I think this is one of the best and easiest photo ornaments tutorial that I have ever seen, and I am going to use your method to make my memorial photos. love this very much! great job!

Thank you so much for this step by step and very detailed tutorial! Finally, I found someone who explains something in every detail!! 😁👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

LOVE this tutorial! I have been looking for something similar to a memory gift! This is perfect!

Thank you for sharing this beautiful floating ornament 😘 I love it 😍 I always wanted to learn how to diy this 👍🏻 I am going to definitely try this... I am so new to my cricut I have so much to learn- but you explain this so well... I would love to see more diys that the cricut machine can create. Have a bless day...

Thank you, thank you, thank you. What an easy tutorial. You made it very simple. Super good tutorial . Thank you for sharing this with us.

By far one of the best tutorials step by step thank so much

LOVE!! You are wonderful in how you explain the how to's....excellent gift of teaching you have. Thank you!

Came over from off the mat to watch this. Fabulous job! Subscribing now!! Would love more tutorials!

Your tutorials are great! Can’t wait to try these!

Thank you for this!! I have a customer wanting some in memory ornaments and I tried putting the memory quote on with vinyl. It was a disaster! You made my day with this tutorial 😁!!

To the point...exactly what I was looking for..thank you so much for your time!! Xoxo

Very nice, direct and to the point. Thank you!!

you definitely made it dummy proof!!!...so i should be able to do this!!!.....thank you so mush!!!

This was amazingly helpful! THANK YOU! THANK YOU!!!

Awesome tutorial!!! Thanks for sharing!!!

Great tutorial! I can definitely do this. Thank you soo.... much!

Thanks for making it so easy to follow. New subscriber. Can’t wait to see more. I hope to start using mine more.

Woooah!🤯 when she sliced the square into a circle!!!! I never you could do that!

Wow thank you so much new with all this but will definitely try this. Blessings

This was so awesome thank you I’ve been wanting to try this

Very clear and informative video. Thank You.

Thank you so much. It worked by flatten it

Wonderful video. Might give it s try. Thanks

Great video very detailed. Thank you

Thank you so much! Making these today for a couple mom volunteers for my son's cross country team. Do you know the cut settings for the silhouette? Love this tutorial! THANKS AGAIN!

Awesome! Thanks for sharing

Loved it, thank you.

Great video. I will try it.

Awesome job!!!

wow i see this is an old video but love it. simple easy to follow i want to go get me some ornaments lol

Good tutorial. Thank you.

Wow that's awesome 👍

awesome tutorial! thanks

Brilliant!!!

Great tutorial, thank you! My question is, when you say "standard size" ornament, what size is that exactly? I am using a 3.25" round ornament so am trying to figure out what size to make my image in order for it to fit.

mind blown! thx!

Great video!

you made this so easy trying tomorrow

Love this thank you

Do you have a video showing how to add the picture with the words?

So great thank you

Thank you I will look now.

You tutorial is easy to follow. I thank you for that. My pics are printing dark and it’s are to see. One pic is hands holding a red rose but it’s hard to see and it’s 3”. Any tips?

Thank you so much for this video

cute idea!

love it thank u

Great tutorial!! Have a question! When i do the print and cut it doesn’t cut around the complete circle is there something I’m doing wrong?

Thank you for the tutorial I am having a problem, my tab keeps cutting off of the circle. How can I correct this

ty for this tutorial xoxoxo

your 2-1/2" insert for the floating ornaments I cut and made but what size if the ornament itself so they fit into disc

Hi, thanks for the tutorial. I have cut 4 ornaments out so far and 2 of them for some odd reason it doesn't cut a centered round circle, 1 cut into the picture on the left side & outside the picture on the right side (which left a blank spot) and the 2nd sheet did the opposite, it cut outside of the picture on the left side and cut into the picture on the right side of the circle. It's very frustrating and this transparency is not cheap and I have wasted 2 sheets now. Do you have any suggestions on how to get it to cut all the way around the ornaments print out? Thanks for your time.

I have the 80mm disc ornaments. By any chance do you know the size I need my template to be for those?

Have you done anything with the photos outside the ornament?

This is a GREAT tutorial! Thank you!! I notice on some of the first ornaments that you have vinyl on the outside. They are GORGEOUS!! Any pointers on how to do this with the curvature of the ornament without making creases or air bubbles? Any chance you could possibly do a tutorial on that? :)

Penny pincher here, can you get just one memory disc out of a sheet of transparency film, or can you use it a second time in the bottom area to get another disc?

what setting on printer do you use when printing?

Have a cricut air2. I have used the Foil Acetate and the Transparency. The cricut is cutting the circle twice and the stem once. Do you have any other suggestions? Thank You

Thanks adorable!

I have a question about the transparent film. Once you cut it. How do you use the rest of the film. I have the same problem with printable vinyl. I cut a piece out then the rest is thrown away.

What type of cuter do you use?

Hi! Can u please tell me what kind of printer you are using?? I have an Epson ET-2720 for sublimation and then an HP Deseret. I've tried to use both and the ink won't dry. On the HP everything just disappears

What printer are you using?

I use to make these back in the 90s without the vinyl

If the ball is 2.69 how do i set the setting. Is it 2 in height .69 in width?

Thank You

Can you put it on glass/

Great tutorial. You can hear you so many do tutorials and you cannot hear them. Thanks

Please Explain the program you are using ?

what size are you makeing please

How did u do the in Memory one???

How did they actually turn out on the tree? My ornaments you cant really see the pictures.

Love your video, very helpful. I have a question. I can print fine but when I go to cut it, with the settings on custom, then acetate, it cuts three times and then cuts the tab off. Any suggestions? Thank you

What size is the ornament? Does this project fit any size ornament?

I’m having a hard time with getting the picture to be able to be sliced I saved it as a print and it’s still not letting me slice it. Any advice

How can I get rid of the black square around the round ornament templet?

Hi. I am doing everything you are showing, however the cricut is cutting the neck off my picture. What am I doing wrong? Please help.

When I see the image on the print then cut mat it shows the stem of the ornament. Then when I go to print it it is not cut out the stem just the entire circle I did attach it in my layers what am I doing wrong?

Hello. I need your help! I make an ornament before following your steps and now I keep getting an error saying that the machine cannot read the cut sensory marks. Any suggestions?…

Great video everything worked but you can't see my picture very well what can I do to make that better?

when cutting it cut around and the square on top 2 times then the 3rd time it cut the complet circle and cut thru the square on top...any suggestions on how to fix that .

Is there a way to make the colors more vibrant? The one I tried you can barely make out the images unless it is against a white background....I am using disc ornaments, so I wanted to glitter the back half, but then I cannot make out the picture at all

How do i print does it have to be a wifi printer i dont know how to print it plz help

Can I ask what kinda printer you have? Your colors are so pretty

How about transparency with words message on it and no picture?

HI I JUST PRINTED MINE, THEY LOOK AWESOME, HOWEVER THE TIP WAS CUT, AND I WELDED IT. WHAT DO I DO?

Hi! What is the measurement that you used for the neck of the ornament? Thanks :)

Could you please do a tutorial on the memory ball.

This is so great!!!! How do I save my image as only a print? I don't see that as an option. It just saves it automatically as a print and cut

Just wondering what photo program you are using to print the picture on the acetate, as I need to get a program, great video

So you did not use the Cricut to do it?

Love your presentation! So nice. However, has anyone experienced the error message "Image too large" to print? It may be because I'm using a template that has 4 cut-outs, but I've only attached a single photo. Frustrating :-(

How do you get more than one ornament on the film so you don't waste the rest of the film?

can you share your templet.

Could you do one in the disc michaels ornaments pls.

Can you do a video showing the memory one with the words?

can you please tell me how you got the photo uploaded into DS. I went into DS clicked upload, browsed my photos clicked the one I wanted and opened it. Then I chose complex and when I clicked continue all I got was a black box no picture.. HELP.....

What printer is best I tried doing it on my printer and it comes out smudge

Could you make a video showing how to put the words on the ornament? Sounds simple but I have spent 4 hours today trying to get the words on the ball.

Which Cricut did you use in the video? Does it matter?

will you make a video with the words printed next to photo