28 ways to use a Multi Tool | Dewalt
Рет қаралды 734,956
Күн бұрын28 uses for the 18v DEWALT DCS355N Oscillating Multi Tool amzn.to/3uN11A9 - Some of the many uses of a powered cordless Oscillating Multi-Tool. These Multi Tools are the most versatile tools that money can buy. The Dewalt cordless oscillating multi tool cuts, sands, scrapes, trims and much more. There are literally hundreds of every day tasks where an oscillating Multi Tool can be useful. I show in this video a handful of uses that I use mine for........but there ARE hundreds of situations where these can be used ! DEWALT DCS355N MULTI TOOL (Bare unit) - amzn.to/3uN11A9
The particular Multi Tool that I use is the Dewalt DCS355N - This tool is one of the best out there due mainly to the quick release mechanism that holds the different blades in place. I can highly recommend this particular model for any one that is thinking of purchasing a multi tool.
To see the older version of this video, where I actually explain some of the uses, please click here - • 20 ways to use a Multi...
My Amazon SHOP where I have listed all of the tools and equipment that I use for anyone that is interested www.amazon.co.uk/shop/bacrenp...
LINKS TO THE TOOL & SOME BLADES FEATURED ARE BELOW -
DEWALT DCS355N MULTI TOOL (Bare unit) - amzn.to/3uN11A9
DEWALT 18V 4AH BATTERY - amzn.to/3foHgpa
DEWALT BATTERY CHARGER - amzn.to/2Ar3NCZ
VALUE PACK OF BLADES - amzn.to/30DJahq
GROUT REMOVAL BLADE (Thin) - amzn.to/2C84AsT
GROUT REMOVAL BLADE (Thick) - amzn.to/2MZRRKZ
GROUT REMOVAL SICKLE BLADE - amzn.to/2YC761R
BI METAL / WOOD BLADES - amzn.to/3fupXTH
SCRAPER BLADES X 3 - amzn.to/30HyePG
SANDING ATTACHMENT WITH PADS - amzn.to/3hwcz3g
CIRCULAR SAW BLADES 5 PACK - amzn.to/2YFIANI
LONG SCRAPER BLADE (Cutting Insulation) - amzn.to/39SBImD
LONG INSULATION CUTTER BLADE - amzn.to/3ayeKQQ
DEWALT GROUT REMOVAL BLADE - amzn.to/36QoXqT
TIMESTAMPS
0:00 Introduction
0:11 Diamond Blade Uses
1:32 Long Scraper Insulation cutter Blade uses
2:13 Metal Cutting Blade uses
3:15 Wood & Plastic Blade Uses
5:17 Circular Blade Uses
5:37 Sanding Attachment
6:34 Carton & Carpet Cutter Blade Uses
7:30 Scraper Blade Uses
9:51 Outro
Disclaimer - The Amazon link is an affiliate link and I may receive a very small commission if the item is purchased through the link, but it does not cost you anything. This helps support my channel and enables me to keep posting free content on a weekly basis.
LINKS To all the production equipment that I use -
MOVAVI Editing software that I use - store.movavi.com/order/produc...
RODE Smartlav+ AUDIO Lavalier Microphone for smartphone - amzn.to/3dSLN2h
RODE SC1 Microphone extension lead - amzn.to/366jrih
DJI OSMO 3 GIMBAL - amzn.to/3bAM4VX
JOBY GRIPTIGHT phone holder - amzn.to/2z6Hj9x
70" Camera tripod - amzn.to/2z35qpx
Epidemic sound music and sound effects - www.epidemicsound.com/referra...
Tubebuddy software for new youtubers - www.tubebuddy.com/BACREN73
You can Donate to the channel here if any of my videos helped you in any way, this would be highly appreciated and also help me grow the channel in future paypal link paypal.me/bacrenproperty?loca...
- Thank you !
Thanks for watching and if you enjoyed the content, please consider subscribing to my channel / @bacrenfencing
to see more similar content in the future. This would mean a lot to me and be greatly appreciated 😊
#bacrenproperty #multitooluses #whattousemultitoolfor #howtousemultitool #dewaltmultitool #dewaltdcs355 #multitooldewalt #dewalt18vmultitool #waystouseamultitool #dewalt #dewaltxr
Please contact me (Barry) on the following email for any general or business related enquiries - bacrenproperty@gmail.com
@Bacrenfencing Жыл бұрын
Link to the multi tool here amzn.to/3uizoit
@Bacrenfencing Жыл бұрын
😎
@brianbrink1421 Жыл бұрын
Excellent video. No bullcrap about the history of the tool or anything like that. Just shows what it will do.
@Bacrenfencing Жыл бұрын
Thanks Brian !
@samueldavis5895 Жыл бұрын
There’s not a long history but yea that’s funny af 😂
@Foof0811 6 ай бұрын
Couldn't agree more with this comment I was weighing buying one of these and searched up "uses for oscillating tool" This video was literally exactly what I was hoping to find :) thank you
@cyndicaserta7096 Жыл бұрын
*Love this **MyBest.Tools** have the original dremel oscillating tool but it's corded which is fine in many instances but this is so versatile. Must have for any tool monger like me.*
@Bacrenfencing Жыл бұрын
Thanks for the comment 👍
@ccarmelo1979 9 ай бұрын
As an electrician that does strictly remodels this is an absolute essential tool. kzfaq.infoUgkx0vyBwjtx9GGOuiqUVT2sRoYqmDoNT_RI Being able to precision cut any material with a light weight tool is priceless.I upgraded to this Dewalt 20v from a competitor's 12v. The Dewalt 20v is just as light as the competitor's 12v. I am extremely pleased with the overall performance and battery life of this tool. As far as oscillators go, they just aren't very ergonomic tools. The dewalt oscillators have an offset handle that do make them somewhat more ergonomic than the competitors' oscillators.
@Bacrenfencing 9 ай бұрын
Thanks !
@garyguest1885 2 жыл бұрын
A very informative video. I don’t usually need to watch these but after buying a Dewalt 355 I wanted to be 100% sure I knew what the blades were capable of. Brilliant👍🏻
@Bacrenfencing 2 жыл бұрын
I am glad it was helpful Gary, thanks for the comment 👍😀
@patjames8762 Жыл бұрын
Those blades can be taken seriously BRO
@ellivisionbytheartistandre6467 Жыл бұрын
Have you been impressed by it up to now?
@michab8535 Жыл бұрын
@@Bacrenfencing vb
@MAYBEMAYBS Жыл бұрын
I wish all instructional videos were like this. Engaging and clearly shot. ❤
@Bacrenfencing Жыл бұрын
Ah, thanks for he lovely comment 😎👍
@MC-pg2ko 11 ай бұрын
Just got my Dewalt DCS355 kit and was delighted to find your comprehensive demo and a great selection of tunes; bopped all the way through it. All setup and ready for action. Thank you 😍
@Bacrenfencing 11 ай бұрын
Great, someone that likes my taste in music.........a very rare thing 😂 Hope you enjoy using your new multi tool !
@peter-gn8ey 3 жыл бұрын
a cool hack I saw a while back was where someone had attached a standard hooked stanley blade (the type you use for lino and carpet) to his multi tool so it cut on a pulling action rather than a pushing action - seemed a good idea for cutting softer/flexible materials.
@Bacrenfencing 3 жыл бұрын
That would be good Peter as opposed to having to push, easier to control. The carpet / carton blade is pretty good though albeit you have to push ! Cheers for the hack 👍😃
@bboggio28 3 жыл бұрын
Saw this too using hook blades for a razor knife.
@manueldagan844 2 жыл бұрын
You got right to the point without saying a word, thank you. In some dewalt videos people talk way to much and demonstrate very little.
@Bacrenfencing 2 жыл бұрын
I appreciate that! Thanks for the comment 👍
@tonyc7352 Жыл бұрын
I can't think of a better video that shows so many uses and with no nonsense, just one after the other. Thank you. I'm going to check out your other videos.
@Bacrenfencing Жыл бұрын
Awesome! Thank you!
@utubeape Жыл бұрын
I use the scraper tool a lot when decorating. I would love a delta sanding pad made from diamond grit so it can be used wet for all kinds of grinding and polishing into corners
@Bacrenfencing Жыл бұрын
Thanks for the comment Nick !
@titansmgr Жыл бұрын
Great video. I just ordered a tool kit that included this. I wasn't aware of all of it's great uses. Thank you!
@Bacrenfencing Жыл бұрын
Glad it was helpful! Thanks for the comment
@uriel-heavensguardian8949 2 жыл бұрын
Awesome video!!!!! I’m new to the multi tool. Your video is helping me understand the functions of this tool. Thanks.
@Bacrenfencing 2 жыл бұрын
Glad it was helpful!
@jhurtado7564 3 жыл бұрын
Thank you for this video.. I’m a new owner and the possibilities are endless!! Glad I found this video
@Bacrenfencing 3 жыл бұрын
Glad it was helpful!
@garygullikson6349 Жыл бұрын
Thanks for the tips on cutting screws and bolts. Will use slowest speed and move blade side to side.
@Bacrenfencing Жыл бұрын
👍😎
@tyleredwards6489 11 ай бұрын
Im new to the whole diy building and what not. Ive got pretry much every other tool except this one. After watching this video im definitely adding one to my collection with all of those accessories.
@Bacrenfencing 11 ай бұрын
Awesome, thank you! I am sure you will enjoy owning the new multi tool !
@warwickclark2143 3 жыл бұрын
Love this - thanks, legend
@Bacrenfencing 3 жыл бұрын
Thanks Warwick, glad you liked the video !
@luifranco1457 Жыл бұрын
Hands down the most useful video I’ve seen on this tool (and I’ve watched many). Subscribed!
@Bacrenfencing Жыл бұрын
Awesome, thank you!
@tommyarmour68 2 жыл бұрын
who would of known. So many uses, great video
@Bacrenfencing 2 жыл бұрын
Thanks for the comment 👍😎
@Johnconno Жыл бұрын
I'm Victor Kyam! I liked this razor so much that I bought the company! Shaves as close as a blade or your money back!
@Bacrenfencing Жыл бұрын
Thanks for the comment
@zachstephens2561 2 жыл бұрын
This is my favorite tool I use at work. I use this and my DeWalt impact more than anything daily.
@Bacrenfencing 2 жыл бұрын
Same here! Thanks for the comment Zach 👍
@booboosman1 3 жыл бұрын
Just got the same tool but a Milwaukee gotta get me the other cutting blades for cutting nails, this is awesome.
@Bacrenfencing 3 жыл бұрын
Thanks 👍
@dushk0 2 жыл бұрын
Just pull them out?
@jhors7777 2 жыл бұрын
Thank you for posting this helpful video
@Bacrenfencing 2 жыл бұрын
Glad it was helpful! 👍
@illsmackudown 5 күн бұрын
Thanks
@Bacrenfencing 4 күн бұрын
No problem !
@pastori70 Жыл бұрын
I learned a lot from this video, thanks!
@Bacrenfencing Жыл бұрын
Glad it was helpful!
@Historynut73 2 жыл бұрын
Amazing..I'm sold...
@Bacrenfencing 2 жыл бұрын
You and me both Mike - thanks for the comment 👍
@andre1987eph 2 жыл бұрын
Great instructional video
@Bacrenfencing 2 жыл бұрын
Thank you!
@chaseramirez7682 2 жыл бұрын
Great video! Thank you
@Bacrenfencing 2 жыл бұрын
Glad you liked it and thanks for the comment - much appreciated 👍
@safehandsprojects 2 жыл бұрын
liked the 100mm kingspan insulation cutter
@Bacrenfencing 2 жыл бұрын
Thanks Nick, it is actually a scraping tool but I use it for cutting Kingspan, it does an excellent job of that. Thanks for the comment.
@drrous9917 7 ай бұрын
Great job on the video. Straight to the point with nonsense talking.
@Bacrenfencing 7 ай бұрын
Thanks for the comment !
@joejackson9986 Жыл бұрын
great video. no bs...just footage of the tool in action. thank you!
@Bacrenfencing Жыл бұрын
Glad you liked it Joe, thanks for the comment
@mayakovlog6074 3 жыл бұрын
Woww.. very nice a lot of blade in one machine..
@Bacrenfencing 3 жыл бұрын
Yes, thanks for the comment, much appreciated 😎
@dantoth1386 Жыл бұрын
That’s why I have switched over to Ridgid tool for the last 15+ years . Lifetime warranty on them as long as they are registered which is not a problem. They have replaced anything I have had a problem with , thank you “ Ridgid “ you have a lifetime customer.
@Bacrenfencing Жыл бұрын
Lifetime warranty - you can't argue with that !
@evamundt5415 7 ай бұрын
this is a very useful and informative video. subscribed!
@Bacrenfencing 7 ай бұрын
Glad it was helpful! and thanks for the sub - appreciated !
@talk2kev 3 жыл бұрын
A couple of things I have used them for (1) With metal blade cutting old toilet flange bolts out to remove toilet also the same blade to remove old caulking around that toilet. (2) I took a old worn blade with a angle grinder cut out and sharpened a hook blade for cutting roofing. (3) cut garage door and door sweep thick rubber weather stripping .
@Bacrenfencing 3 жыл бұрын
Thanks Kevin, yes, there are loads of uses, I just tried to illustrate some of the uses that I use it for but there are probably hundreds of other uses for this tool. Thanks for the comment
@blessedking1111 3 ай бұрын
4:47 i needed this 2 weeks ago
@Bacrenfencing 3 ай бұрын
Thanks for the comment
@n3tfury Жыл бұрын
Sold! great video thanks
@Bacrenfencing Жыл бұрын
Awesome! Thank you!
@jukio02 3 жыл бұрын
Cool. I'm just going to get this and a drill, and that's it for my power tools.
@Bacrenfencing 3 жыл бұрын
Good choice!
@ShirleyAerial 3 жыл бұрын
I honestly didn’t realize all the thing you could do with the multi tool!
@Bacrenfencing 3 жыл бұрын
Yas Benny, they have SO many uses ! 👍
@ShirleyAerial 3 жыл бұрын
@@Bacrenfencing I was just going to buy a jig saw or sawsall to cut a hole in a water valve box. But I'd rather buy a multi tool cause I would be able to use it more in the future.
@bluegill2030 2 жыл бұрын
I just bought a Dewalt one and surprisingly how much I use it for woodworking
@Bacrenfencing 2 жыл бұрын
Great, yes they are really useful , thanks for the comment
@bigburly4057 Жыл бұрын
Nice vid,., I was looking for cutting metal exhaust pipe
@Bacrenfencing Жыл бұрын
Glad you liked it and yes, this will cut through the exhaust pipe no problem !
@tonyvillena1985 Жыл бұрын
I just purchased I hope it work’s great
@Bacrenfencing Жыл бұрын
You won't be disappointed Tony, it is a very handy tool !
@cesarlui7927 6 ай бұрын
Great video
@Bacrenfencing 6 ай бұрын
Glad you enjoyed it
@PharmerJohn1 Жыл бұрын
Thankl you so much for not gibbering on and on. I LOVE the House Music.
@Bacrenfencing Жыл бұрын
Thanks for the comment !
@paul_my_plumbs_uk 3 жыл бұрын
👍👍👍 Stay safe hope you're well
@Bacrenfencing 3 жыл бұрын
Cheers Paul, All good here, just busy juggling child care, work, etc etc.........you know the script. Hope you are well too !
@capone_rd_809 Жыл бұрын
Great video just ordered this tool and I'm amazed to see what it can do and that it's not just for cutting drywall, Cheers!
@Bacrenfencing Жыл бұрын
Hope you enjoy it!
@craigroyce4472 2 жыл бұрын
works great on bone too
@Bacrenfencing 2 жыл бұрын
Human or animal 😂👍
@luisinhoens90 2 жыл бұрын
I use my multitool for cutting through PVC and plywood, but also for detail sanding. Will do drywall once I get my new home later this year. Very handy tool indeed
@Bacrenfencing 2 жыл бұрын
Sounds great, yes they are very handy indeed - thanks for the comment 👍
@kabalah888 3 жыл бұрын
good video and good music too!!!!
@Bacrenfencing 3 жыл бұрын
Glad you enjoyed it 👍
@danielshevlin4159 2 жыл бұрын
@@Bacrenfencing Whats that first track bruv?
@glenschumannGlensWorkshop 3 жыл бұрын
Thanks.
@Bacrenfencing 3 жыл бұрын
You're welcome 👍
@MyScallan 3 жыл бұрын
Great vid. Any particular brand of blades you find are good? I struggle to know which ones to go with every time I need new ones. None are that cheap either. Thanks.
@Bacrenfencing 3 жыл бұрын
Hi Simon, I just tend to buy blades as I need them for specific jobs. I usually just hunt about on Ebay for good deals. I use wood and plastic cutting blades the most, so just tend to buy packs of 10 and use them as consumables. I spend more on the diamond blades and usually use Dewalt. It really depends on your specific application but for me personally, I just buy cheap packs of 10. Hope this helps ?
@micahned 2 жыл бұрын
Simon, check out project farm
@volcomguy51 3 жыл бұрын
I own the new Milwaukee M18 Fuel oscillating multi-tool and it barely gets used in my line of work but at home and side work, it's a beast! Very loud unfortunately but it gets the work done.
@Bacrenfencing 3 жыл бұрын
Hey DB, Hope you are well buddy. Yes, the Dewalt is quite loud as well, but it is SO handy in many a situation - I use it all the time . I suppose there are better multi tools out there, but I love the Dewalt mainly because of the quick change blade system 👍 Thanks for the comment 😃
@volcomguy51 3 жыл бұрын
@@Bacrenfencing I had to use it recent to remove a stripped bolt to pop off a telecom cabinet and it took it off cleanly! Never thought it would be clutch in the field! Love what you do and share!
@Bacrenfencing 3 жыл бұрын
@@volcomguy51 Yeh, I have a similar job when cutting out rusted toilet bolts, this tool does the job cleanly - similar to your telecom cabinet bolt. "CLUTCH"........I need to start using that - love it !!
@volcomguy51 3 жыл бұрын
@@Bacrenfencing Happy to share "clutch" with you brother!
@robgormley1317 3 жыл бұрын
Hi Barry I have the same tool and absolutely love it’s versatility, have you tried the smart blades yet?
@Bacrenfencing 3 жыл бұрын
Hi Rob, No, I have not tried the Smart blades, are they any good ? I just tend to buy cheap blades from ebay and Amazon but have a couple of Dewalt diamond blades which are OK. I should really invest in better blades, especially the metal cutting blades as they seem to dull down pretty quickly. I will take a look at the smart blades.
@nerdiousmaximus2222 2 жыл бұрын
Project Farm did a great review of bi-metal blades. Spoiler alert: mo money doesn’t mean mo better
@diyanzhelev2518 2 жыл бұрын
Nice!
@Bacrenfencing 2 жыл бұрын
Thank you! Cheers!
@iandrain.7277 3 жыл бұрын
Great tool at times I wonder what I'd do without it ....man you can cut straight 🤣..... Did I see see a wee Makita battery in the background when you were removing the dried wood glue 🤣🤣
@Bacrenfencing 3 жыл бұрын
Haha Ian, I detect a little sarcasm.........my cutting is as squint as the next guys 😂 Yes, Makita battery in the background, I have a cordless Makita track saw and radio and have to say that I am more and more impressed with Makita and Milwaukee these days.........I have had a really bad experience with Dewalt recently, will upload a video about it once I get a chance 👍
@iandrain.7277 3 жыл бұрын
@@Bacrenfencing brilliant bug chap..... No yer cutting 10 times better than mine the best laff is I worked in a timber yard in paisley for 6 years 🤣🤣
@Bacrenfencing 3 жыл бұрын
@@iandrain.7277 I have fond memories of Paisley, how's Feeeeegie these days - it was rough as hell when I was there in the early 90's
@johnalbino1957 5 ай бұрын
Man I seriously enjoyed the music... and the video. 😎Who is playing? Y'all need to play this video in a good stereo.
@Bacrenfencing 5 ай бұрын
Thanks, glad you enjoyed it ! 👍
@robertmills4980 2 жыл бұрын
Very nice I saw they were a blades for removing grout are there any blades that'll actually cut tile like ceramic tile
@Bacrenfencing 2 жыл бұрын
You can use the grout removal diamond blades to cut or notch small tiles but I would not recommend it. It would take far too long. Best to stick with an actual tile cutter or angle grinder for that.
@micahned 2 жыл бұрын
You could maybe cut some very soft ceramic with a diamond abrasive blade but tile definitely does not do well with vibration and trying to cut it with a multitool will be nothing but heartache. Even the best cuts won't have a clean edge which is critical. There are tools much better suited for the task. Angle grinder, snap cutter, wet saw, dry saw, tile nippers, etc.
@milesk7465 2 жыл бұрын
I’ve been wondering how to cut cardboard! Haha great vid though
@Bacrenfencing 2 жыл бұрын
Lol.........thanks for the comment 😎
@SPQRxUSAxNUSA Жыл бұрын
And this is how I found out I need an oscillating tool.
@Bacrenfencing Жыл бұрын
Yes, they are great tools with so many uses
@amcken 9 ай бұрын
Can you use the sanding attachment to smooth out metal like copper? There's an etching I want to remove. Thanks!
@Bacrenfencing 9 ай бұрын
I'm not sure, I have never tried, but I assume it could
@MontyVideo969 10 ай бұрын
Another *No Nonsense* but creative video. Great work - thanks for your time! (Love the subscribe hint too).
@Bacrenfencing 10 ай бұрын
Awesome, thank you!
@420WEED69 2 жыл бұрын
3:30 👌BEAUTIFUL MUSIC
@Bacrenfencing 2 жыл бұрын
Thanks for the comment, glad you enjoyed it 👍😀
@HandsONreviews4u Жыл бұрын
I have this tool also....Dewalt may have made a mistake creating this tool this is because it does it ALLL😀👍
@Bacrenfencing Жыл бұрын
Very true! 😀👍
@vincepeacham7292 Жыл бұрын
Hi, will the wood/metal blade that cuts through nails. cut through old screws ok, thanks.
@Bacrenfencing Жыл бұрын
Screws are a little harder to cut through due to their composition, so probably best with a blade solely intended for metal. I hope this helps ?
@clausdan6916 2 жыл бұрын
Muy importante es ocupar la herramienta de corte adecuada al material. Ocupe una para corte de metal marca Diablo, en fibrocemento, se gasto completamente a los 60cm de corte lineal.
@Bacrenfencing 2 жыл бұрын
Thanks for the comment 😀
@djloopz56 Жыл бұрын
Fab video! Just bought one and wondered if you only buy Dewalt blades, if not, which brand would you recommend as an good economical alternative
@Bacrenfencing Жыл бұрын
Thanks, no I use other blades which are cheaper, I think there are links in the description. Ebay or Amazon are good for blades !
@djloopz56 Жыл бұрын
@@Bacrenfencing thank you! That’s great as they wear out quite quick lol
@armindo54 3 жыл бұрын
Are the Faithful multitool blades, specifically the insulation cutting blades shown in the video available in the United States?
@Bacrenfencing 3 жыл бұрын
I'm not sure Armindo, I am based in the UK and get them from Amazon or Ebay. 👍
@neilthesupplier 7 ай бұрын
How do you smoothen the PVC pipe, and Is a Jig saw good to cut a large circle in a Glued wooden board? I am making a game board. I like you template tool. Never thought of it for that.
@Bacrenfencing 7 ай бұрын
Yes, a jigsaw is your best option for cutting a large circle
@thebackwoodsmechanic5029 Жыл бұрын
dropping in to show support
@Bacrenfencing Жыл бұрын
Cheers buddy ! 👍
@lifeintornadoalley Жыл бұрын
On my 3rd multi from harbor freight. 2 returns. 1 unreturnable. What's a good entry level model? Remodeling the whole house. Roofing trusses to flooring joists. Everything in-between. Can't be bothered to keep slowing down over cheap plastic
@Bacrenfencing Жыл бұрын
You can't go wrong with the Dewalt in my opinion and it is not too expensive. Comes with a 3 year extended warranty if you register the tool.
@lifeintornadoalley Жыл бұрын
@@Bacrenfencing thanks for the help! First time user too. Kinda got the feel already. Was skeptical at first thinking it'd jump around alot, found different positions remedy that with practice. And definitely a game changer for diy people like me. Anything that's a multi tool is something to check out if you don't want to haul a huge box around.
@Bacrenfencing Жыл бұрын
👍
@SW-di5ky 2 жыл бұрын
can anyone tell me the best tool to use to cut into polywall white high shine board. its harder than i thought and the circular saw is cutting it but in chips.... and flyin all over the place. i was thinking of buying this in the Ryobi brand since i have all there tools so far. pleasse help!!!!
@Bacrenfencing 2 жыл бұрын
Try this half circle blade like the one in this pack amzn.to/3DAJEVW , I have cut plastic bath oanels with it and it does a great job
@maniacalmonster2293 Жыл бұрын
I know these tools are great but I never knew they can write also!
@Bacrenfencing Жыл бұрын
Now you know 😂👍
@escapetherace1943 8 ай бұрын
I'm on the fence with getting this type of tool. It excels at plunge cuts but I feel like a 1 handed recip saw can do it all, at least starting with a drill hole
@Bacrenfencing 8 ай бұрын
Trust me, the multi tool will be far more useful than a single recip saw.
@david-dishoncartwright8808 2 жыл бұрын
Nice video. What is the name of the song around the 6 minute mark
@Bacrenfencing 2 жыл бұрын
Thanks it's called TOO LONG by a band called SNAKE CITY - available on Epidemic sound.
@mts0628 Ай бұрын
Interesting but just like when you have a hammer everything starts looking like a nail. There's a right tool for the right job.
@Bacrenfencing Ай бұрын
Thanks for the comment
@williamwang2047 2 жыл бұрын
Hi I m new to this tool and is now looking at Multi tool, can I know the model of this ? And also why so many different model or voltage etc, any difference or? Thanks for any feedback
@williamwang2047 2 жыл бұрын
Also I have battery makita, if I buy Makita brand , can also do everything you do in video ?
@Bacrenfencing 2 жыл бұрын
Yes, the makita multi tool will do everything that I showed in this video with the Dewalt, you just need to get an assortment of different blades for different tasks 👍
@Bacrenfencing 2 жыл бұрын
I left a link in the description to this tool. Thanks
@kevinohara8671 8 ай бұрын
I attach mine to my attache case lol
@Bacrenfencing 8 ай бұрын
Thanks for the comment
@sayagarapan1686 Жыл бұрын
Looks like it does quite a lot of damage to the material when removing adhesives. Maybe a broader blade or some way to hold it more level without following dips
@Bacrenfencing Жыл бұрын
Yes, a broader blade would be best. I was not careful when doing it, it was just a demonstration.
@lancerudy9934 3 жыл бұрын
Will it do carpet glued to concrete floor?
@Bacrenfencing 3 жыл бұрын
Yes, thanks for the comment.
@micahned 2 жыл бұрын
Lance what do you mean by "do"? Carpet adhesive is stronger than the fibers on the bottom side of carpet or carpet pad so the first step will always be ripping up the carpet which leaves the glue on the floor. If you're asking if this is the best tool for removing large amounts of glue from a concrete slab then the answer is definitely no, although it could come in handy in corners or under cabinets.
@cookdislander4372 Жыл бұрын
5:48 Subscribed :)
@Bacrenfencing Жыл бұрын
Thanks !
@mattseymour8637 3 жыл бұрын
Does the multi purpose blade come with the multi tool?
@Bacrenfencing 3 жыл бұрын
It depends which retailer you buy it from. I just bought the bare tool and bought the blades separately but some packages offer the batteries and blades included.
@mattseymour8637 3 жыл бұрын
@@Bacrenfencing well I ordered mine from eBay with the T stack box and blades included so will this blade come with it?
@Bacrenfencing 3 жыл бұрын
@@mattseymour8637 I think you should get one if it comes supplied with different blades. If not, they are readily available on Ebay and Amazon.
@mattseymour8637 3 жыл бұрын
@@Bacrenfencing I think you probably right. Will see what comes with it when it arrives. Is there alot if vibration with the tool or not so bad?
@lkahele1 2 жыл бұрын
What blade would you use to cut melamine press wood furniture?
@Bacrenfencing 2 жыл бұрын
I am not sure to be honest, I am not familiar with that material.
@ShadowboltChoco 3 жыл бұрын
Used a dewalt metal cutting blade for nails with this tool, only for it to be defeated, causing the blade teeth to wear down and the motor to overheat and shut off. Any ideas what the hell I did wrong? The nails I was cutting were smaller than the one in this video and didn't cut anywhere near as easy.
@Bacrenfencing 3 жыл бұрын
Were the nails stainless steel perhaps ? Stainless is a very hard material to cut..........it sounds like you encountered stainless nails or a similar material.
@ShadowboltChoco 3 жыл бұрын
@@Bacrenfencing yes stainless steel for sure. I got the job done but man it was tough and I destroyed my blade.
@Bacrenfencing 3 жыл бұрын
@@ShadowboltChoco Thought so, stainless is a pain to cut, especially with a multi tool - at least you got it done though !
@micahned 2 жыл бұрын
Choco you used the wrong blade, check out the carbide blades from Ezarc or Diablo
@wannabemusician7849 6 ай бұрын
Does it cut tiles ???
@Bacrenfencing 6 ай бұрын
no
@user-fu1wl9ht6f 2 жыл бұрын
Ну теперь я умею работать реноватором )
@Bacrenfencing 2 жыл бұрын
Thanks 👍😎
@mgtfbluestreak3956 Жыл бұрын
I want one
@Bacrenfencing Жыл бұрын
😎👍
@Bacrenfencing 3 жыл бұрын
An updated version of my most popular video so far. Here I attempt to show the sheer versatility of the Dewalt Multi Tool - One of my most used tools. Hopefully this video gives an insight as to some of the uses that the multi tool can be used for. Please remember to give the video a like if you found it helpful at all - Thank you ! 👍
@user-vc8gv6mw3t 2 жыл бұрын
What blade can cut 5/8 inch drywall the fastest? I cut drywall 50~100 times(over 200 feet) a day.
@Bacrenfencing 2 жыл бұрын
I like these for drywall amzn.to/3IL9j1u
@user-vc8gv6mw3t 2 жыл бұрын
@@Bacrenfencing Thank you very much for your reply.
@Bacrenfencing 2 жыл бұрын
@@user-vc8gv6mw3t No problem, always good to hear from people !
@davebarnes1742 3 жыл бұрын
Only saw 2 opps cutting & grinding /sanding
@Bacrenfencing 3 жыл бұрын
OK.......Thanks for the comment
@micahned 2 жыл бұрын
Cutting, grinding, and sanding...I count 3 operations. Also those 3 operations encompass half of what most tradesmen do all day so exactly what point are you trying to mak
@darrenwilliams8844 Жыл бұрын
Can this be used at a bris?
@Bacrenfencing Жыл бұрын
What's a bris ?
@jamiewilliams7120 Жыл бұрын
The only issue I had with mine was because it is an oscillating tool it vibrates and DeWalt is not known for having good connections so that being said it vibrated all the wires loose on the inside and I had to go in and solder everything back together
@Bacrenfencing Жыл бұрын
Not had any issues with mine Jamie but thanks for the comment
@steviepham 3 жыл бұрын
What song is that at the end of the video?
@Bacrenfencing 3 жыл бұрын
It is called "remember this" by "The Flix" - it is available on epidemicsound.com
@chaselesser3191 3 жыл бұрын
Oscillating attachment to remove popcorn ceilings?
@Bacrenfencing 3 жыл бұрын
Probably be better with a larger tool for that, it would take forever with the multi tool - thanks for the comment 👍
@micahned 2 жыл бұрын
Chase are you really suggesting we tackle hundreds of sq ft of ceiling with a blade 2 inches wide? I wouldn't do that even if I was getting paid by the hour...
@chaselesser3191 2 жыл бұрын
@@micahned I think I meant if there was an attachment to remove popcorn. I’ve removed thousands of sq feet of popcorn ceiling. And I wouldn’t use a standard 2” for popcorn. But I would probably just use my drywall sander with a more aggressive pad. And go for a knock down texture for better noise isolation than a flat ceiling. And less work to try and patch rough areas.
@dmd406 2 жыл бұрын
I use angle grinder for most of my projects, and I don't feel safe using it. It's like I'm going to lose a finger. Now this, i am going to get one.
@Bacrenfencing 2 жыл бұрын
Thanks for the comment Donald, yes an angle grinder has its place but the multi tool can do so many tasks as hopefully I have demonstrated in the video. Thanks again for the comment and enjoy your multi tool when you get it 👍
@robertb.3651 Жыл бұрын
Angle grinders are only for real men ......
@HandsONreviews4u Жыл бұрын
What about a hand held oscillating tool the size of a chain saw that can cut down whole tree trunks? Imagine that putting the common chain saw out of business 👍or a much smaller version that vibrates like a kitchen knife that can cut vegetables meat fish and potatoes
@Bacrenfencing Жыл бұрын
Thanks for the comment
@ManishNewa 18 күн бұрын
Can we cut brick wall?
@Bacrenfencing 18 күн бұрын
No, best with an angle grinder or concrete cutting saw with a diamond blade for that.
@Oswee 2 жыл бұрын
Does the authors of most of the clips gave permission to be included in this video?
@Bacrenfencing 2 жыл бұрын
All the clips are filmed and owned by me, so yes I give myself permission 😜
@lukasibanda6730 Жыл бұрын
Can it make a hole in concrete?
@Bacrenfencing Жыл бұрын
No, it is not meant for that.
@dushk0 2 жыл бұрын
Just use pipe cutter for copper pipe and pull protruding nails out with pincers.
@Bacrenfencing 2 жыл бұрын
Very true, but what if you don't have those tools to hand ? This is where the multi tool comes in to its own as it is so versatile as a stand alone tool. Thanks for the comment
@ianjones8573 2 жыл бұрын
Do not forget most other Multi tools do the same job, my cheapy does all I need. Just buy good blades.
@Bacrenfencing 2 жыл бұрын
They do indeed Ian but I use the Dewalt due to the quick blade change feature. This saves a lot of hassle undoing blades with an allen key as is usual on most cheaper versions. Thanks for the comment 👍
The Honest Carpenter
Рет қаралды 1,4 МЛН
Академия здоровья
Рет қаралды 2 МЛН
ĂN VẶT TUỔI THƠ 2023
Рет қаралды 86 МЛН