitor" is very apt as the DeLoreans PRV engine uses the K Jetronic system.

Kent...you are a World Wide national treasure!!.....fantastic!!!! Kit to prevent using the Parts Cannon

Thank you for a interesting dynamic test. Mak Pakistan

Good information .. Thanks

Good work

always great videos 1991 300SL will not start when sits overnight unless add fuel into bowl then have to let idle for a while before i can rev engine all vacuum lines hoses fixed and ovp relay still no luck it did sit a little bit.

Nice pro . Stil work wthe old mercedes 👍👍👍👍

Thanks

Very.usefull

This newer bosch system is the reason I got rid of my 1993 190E. I replaced parts left and right, spent so much money and hardly ever got to enjoy driving that thing before more things started failing. Loved the car, one of the most enjoyable cars I've owned, but it gets old quite quickly having to constantly troubleshoot it. I sold it 3 years ago for the same price that I had spent in parts in just the two last years of ownership. Next time I'm owning a 190E (because that will happen, surely) I'm replacing the dated bosch engine with a newer 3.2 v6.

i have w124 from 88. has a w103 engine.

I'm so happy that my Mercedes-Benz w126 has the OM 617. Without a Flux capacitor 😜

I have a 1981 Saab 8v turbo c900 with K-jet and it needs a full work through of the fuel side to get it running again.

Hi Kent I have a 1987 230GE which has the KE-Jetronic. I left it parked up for over a year and when I tried to start it it would start for about 2 seconds and then stop. I have changed the relay but it did not make a difference. I have also checked the fuel pressure at the fuel distributer and it reached 135 psi whilst cranking. Can you suggest what I should do next.

The minute I bought a fuel pressure gauge was when I began to sort my KE-Jetronic. Used in conjunction with the factory WIS/EPC, it will end all speculation and you will get to the bottom of it. I suspect that the following installments will chart my journey exactly. Do not let ethanol fuel get anywhere near KE-Jetronic.

Hey there buddy would you happen to know the base turn settings fuel to air on the k jetronic fuel system? And any idea what the allen screw on the back of k jetronic is for?

Diligently watching as I work on a Kjet Volvo…

Hello Kent if I could ask is there any way you can make a video on Ac recharge or a how to on retro fittings for a 1982 Mercedes Benz 240D 4L my ac works fine but I don’t know anywhere for R-12 and I’ve been getting many recommendations for a conversion. But some say I can do just fine with a recharge? Any thoughts?

I parked my w124 coupe in the garage and haven't used it for about 2 and a half years and it was working and running perfectly. I got it out the other day and now shows no fuel on the dial even though there is definitely fuel in the tank, I have good fuel pressure coming from the main fuel line but it fires up for a second or two then shuts off before not running at all. Just starting to troubleshoot now. Thanks for the video.

im thinking the best way is to pull the intake with the system on it and work on it on the bench.

Where is the factory manuels you mention?

👍🏻👍🏻👍🏻

Kent fantastic videos you make ..One question my M103 has both the WUR and EHA valve is there a reason for them both to be on my M103 engine

Kent, I just purchased a 1978 euro spec 280sl, r107. I'm finding your videos really helpful and would love to know if you could give me some ideas what to check for a problem I have noticed. I smell fuel in the cabin while driving only after I have filled the tank completely. When the gauge reads about half full the problem disappears. No visible leaks noted.

Well after testing my fuel pressure, having correct lower and higher chamber pressure I began throwing parts at the car. My M103 2.6 with manual won't idle at 750rpm checked for vaccum leaks with a smoke machine. It feels like it misfires on cylinders when running low. Adjusting Fuel mixture so it runs more rich about 1k rpm only can idle. I'm lost! Next I will change computers.

Hi sir, great account. I have an issue with my ‘87 560SL. The exhaust CO test failed. It runs ok, yet too rich I assume. Can you tell me what causes the co to be very high? Best regards, Abel

I need that kit

I'll be watching intently as I often fall into the "as long as I'm in here" trap...not a bad thing but I replace any potential wear item -hoses, pumps, seals and if component X is a known high fail rate product and its under the intake manifold, as long as I can replace or repair for under $50 or so, its gotta be replaced. Kind of a Belt AND Suspenders approach

I am trying to find someone who sells the filter that goes inside the metering head around the control pin barrel, for a mk2 Golf GTI......

Hey , i love your videos and watched may of them, I have a 1991 500 sl and its been seating for a while, it is starting nice and running ok till it gets warmed up, about 75 degrees, I can drive it for about 2 miles, after that it looses power and the only way i got home is driving on idle speed only, I if try to push gas its smocking black smoke ,i replaced fuel pump and fuel accumulator, any suggestions???? thanks WZ

👍

the 10th circle of hell is reserved for bosch engineers/sadists, for devising this dastardly system. that being said, jetronic's incredibly fascinating and eventually satisfying when it's flawlessly running on all cylinders. probably half the fun of working on old mercs, and a great way to score bargains after mere mortals throw in the towel ☺

This is what i need to do with my 92 190e 2.6 its running rich and tends to stumble on acceleration.

Where can I get the kit and whats its value in dollars . Thank you

Hey Kent! Off topic, but am wondering if you've ever diagnosed a W123 cruise control. Keep up the great work! I'm about to buy your anodized aluminum polishing kit!

Hi have a 1986 420sl ticks over ok but cuts out when trying to drive, have changed all filters, could it be carburettor problem?

hello kent im having issues with my m102 engine. I changed the fuel filter and fuel pump. the engine starts but i have to press the pedal down for it to run. if i let the pedal go the car shuts down. it starts but shuts down. it wont idle on its own. when i keep the engine running it runs rough im kinda frustrated and i think that the accumulator is bad.

My 1972 W108 4.5 starts and runs fine..but after few miles..if I pull over the road the idle is bad and rpm drops..How can start investigating?

Kent's exasperation with 'no-background inquiries' reminds me of working retail years ago in a record store, long before search engines like Soundhound. At least three or four times a week I'd have some variant on this conversation Me: Hi, welcome to ________________________. Can I help you? Customer: Hi, do you have that new song? Me: We probably do, what's it called? Customer: Oh, I don't know that. Me: Well, do you know who sings it? Customer: It's by that girl. Me: Do you know her name? Customer: No, but she's on the radio a lot. Me: Do you know any of the words to the song? Customer: Not really, but it's a love song Me:😐

How can I buy the kit for ke jetronic ? With instructions ,I Searched mercedssources web site and couldn't find it, I appreciate sharing the link,my problem: once duty cycle is adjusted the RPM stay high to 12000 RPM ,car is 190e 4 cylender 2.0 1992

CIS no more guessing KIT ..cool

Bergsma. Moaie Fryske namme. Groetnis út Fryslân!

W126 gang

My DeLorean has all these same parts

I have an 88 300SE. I think that rubber boot on the botton of the system should be replaced along with a set of injectors and seals. although the car runs fine and starts easily with 200k miles its time to do some maintence. i never checked that fuel screen, idk mine had that? The only odd failure the car had was the crank position sensor. it would heat soak when the car was shut off at the gas station snd not restart! spark was scattered and too weak to fire tge engine aparently, of course the car would cool down and run fine again so anywhere i took it couldnt find the problem when it wasnt in a failed state.

Ken, where were you 30 years ago??? The cars are too old now!

Make Mercedes Great Again in '24