I've had this press for years and love it. But I've gotta pickup those split limb adapters

Ultra-helpful video, thank you for making it!! I really like your homemade wooden bow holder idea too!! Awesome sauce!!

Just straight to the point.... Sincerely, thank you very much for your time!

That is about a perfect how-to video. Just what I was looking for. Thank you.

My idiot friend dry fired my bow, anyway, got the press . I've used it 2 times in 3 year's Outstanding piece of gear

I had no clue these existed. Super cool.

Maybe you said this at some point and I missed it, but I would suggest removing your string stop bar (usually a small screw or 2) because the cable is putting a good amount of lateral pressure on it when you press your bow. It only take a minute to remove it and reinstall it, better safe than sorry.

I always put a little bit of cardboard between the L Brackets and the cables, just stops any rubbing or damage when the bow is being pressed initially.

Great information. First time I’ve ever seen a portable press used. I’ve always taken my bow to a shop but the more I hunt the backcountry, the more I see a need for a portable press and a few extra parts back at the truck.

Thanks for the video, it helped me to decide which bow press to buy. I'm getting one of those. I almost bought the wrong bow press.

Ha Ha! was looking for a press to press the exact same bow out in the field :) Thanks !

You should make a video on your homemade stand

Thank you

That’s a really cool bow press!

Perfect Explanation! Thank you! Subbed!

very helpful - thanks for uploading!

Thanks for the help

tks for the help

Great explanation

Thankyou

Excellent! I used to own a bowpress when they 1st came out but bows r different now. The drill & c-clamp r nice tips. Thanks, Merry Xmas 😁

I’m glad I found your video 😊 as I was considering buying the bow press the same thing as you showed in your video on eBay as I would not see the point of spending €1,000 or more on a big ass bow press just to change the bow strings or the peep sight 😵‍💫

Would you do a video on how you built your homemade bow holder? Thanks so much!

Excellent informative video

I have the same on and it works awesome. I had to go with the wider brackets to fit my bow. One thing that will make it so you don't have to use a drill is to back out your limb bolts to reduce the poundage. My Halon 32 came with a recommendation to do that anyway when pressing it. I am able to hand turn it with no difficulties.

I can see those split limb adapters sliding off the end of the limb, and the bow blowing up. Doesn't look for anything close to parallel limbs or more.

Thanks, I just wish they had stops on both sides to use for a crossbow. Don't understand why it's not available!

excellent thanks

Lube the threads

Really liked your DIY bow holder video. However I do have a nice OMP bow holder that works well. I don't have plans of getting a bow press since I don't have a Prime dealer in my area anymore to give me free replacement strings. Not sure of the politics behind this but I have 3 Prime bows & 2 could use the factory string systems. I think I might be interested in this if I can figure out which arms to buy with that 6" model. One Prime Centergy that I really like doesn't have split limbs so I'm not sure which parts to use with this. I never had Covid but I'm still suffering with the effects that it had in the bow shop specifically with the free strings for life that I'm the 1st time owner of under their warranty. I can do anything on a bow but Prime just doesn't send out replacement strings to s customer & the bow shop is no longer an option.

Measurements on the wood bow holder?

The press works really well but it's just so slow and tedious to set a peep with the correct rotation. You might have to press the bow 3 or more times to get it right and it can take hours...

I got mine a week ago to do some work on my reign 7 and I can't get it to work,I've wound the limbs down but the amount of pressure I have to apply to even get a little bit of pressure off the string was that great it bent the L brackets, it worked fine on my hoyts bow but when it came to my bowtech it had no hope of compressing the limbs enough to do any work on the bow what so ever.

What's the chances of bracket slipping ogg the bow limbs ?

So glad i came across this video. I have a reign 6 which doesn't have as wide of a limb as the sr6, will the brackets used in the video work with my reign?

I’ve got a Hoyt Maxxis 31 and the bow string has partially come off one of the cams and I got the bow press to try to get it fixed

Would this work on a older bowtech? Like a btx or rpm ? Because I see that the limb has a different back part of the limb where the cam is at

We have 3 different bows that I would be working on. A Hoyt Carbon Element G3, a Mission Craze, and an Infinite Edge. Will the press with L bracket combo work for each of those, or would I need different brackets?

I’m having trouble with it slipping off

How much pass parallel on limbs will these presses will work on?

Any tips if the rubber fingers keep slipping off my SR6?

Hey man, my Mathews V3X 29 has some rubber things on them to make it easier to press with a traditional bow press, and the limbs don't arch outward like you'd think they would.. Do u think it'll still work with a portable press?

I noticed you pressed a Realm SR6, which size L bracket are you using? 3/4" or the 1 1/8". I have a Realm X.

do you know if you can use this press for the hoy torrex?

In general, are cheaper bow presses more dangerous than ones that are more expensive?

I’m new to archery but i have a old bowtech tribute with a single limb, would this still work? I would like to buy this press just for the simplicity!

Bummer: I have no idea what the press is attached to, or what happens when its threaded rod is turned. Something was skipped.

Would this work on a PSE Stinger Maxx [2020 model]

How did you make the little holder with the wood?

Can it be used on a crossbow

hey can it be used in a crossbow?

Will this work on a 2016 Hoyt Defiant.

Will it work on a elite ritual?

You having all of that extra equipment kind of defeats the purpose of a portable bow press, doesn't it? 😂

Don't use it.not safe.i almost loose my finger.ended up in the hospital

Far too much talking. Long and boring.