Don't forget the tube connectors!!!1!!

The worst time when your hair is long enough to annoy you but too short to tie back.

i agree Bring the Mullet back. Everything is a Circle.

The DCR of the inductors is not that much of an issue. It is the inductance that needs to be measured. And a cap upgrade will take you further than anything. Let me know how it all turns out.

@@dannyrichie9743 Hi Danny. All I can say is, there are no words for this. I am absolutely astonished by the increase on performance. Unfathomable to me how these speakers simply took into their second wind in its sound. Outrageous, these speakers are true modern contenders of anything I've listened to in my life. The level of detail retrieval is absurd, they sound like headphones. First day listening I thought something had gone wrong because I had listening fatigue after listening for about an hour or so. My hearing was starting to feel duller. I couldn't understand why since everything sounded so clean and spacious, and measurements in were simply great! Well, I what I noticed is that I was played for over an hour at RIDICULOUSLY LOUD levels and I did not felt it was that loud at all. I've never had such experience before where it is past 90dB and I don't mind it. I don't like listening loud regularly. Mills resistors, solen air core inductors, mundorf/jantzen capacitors is what I found available around here. Still sounds natural, tone is rather similar but textures of metal are much more real and sparkly now, decay is brilliant. Bass was not punchy at all, it was soft and tuneful. Now it kicks, it is still tuneful, but it's incredibly fast and I can hear a lot of things going on in the drums membranes. It's lavish detail, simply lavish. Those TAD transducers are far more than I ever thought they would be, and they are vintage. Wow... Thank you for all you have shared so people like me can understand better this world and enjoy music like we deeply do. Best regards! I'd love to upload some pictures somewhere to share. Suggestions?

I think I'm gonna do the upgrade on my 602s. Do you own these as well?

All of the Celestion SL series are Some of the best speakers ever made! If we could only get parts!

@@DrRyman totally agree!

Check this one out: kzfaq.info/get/bejne/nNOTocqDydOYm5s.html

Check out my last video on the Maggie 1.6 and 1.7 models.

Some of them are.

602s have been my daily drivers for 22 years now. I'm gonna do the upgrade. I love them.

@@fcamiolahave you done the upgrade> did you like the result?

In Sweden we call it hockeyfrilla or hockeyhairstyle in english. Maybe because a lot of players in the late 80's and early 90's had this hairstyle. Just check out the picture of a young Jaromir Jagr 😁 : www.chicagotribune.com/sports/ct-flames-jaromir-jagr-on-waivers-20180128-story.html

Hey Danny , love your show. Ever offered a kit for the little Minimus 7. About the most popular speaker ever with solid cabinet and decent drivers in need of proper crossover and terminals.

@@edwardbalboa5528 It's not my idea I got the idea from some KEF speakers. The upper med or lower treble sounds better through a tweeter than the woofer. Woofer is too big to reproduce like 2 khz. But a tweeter can do it cos it's light. It's effectively lowering the crossover frequency a bit. Some tweeters are suitable for it and some aren't.

I can pick up a pair with a center speaker for $500. Is that a good buy?

So far we've done some MMG's the 1.6'sand the 1.7's.

He made a night and day difference with my 1.7i

@@ufarkingicehole glad to hear that you are delighted with the results. Would you mind describing in a little more detail how the sound changed? I’m guessing the crossover was improved, no cabinets to dampen 😁

@@shahidyt Mr Danny bypassed the crossover all together. He measured the frequency response and ohm loads with and after he worked his magic. It originally measured pretty awful. After a little experimenting the clarity of the speaker completely opened up. It was pretty extreme. He made adjustments then we did an A /B comparison. It was almost like someone had a wet blanket over the original. I really was kind of shocked. I really want to add his H Frame subs to go with them but money is a little tight right now. I also heard his Nxtreme set up. Holy cow. Mr Danny is a hell of a nice guy. If you are ever traveling through northern Texas you should hit him up.

@@ufarkingicehole thanks fitrana the feedback. I hope he gets his hands on a pair of LRS soon, I’m from the U.K., so popping over with a pair of LRS strapped to my back is a no goer. I’m waiting on the fuse bypass kit and silver jumpers from Mike at OCD HIFI Guy, they are held up in the international post system. Hope there is a night and day difference with them too

Did you ever get a price?

Did you do it?

No active crossovers have their own limitations and short comings. And most of the higher end systems are all passive.

I have to get further away to measure accurately below that. And I can't do that in the room.

Someone will have to send one in.

Yes we can provide you with an actual crossover for them that I showed in this video and everything you need.

They are about half the price of a decent binding post and the price includes the male ends. A good set of spades can be $39 in some cases just on their own. So the tube connectors are a bargain.

No.

Clearwave.

Oh yes, I can't stand anything harsh or bright.

I need an address for a shipping quote.

@@dannyrichie9743 Fazantstraat 7, 1771CP, Wieringerwerf The Netherlands. Thx

If the components dont fit

@@ufarkingicehole An engineer from UofW made speakers and left the crossover outside. I didn't keep them because I liked more crispness on top but they were great speakers. Now I'm wondering if a different crossover could've made the difference that I was hoping for. It was a long time ago.

@@johnmcbarron7282 just my humble opinion... you can make a good many changes by altering the crossover of any speaker. It depends on a ton of factors such as gear being used, what was the driver made from, also what was the design of the said driver? You can change alot but you can only do so much. For example, I really dont like metal drivers and some people who love a little bite cant get enough. I've heard of some designers who managed to get a metal driver to chill out a bit but it seems to me it would have been better to try something different all together. I hope this makes sense. One more thing, I have heard of people designing electronics laid out a certain way as to prevent unwanted frequency disturbances. I suppose that could be another reason to install crossovers separately from the actual cabinets (again size restraints). I'm not sure how much weight this carries but I've heard of it.

@@ufarkingicehole I'm thinking I'd like those speakers back. :-(

@@ufarkingicehole Check out this vid. He addressed not putting the boards in the box. start at 15:40 kzfaq.info/get/bejne/aL59gtV7mZ6VhXU.html

No, it remains unchanged.

We are still sorting it out. I think a setting on the camera must have changed. We worked on correcting earlier today. I'm still learning the whole camera thing.

I think I do.

@@dannyrichie9743 fine

If their designers really were that great then we wouldn't be seeing all of the problems with them and having to fix them.

Danny is a snakeoil salesman plain an simple. I mean why buy a speaker in a certain price range (let's say $300) if you are just gonna modify it with one of these kits (average price is about $250). If you want better/different sound just step up to a $500 speaker. I can't believe people still fall for this BS.

Yeah ok buddy. Everything ever made was perfect, and Danny likes to waste all of his time doing this for a joke. Seriously bro, grow up.

@@fcamiola Danny isn't wasting his time Frank. There's serious money to be made from selling 'upgrades'.