Bottle Cutter With Variable Guide, No Blades

Рет қаралды 20,159

4 ай бұрын

Order Cutter: function3d.xyz/shop/
Tiktok: / function.3d
Instagram: / function.3d
Printables: www.printables.com/@function3d
3D printer used:
Creality K1 www.creality.com/es/products/...
Hardware used:
2x 608 RS bearings s.click.aliexpress.com/e/_Dmb...
3x M8 16x1.5 Washers s.click.aliexpress.com/e/_Dk3...
2x M8 Nylon Nuts s.click.aliexpress.com/e/_DeF...
5x M8 Nuts s.click.aliexpress.com/e/_Dlm...
2x M8x50mm Threaded Rod s.click.aliexpress.com/e/_DeT...
1x M8x30mm Threaded Rod s.click.aliexpress.com/e/_DeT...
1x 48mm M6 Rod
STL: www.printables.com/es/model/7...
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/avbe/night-in-kyoto
License code: V90QUVX0HRVUQHT4
#3dprinting
#3dprint
#crealityk1
#diy

Пікірлер: 54

@bithabr 4 ай бұрын

Thanks for such a detailed video of the assembly process! I'm going to make a cutter too. Yours is just super👍

@lajoyalobos2009 4 ай бұрын

Here in the US, 5/16" is a good substitute for 8mm threads if you have a difficult time finding them (for this project anyways). I didn't even have to resize anything in the slicer. I've had no issues on my cutter.

@function3D 4 ай бұрын

There are links in the description to the hardware

@frankdearr2772 3 ай бұрын

great topic, thanks 👍

@sirrodneyffing1 4 ай бұрын

Ace. Thanks.

@Jacob-ol3zb 4 ай бұрын

I must say, you have a lot of dedication to this recycling 3d printer filament thing. It’s rather impressive. I’m curious, why do you work so hard to do all of this?

@function3D 4 ай бұрын

I work for money

@OnceOnlyLap 4 ай бұрын

ㅋㅋㅋㅋ

@OnceOnlyLap 4 ай бұрын

당신의 채널을 굉장히 자주 시청하고 있습니다. 정말 기발하고 유용한 아이디어들이 많아요. 아주 놀랍습니다. 당신에게 많은 영향을 받고 있어요. 저도 페트병 재사용을 시도해 보려고 합니다. 어제 베어링이 도착했어요. 이걸 내가 해낼 수 있을지 상당히 궁금 합니다. 만일 성공한다면 영상을 촬영해 볼게요.

@alexanderscholz8855 4 ай бұрын

SMART!!!!!!!!!!!!!

@semihaltinpinar8443 4 ай бұрын

Great design! When you are printing with the PET filament do you dry it before? I've been having problems with moisture causing bad layer adhesion but haven't seen anyone drying their PET bottle filament.

@function3D 4 ай бұрын

I never dry my filaments, for me, humidity and 3D printing have no relation

@jacobnowatzke4371 4 ай бұрын

70-75C for a few hours will do the trick. I use a large air tight tupperware bin, to which I've added a mesh container filled with silica dessicant that dries at the same time as the filament. PET is very hygroscopic- I live in a very humid climate at sea level, so I'm always fighting it. I do 170°F for about five hours after pultruding. Drying like this drastically improves my print quality.

@rickroller5742 4 ай бұрын

@@function3Dsome plastic absorbed moisture

@function3D 4 ай бұрын

@@rickroller5742 I didn't talk about plastic not absorbing moisture, whether it does or doesn't in my experience is irrelevant to 3D printing

@rickroller5742 4 ай бұрын

@@function3D depends on the plastic most normal ones don't absorb much

@luislugo2546 4 ай бұрын

Awesome work, man!!! I managed put in the works my first "frankenstein" Petalot (It's a mess hehehe) I love the bottle cutter with bearings, it's so easy and clean cuts.Question, this cutter version with the adjustable threaded rod isn't available to print?

@luislugo2546 4 ай бұрын

Oh, sorry!!! Just saw the Printables link. Thanks! Keep the awesome work, Master!!!

@function3D 4 ай бұрын

Link in the description

@hernancurras 4 ай бұрын

que buen trabajo... construyendo algunos recicladores, aca en buenos aires! :) que medida de ancho debería quedarme la cinta de PET para construir filamento?

@function3D 4 ай бұрын

El ancho no es una preferencia si no una "obligación" dictada por el grosor de la pared de la botella function3d.xyz/faqs/?Display_FAQ=267

@hernancurras 4 ай бұрын

@@function3D brillante... muchas gracias, no noté ese FAQ... por cierto, vi varias botellas que procesaste... paredes planas, lisas y con resultados muy consistentes, una envidia. Voy a ver como copiar la tecnica con botellas con formatos bastante mas particulares (i.e. cocacola)

@temmietopegold 4 ай бұрын

when printing the recycled filament how strong is ti compared to PLA and PETG, i never have good interlayer adhesion

@function3D 3 ай бұрын

Prints slow, with considerable high flow and without layer fan whenever possible

@jayjaynet Ай бұрын

Should I expand the plastic bottles before slicing them?

@function3D Ай бұрын

Only if the bottle has manufacturing corrugations

@arturomendez7945 Ай бұрын

Thanks for sharing. Why have you print it in PETG?

@function3D Ай бұрын

It is PET not PETG, I don't see any other way to do it if not with the same filament that you do with that cutter

@arturomendez7945 Ай бұрын

@@function3D you mean cutter block is printed in PET itself? How many grams/meters/bottles were used?

@function3D Ай бұрын

@@arturomendez7945 The nearly 50 machines and many more cutters I have printed on PET bottle filament. The cutter block takes 9 meters, 28 grams or one bottle.

@Serkunny 4 ай бұрын

What is the dremel that you used?

@function3D 4 ай бұрын

A very cheap one from AliExpress

@user-xi8wr7zp8x 4 ай бұрын

the 608 RS bearings works for the other machine or not? and very good job bro

@function3D 4 ай бұрын

Yes, the 608 is the same for the filament manufacturing machine

@user-xi8wr7zp8x 4 ай бұрын

@@function3D Thanks for the quick reply, greetings from Argentina

@function3D 4 ай бұрын

@@user-xi8wr7zp8x De nada, saludos desde España

@user-xi8wr7zp8x 4 ай бұрын

@@function3D and last question (sorry for the inconvenience ). Do Abec 7 608zz Bearings serve?

@function3D 4 ай бұрын

@@user-xi8wr7zp8x If they are 608zz or 608rs (zz or rs I think defines the type of seal they use) they should fit since 608 should completely define the dimensions, which are 8x22x7 mm

@koenraadschmitz9748 Ай бұрын

Did order your bottle cutter, and paid including shipment cost I hope it is all trustable, thanks in advance

@function3D Ай бұрын

You can be sure of that

@kajin4j 13 күн бұрын

Anyone has the problem that the stripes keeps on getting wider? Please help …. Thank you..

@charyschen7856 3 ай бұрын

How to control the width of the pet strip？

@function3D 3 ай бұрын

This is a skill that needs to be developed, observe and modify your ways of doing it, pull with the strip horizontal and upwards except for the first turn

@OnceOnlyLap 4 ай бұрын

감사합니다.

@function3D 4 ай бұрын

Thank you very much!

@koenraadschmitz9748 Ай бұрын

I have this problem it cuts the bottle, but the bottle creeps up, what can be the reason?

@function3D Ай бұрын

1. bottle is not flat 2. bearing are not sharp 3. The contraption not well adjusted 4. You are not pulling upward and toward you. 5. You have not yet practiced enough to develop this skill ....

@koenraadschmitz9748 Ай бұрын

@@function3D thanks I will look in to it