😂😂😂😂 completely destroys the face of the two bricks at the end

Legend has it the architect and engineer are still arguing over the best way to repair these bricks

You broke the brick, now you have to remove the brick to keep the architect happy. Lol

Haha! Too funny! How to spall the brick, I thought that’s what we were trying to avoid

Bloody hell a video that shows you how to damage bricks.

The new Bosch brick breaker

You'd think that if they actually wanted to sell the product they would have taken the time to re-shoot the video in a different location or NOT post the video - Duh!

He chipped the last two bricks cause he went too deep. The wider shaft of the tool hit the bricks. I think this is a good idea if your careful using it, he wasn't.

Dint he just chip the brick at the end what a joke i ain't buy what your selling

New video title. “Introducing the Bosch B3 (Bosch Brick Breaker”)...🙄

thanks that was so funny 😂

Broke the brick at the end

Just needed to slap that title on at the end a bit quicker!

I used a 1/2 inch masonry bit to get the half moons out. The red granite brand

Shocking demonstration by Mr clueless

We made our own hammer drill bits to do that back in the 1970's.

Looks like SD plugging chisel? Looks ok. Beats hand chisel.

Uppppps....cracked the brickwork...in fact DESTROYED the brickwork!!!

2:15 destroys the brick..ha ha best ad for Bosch!! Pink Panther style

i mean this with the greatest respect,,how on earth have a company like bosch let you show that clip?you chipped the face of the brick?its miles too heavy a tool for lime mortar and how would you get the tool in tight joints.. its a glorified chisel.. good luck with you product!!

Yup,best way to preserve those bricks is with a modified kango blade. Genius....

did he just chip of half the brick?

Plunge chisel works just fine to break out the “half moon”. Anyone else here do pointing work? Trying to decide if I want to spend the money on one of those fancy joint cutters. Dust be damned, I’m good with my 4” dwalt with the paddle switch and they are reasonable in cost to replace as they burn out.

im ordering all the bits and then throwing them in the thames TPOS

kinda reminds me of napoleon dynamites brother running over the tuperware with the van.

Cameraman couldn’t cut quick enough there 🤣

Worst presentation ever!!

Jaaaa...no broken bricks and the last minute you did!

i was facepalming the second he pulled out the hammer drill. i've been tuck-pointing since i was 17 years old, if you took that thing up against half the walls i've done with soft 200 year old bricks, the walls would crumble.

That looked like it was coming from as soon as the video started.

This video clip is about 8 seconds too long!🤣 I use my plugging chisels and my small brick hammer for this and it has worked like a charm for the last 30 years. Some things don't need improving.

YOU ALLREADY FUCK UP THE BRICK

WELL THERES THAT

😂😂😂😂 Best demo on KZfaq. 🤣🤣🤣🤣

Hahaha. This butcher just broke 2 bricks right at the end of the video.

You chipped the brick @ 2:17...lol ...🙈 😱

Not only did you damage the brick but you're talking about having to replace the brick with a damaged face....no you turn it around and if the other side is undamaged you re-lay it. Simples.

haha thats all I have to say to this product

Jajajaja que rompe el ladrillo me dejo imprecionado

You just destroyed two bricks, hahaha

What a pratt!

Great way to do quick shitty repairs. Something we don't need more of.

Lol wrecked them bricks ,don't think I get one of those

Lmfao chipping tow bricks

Destroys two Bricks at the end lol

YA, SO OBVIOUS. THIS DEMO GUY EXPERT WITH THE EXPERT TOOL does just what the unprofessional guys can do. Har Har. Surprised they even posted this video.

Good job that, look's a awsome bit of kit 😂😂😂😂😂😂🤦‍♂️

Yes, you just showed us how to destroy the bricks face and you just condemned other masons for doing the same thing the right way.

🤣🤣🤣🤣🤣🤣🤣🤣 ended that quickly

Yaw I werk fer Bawsch! Jesus Christ that’s one hell of a Midwestern accent there, bud! Great job demonstrating how worthless that attachment is too.

Made the job harder and more expensive by damaging two bricks, totally contradicted what he was saying

I think I'll pass 😂😂

He broke a brick. should have edited that out. OOOPS! Vibration is a killer on bricks. Especially old brittle bricks.

Surely but surely you could have edited the last 6 seconds out of the video.

Ah haha he fucked it up!

Skip to 2:00 to se exactly why you wouldn’t use this 🙄

Oops

Lmfao slow as shit!!! And totally ate your whole "keeping the brick in tact to save time and money" Lol thank Bosch for saving me an hour of my time lining up at the customer service desk of home depot taking that piece of crap back 😂😂😂

Absolutely appalling

Hahaha, classic!

you just broke it .Just use a drill

Ridiculous....destruction of brick faces with the tool ! And what a disgusting mess of the pointing already done ! What a joke

😕I think he just chipped the corner of the brick... I understand that this guy is a sales rep , not a contractor, but still.. it might not be a miracle Bosch tool after all .. ❓ Anybody, please, could post a reply with the link on how to do it properly and what tools to use?..I have cracked brick mortar and have to remove it and re-point. I have seen some expensive diamond router bits.. too expensive solution for a DIYer. THANKS

Definitely won’t be f ink buying one of them 🤥

Junk save your money. Its a glorified jack hammer head. And he broke the two bricks he was just complaining about doing.

What the fuck lol 😂

😂😂😂😂

Pointless useless chisel in his hands.......will cause much damage, as he proved !

DO THE EXACT OPPOSITE AS THIS GUY...WATCH TILL THE VERY END

An amateur could do a better job with a chisel

🤣🤣🤣🤣🤣 fail

To much talk talk talk!

Lol All That Talk of not damaging the brick, you then broke the brick, useless tool. The Mortar knife isn't much good either. 😂😂😂

Too big, too inaccurate. Overall a bit shite.

I’m back some how lol probably the worst demonstration ever