How do you get more than one ornament on the film so you don't waste the rest of the film?
@gradyc1712 жыл бұрын
Awesome tutorial!!! Thanks for sharing!!!
@hannibal_lecter2 жыл бұрын
ty for this tutorial xoxoxo
@1craftaholic2 жыл бұрын
How can I get rid of the black square around the round ornament templet?
@pampellerite49852 жыл бұрын
When I see the image on the print then cut mat it shows the stem of the ornament. Then when I go to print it it is not cut out the stem just the entire circle I did attach it in my layers what am I doing wrong?
@IMDEDE22 жыл бұрын
Hello. I need your help! I make an ornament before following your steps and now I keep getting an error saying that the machine cannot read the cut sensory marks. Any suggestions?…
@tawnylee78822 жыл бұрын
My photos are coming out crappy but my font is fine what am I doing wrong
@BoyMomCentral2 жыл бұрын
Make sure your printer is set to the highest quality and that your photos are good quality
@tawnylee78822 жыл бұрын
@@BoyMomCentral when I try the tab is set in the middle and it won’t slide over to best
@doreenmclemore68312 жыл бұрын
What size bulb did you use
@jennifermartinez-em2lc2 жыл бұрын
Mine didn't want to do the cut part it said cut sensor marks on the print could no be detected
@BoyMomCentral2 жыл бұрын
I have been having this problem so much! I even bought a new machine thinking that was problem. I think it’s definitely a Cricut problem not a user problem.
@coachjulie082 жыл бұрын
Have a cricut air2. I have used the Foil Acetate and the Transparency. The cricut is cutting the circle twice and the stem once. Do you have any other suggestions? Thank You
@donnabaum57062 жыл бұрын
Could you please do a tutorial on the memory ball.
@BoyMomCentral2 жыл бұрын
There is one ❤️
@normazaharioudakis1152 жыл бұрын
Can you put it on glass/
@audrivega2 жыл бұрын
My cricut doesn't read the marks 🥺😭 can someone please help
@elizabethspenrath15392 жыл бұрын
Love this thank you
@pamieb39913 жыл бұрын
Please Explain the program you are using ?
@saracook70893 жыл бұрын
I have a question about the transparent film. Once you cut it. How do you use the rest of the film. I have the same problem with printable vinyl. I cut a piece out then the rest is thrown away.
@72susanabonita3 жыл бұрын
What size is the ornament? Does this project fit any size ornament?
@72susanabonita3 жыл бұрын
Hello, Question. Why when i send it to print my screen doesn't look like yours on the screen the pic is on one mat and the ornament is in another. Why? What I'm doing wrong?? TIA
@BoyMomCentral3 жыл бұрын
Flatten them all as one ❤️
@vivianroman893 жыл бұрын
I love the video. I'm trying to make it but when I print the image and wording, my wording shows very light to where I'm not able to see the wording. Unless I put white paper behind, even at that its still very hard to see. can you reply back with what it can be I'm doing wrong. please and thank you!
@octaviuspompilus87393 жыл бұрын
How did they actually turn out on the tree? My ornaments you cant really see the pictures.
@cookiemulheron32243 жыл бұрын
your 2-1/2" insert for the floating ornaments I cut and made but what size if the ornament itself so they fit into disc
@12kkustoms743 жыл бұрын
When I do go to cut I get and error message saying it can’t be read or to use a white background. Any tips?
@aimeegunz3 жыл бұрын
Same issue here
@BoyMomCentral3 жыл бұрын
Hmmm? I honestly do jot know on that one. Do you have an eco tank by chance?
@rosevwarner3 жыл бұрын
Try darkening the square lines around the circle with a sharpie.
@loriejenkins55943 жыл бұрын
My cricut won't cut the transparency because it can't recognize where it needs to cut? Cricut support tells me that I need to watch a blogger to find out what they do to trick the machine... any ideas?
@haleywright84023 жыл бұрын
I cut on transparency in my cricut that’s the setting I use for these
@rosevwarner3 жыл бұрын
Darken the lines of the square with a sharpie.
@mandiediva9253 жыл бұрын
Awesome job!!!
@chenamartinez083 жыл бұрын
I’m having a hard time with getting the picture to be able to be sliced I saved it as a print and it’s still not letting me slice it. Any advice
@ErickaColon3 жыл бұрын
Thank you for this video I’m have problem with when I send it to make nothing is showing up
@andreagomez19933 жыл бұрын
Hi! Can u please tell me what kind of printer you are using?? I have an Epson ET-2720 for sublimation and then an HP Deseret. I've tried to use both and the ink won't dry. On the HP everything just disappears
@ritaflorespelayo52023 жыл бұрын
I don’t have a Facebook so how else can they be ordered?
I use to make these back in the 90s without the vinyl
@daduckess3 жыл бұрын
Woooah!🤯 when she sliced the square into a circle!!!! I never you could do that!
@celindal.montes69123 жыл бұрын
Thank you so much for this video
@gloriarodri793 жыл бұрын
love it thank u
@pgreeneyespamela3 жыл бұрын
Loved it, thank you.
@sonjaimckoy39133 жыл бұрын
you made this so easy trying tomorrow
@marionshipman6213 жыл бұрын
Could you do one in the disc michaels ornaments pls.
@BoyMomCentral3 жыл бұрын
Marion Shipman yes sir! Just adjust your sizing 😁
@yazminrivera72814 жыл бұрын
Wow thank you so much new with all this but will definitely try this. Blessings
@joecornejo74544 жыл бұрын
You said ladies, us man like craft to. lol Also, what grid sand paper did you use. We don't need to know the brand. Just the grid. Great job, thank you so much for this video
@BoyMomCentral4 жыл бұрын
Joe Cornejo I honestly have no idea 🤦🏻♀️. It is pretty fine. It was just whatever I found in my dad’s shed lol.
@chriskozen35544 жыл бұрын
awesome tutorial! thanks
@Jovon10154 жыл бұрын
So you did not use the Cricut to do it?
@luminesicore2464 жыл бұрын
mine keeps on smudging
@cougar14324 жыл бұрын
I have the 80mm disc ornaments. By any chance do you know the size I need my template to be for those?
@TheCraftySensei4 жыл бұрын
Thanks for making it so easy to follow. New subscriber. Can’t wait to see more. I hope to start using mine more.
@ismaeldavila56864 жыл бұрын
When i'm trying to print it starts printing then stops. How can I fix that?
@brittanyerickson25893 жыл бұрын
I have the same issue
@jessicablankenship64054 жыл бұрын
Thank you so much for this step by step and very detailed tutorial! Finally, I found someone who explains something in every detail!! 😁👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
@jessigoldfinger74794 жыл бұрын
This is so great!!!! How do I save my image as only a print? I don't see that as an option. It just saves it automatically as a print and cut
@BoyMomCentral4 жыл бұрын
Yes. Its only either cut. Or print and cut. You'll want to save as print and cut 😁.
@jessigoldfinger74794 жыл бұрын
@@BoyMomCentral yes I know that but there is not option for me to choose. Where do I get to choose that option? Please help lol
@BoyMomCentral4 жыл бұрын
The very last page/step of uploading your photo.
@jessigoldfinger74794 жыл бұрын
@@BoyMomCentral It just says print and cut or just cut
@BoyMomCentral4 жыл бұрын
Right choose print and cut
@robertowens38214 жыл бұрын
Wow that's awesome 👍
@aprilmost4 жыл бұрын
will you make a video with the words printed next to photo