BQ8030 RESET - Karosium Guide - Reset Cycle Count, Read and Write EEPROM - Using FX2LP
Рет қаралды 7,942
Жыл бұрынCopyright Disclaimer:
The content presented in this video may include information, diagrams, or methods obtained from publicly available sources, forums, or platforms in the field of electronics. While efforts have been made to ensure compliance with copyright and fair use, if any copyright owner believes that their work has been used without proper permission, please contact us, and we will address the matter promptly.
Educational Purpose Statement:
This video is intended for educational purposes, providing insights into electronic components, circuits, or related topics. The goal is to share knowledge, assist learners, and contribute to the understanding of electronics. Any demonstrations or discussions are conducted with the utmost respect for ethical and lawful practices. If you have any questions or concerns, feel free to reach out. Thanks to Karosium www.karosium.com/
Change FCC : • BQ8030 RESET - CHANGE ...
Laptop battery data retrieval and reset with Arduino Videos
1. • Laptop battery data re...
2. • Laptop battery data re...
3. • Laptop battery data re...
BQ8030 RESET - Karosium Guide - Reset Cycle Count, Read and Write EEPROM - Using FX2LP
I Appreciate the support from you all
my gpay : asudhakaran715@okaxis, asudhakaran715@oksbi
In this video, we are going to show you how to reset your BQ8030 Karosium Guide using the FX2LP Cypress. This will help you to reset the cycle count, read and write the EEPROM, and lots more.
If you are having problems with your BQ8030 Karosium Guide, or just need to know how to use the FX2LP Cypress, then this video is for you! By the end of this video, you will know everything you need to know to reset your BQ8030 Karosium Guide.
SINGLE FILE : ckk.ai/smbus (if show error please comment)
HEX CALCULATOR : ckk.ai/HEXCALCULATOR
HEXTODECIMAL: ckk.ai/HEXTODEC
LINKS
Karosium Page : www.karosium.com/
SMBUS FX2LP: www.karosium.com/2016/08/smbus...
SMBUS FX2LP SOFTWARE:www.karosium.com/p/smbusb.html
BQ8030 : www.karosium.com/2016/08/hacki...
Driver
No driver needed on Linux or other *NIX.
Zadig Driver Installer can be used on Windows (WinUSB driver)
zadig.akeo.ie/
Software
Source code and binaries: github.com/karosium/smbusb/re...
Library documentation: github.com/karosium/smbusb/tr...
Build instructions: github.com/karosium/smbusb
Hardware
Use the SCL/SDA/GND pins marked on the dev-board, NO external pull-up resistors necessary.
SMBusb - Open-source USB SMBus interface
SMBusb is a cheap, versatile, open-source SMBus (and I2C) USB interface.
Features
Based on the Cypress FX2LP dev-board shown above (available for ~$5 shipped on eBay)
Read/Write all standard SMBus transfer modes (byte, word, block)
Packet Error Checking (PEC) support
Arbitrary protocol functionality (allows for I2C or non-standard SMBus protocols)
Device and command discovery/probing
No extra components needed
Open source firmware and library
Multi-platform. (Tested on Linux and Windows)
Firmware is compiled into the library and loaded on-demand
@HarshadPatel Жыл бұрын
That is a very nice and good explanation. Can you make a video regarding all resistor values meaning for cycle count, it is 17 the very same way. other parameter values ..
@AnandakrishnaSudhakaran Жыл бұрын
Iam very happy to see a comment from a KZfaqr like you ❤❤.Thank you for your valuable comment, Some of your videos helped me to solve my issues. other parameters are available in respected CHIP pdf. But this is well explained in this pdf. I will make a video for you in 1 week. Now please read and understand this sbs-forum.org/specs/sbdat110.pdf .
@AnandakrishnaSudhakaran Жыл бұрын
You also have NLBA tool. Its a nice tool to play with laptop batteries. Iam planning to buy a raspberry pi to read modern batteries. NLBA,UBRT, REGEDIT .TBP all are expensive for me. I always stick to less expensive ways. So other people can also do it. VERY THANK YOU FOR WATCHING MY VIDEOS.
@HarshadPatel Жыл бұрын
@@AnandakrishnaSudhakaran Thank you so much. You have a piece of good knowledge as well as suitable to see the way of your explanations.
@AnandakrishnaSudhakaran Жыл бұрын
@@HarshadPatel it's a great honour to get a reply from you. Thank you sir
@HarshadPatel Жыл бұрын
@@AnandakrishnaSudhakaran very soon, you will get a new tool info on my channel
@tmxm7360 Жыл бұрын
great job!
@gaaragaara9785 Жыл бұрын
I thankyou sir very very good video
@hitmanyt2021 Жыл бұрын
also make a video on r2j240 and MAXIM chip 1781 and other too please how to reset it PF
@gaaragaara9785 Жыл бұрын
Sir good thank you
@AnandakrishnaSudhakaran Жыл бұрын
Desteğin için teşekkürler kardeşim. umarım iyisindir
@gaaragaara9785 Жыл бұрын
@@AnandakrishnaSudhakaranThere was an earthquake again today, I'm fine bro and it was very nice of you to think about Turkey and write something else in this video.
@AnandakrishnaSudhakaran Жыл бұрын
@@gaaragaara9785 aman aman kardeşim Tanrı seni korusun
@buddhimaamarasinghe9997 Жыл бұрын
Really glad for your knowledge, Is it possible to do this program using arduino? Thanks.
@AnandakrishnaSudhakaran Жыл бұрын
I don't have that much knowledge. But I tried so many Arduino codes to do this. but it is not working. Unlocking code for bq9003 is available with User Interface. Watch my other videos. May be there is code out there. No idea. Now am stuck in between cp2112 and raspberry pi. There is a free software available for Raspberry Pi and cp2112. If you know any code share me.
@16phoenixlast Жыл бұрын
Rasberry pi which model ?
@andreabertolini5609 25 күн бұрын
I downloaded all files but I don't find the .exe files. On Windows using build.bat not happens. Any ideas?
@AnandakrishnaSudhakaran 24 күн бұрын
May be u need to compile the files. Pls check github
@user-wf7bn6ch2l 2 ай бұрын
Good afternoon Such a question, the battery on the laptop stopped holding, the laptop turned off after a minute. I decided to disassemble the battery, the battery is based on bq8030+bq29330 chips. Connected via Arduino nano to the battery. I took the battery readings, unfortunately I did not save the output from the sketch. Next, using the video, I installed the sketch, launched the gui - it reads everything. Next, based on your video, I tried to change the battery access mode. This is register 00. At first it was 0x08. After manipulations from the video, 0x1717 was written there and the data is not read from the battery quite correctly. SmartBatteryHack basically reads the registers, but the incorrect battery temperature is displayed and the rest of the data is a little crooked.
@AnandakrishnaSudhakaran 2 ай бұрын
Do u have any other arduino codes to read the battery eeprom data? U r stuck in bootmode, Send 08 to 0x00 register
@user-wf7bn6ch2l 2 ай бұрын
@@AnandakrishnaSudhakaran I'm trying to write 08 to register 00.. When I press the "word" button, there is no change. If I select a byte or block it gives the following RX->] Block data write response 3D 00 05 85 03 00 08 01 96 [INFO] Reg.: 00 Data: 08 # of bytes written: 01 [] Word data received 3D 00 05 84 02 00 17 17 B9 [INFO] Reg.: 00 Data: 17 17
@hitmanyt2021 Жыл бұрын
i have a battery of chip 51f51 i cant clear its PF flag can you tell is there any pin to short it and clear PF flag
@AnandakrishnaSudhakaran Жыл бұрын
Its a risk to short ic pins, also data sheet is not available. I will try
@hitmanyt2021 Жыл бұрын
please use cp2112 or ev2300 please on r2j240 chips
@AnandakrishnaSudhakaran Жыл бұрын
Am sorry i dont have cp2112 and ev2300, both are expensive for me. You can find so many videos on internet with these two boards. But if I get a chance to byt cp2112 i will buy. Thanks for your comment
@hitmanyt2021 Жыл бұрын
@@AnandakrishnaSudhakaran no worries i order this device when i get i will let you know then you will help me please
@AnandakrishnaSudhakaran Жыл бұрын
@@hitmanyt2021 I will try my level best , thank you
@tmxm7360 Жыл бұрын
I have reset one battery successfully (LNV-45N103), with the second battery (LNV-45N1177) I have a problem, the fuse is ok but I don't have battery voltage + on the pin. I noticed some difference: battery unlocked successfully has the reading: Battery Status: 00c0 and the battery that doesn't work has: Battery Status: 03d0 I will add that in the second battery I had to connect the + voltage from the 12V battery (+) because I could not connect smbusb_scan and smbusb_sbsreport, (I did not use an external power supply, only 12v from 18650 cells) Does this battery status matter? maybe it's a blocked battery? how to unlock it?
@AnandakrishnaSudhakaran Жыл бұрын
Apply input voltage and check status of charging register
@tmxm7360 Жыл бұрын
@@AnandakrishnaSudhakaran how to do it? can you help me?
@Jaiting Жыл бұрын
you know if it would work with bq 8050??
@AnandakrishnaSudhakaran Жыл бұрын
Well yesterday i got one 8050, still on my table. Not responding to keys. If i get any access i will release a video. If you know any keys inform me. Thanks for your comment
@reuterric Жыл бұрын
Hi, have you ever unlocked a bq30z55? I'm looking for a howto.
@AnandakrishnaSudhakaran Жыл бұрын
Laptop or mavic dji battery?
@reuterric Жыл бұрын
@@AnandakrishnaSudhakaran Laptop battery
@AnandakrishnaSudhakaran Жыл бұрын
@@reuterric I tried with Cp2112 , successfully unlocked and reset one battery. But due to the fuse problem. Battery didnt give output. So make sure fuse is working, And where are you from? Search for dji mavi killer software with cp2112. You can find some tools, its actually for drone battery, but useful for laptop battery also. In my country cp2112 is expensive for me. So i tried with my friend in turkey. Other tools i dont know the condition. So i cannot guarantee you. Do it your own risk. Or EV2300 can do it. But costly hardware. But cp2112 is promising the unlock and reset. Give a try. I can provide you the related videos link
@question4552 Жыл бұрын
Will this work on BQ8055 aswell?
@AnandakrishnaSudhakaran Жыл бұрын
I dont know, if the chip share same data sheet, there is a chance. If you can try
@rsdynotune Жыл бұрын
will this work with TI EV2400 board instead of the Cyprus board?
@AnandakrishnaSudhakaran Жыл бұрын
For ev2400 ti software is available you can download it as free
@rsdynotune Жыл бұрын
@@AnandakrishnaSudhakaran When I do a SMBUSB_SCAN -a I get an error unable to open device. I am using a cyp board now...
@rsdynotune Жыл бұрын
And also which zadig driver should I use?
@AnandakrishnaSudhakaran Жыл бұрын
@@rsdynotune watch my video, usbk I think
@AnandakrishnaSudhakaran Жыл бұрын
@@rsdynotune watch my video, usbk I think
@anirudhkundu3567 Жыл бұрын
Please try decoding the macbook batteries as well
@AnandakrishnaSudhakaran Жыл бұрын
Yes. But I dont have mac battery. If I get a chance I will Try. thanks for your suggession
@anirudhkundu3567 Жыл бұрын
@@AnandakrishnaSudhakaran with BQ20Z451 Controller
@AnandakrishnaSudhakaran Жыл бұрын
@@anirudhkundu3567 if you want to try please refer this pdf www.google.com/url?sa=t&source=web&rct=j&url=www.ti.com/lit/pdf/sluu313&ved=2ahUKEwiOp7HUmOr-AhX8SmwGHXx8ApIQFnoECCUQAQ&sqi=2&usg=AOvVaw3vKq8ErvDxPTxuRR6GlNXK
@AnandakrishnaSudhakaran Жыл бұрын
@@anirudhkundu3567 i will also check
@anirudhkundu3567 Жыл бұрын
@@AnandakrishnaSudhakaran so the thing is i have a macbook and the battery was dead since one of the cell got dead and the total battery voltage was just 7.5 volts. I removed the specific cell and then changed that cells with the exact same cell from another dead battery. Now the voltage is 11.7 volts but the battery does not charge when connected to the macbook. Is there anyway you can help or guide me? Thanks!!
@user-sr3xg6wg5w 11 ай бұрын
Does anyone know if it will work with the BQ30Z55 ?
@AnandakrishnaSudhakaran 11 ай бұрын
Use dji battery killer if you have cp2112
@user-sr3xg6wg5w 11 ай бұрын
@@AnandakrishnaSudhakaran unfortunately i don't have cp2112 . Also this bms is in a laptop battery not a drone battery . And it is so sad my laptop battery didn't work even a full 2 years but i can power a big motor for hours without dropping too much voltage it's still giving 10.5 out of 10.8 ( 3 battery cells) even after 1 year removed from my laptop . Any way did you know what else i can do to fix this battery
@AnandakrishnaSudhakaran 11 ай бұрын
@@user-sr3xg6wg5w Dji battery killer software support bq30z55, i worked with that software on one of the laptop battery from msi laptop. Anyway which hardware do you have to connect to the pc and laptop battery? Fx2lp board does not support bq30z55 because the algorithm for the unlock is different. You need a 128bit key with sha 1 method to unlock bq30z55. Bq30z55 is widely used in many BMS boards. So dji battery killer is a free software and can be used to do almost anything with that software. Laptop or drone, our aim is to reset bq30z55 and reuse again. So cp2112 is the cheap option for this. Or need ev2300 or ev2400. Feel free to ask me any doubt.
@user-sr3xg6wg5w 11 ай бұрын
@@AnandakrishnaSudhakaran thank you very much for the fast reply !!! I have a USB Logic Analyzer - 24MHz/8-Channel i don't know if this device suitable for this purpose . Did you know if DJI killer software support any other adaptor except cp2112 like the CH341A USB to I2C/IIC/SPI/UART/TTL/ISP Serial adapter (EPP/MEM) this device it's looking great but I don't have find yet any driver or program that I can use it . Anyway if you do know any other adaptor that is working with the dji program it would help me a lot ... Thanks again you're doing amazing job !!!
@AnandakrishnaSudhakaran 11 ай бұрын
@@user-sr3xg6wg5w dji battery killer support only cp2112. Lpt to i2c software are available but you can only read the data. For other functions we need to buy the software. Do you have an arduino uno board? We can do some basic steps, like read status registers and do some unlock procedures. If you are lucky. You can unlock the battery with default keys, to read and write commands there is a free arduino code gui available. I have already done a video. My new video is still pending. It is unlocking bq4050. I will add your chip details. Just to try with arduino and if it works you can recover your battery. And from your writings I understand that your battery gives output, but if you put it in the laptop it will not last. This is due to the safety features like cycle count threshold, PF flags, Full charge capacity and some other flags. So what I am suggesting is to get an arduino UNO board if it is cheap there. Cp2112 is actually cheaper outside India. So if you are outside india buy cp2112. Just a suggestion. With ch341, no one actually did the magic. Am sorry I also don't have that board. Right now I am developing free software to read and write rom, clear errors, etc. Final thoughts get arduino uno and read data and understand the condition of your battery.
@mdaslamknl Жыл бұрын
Excellent From where we can buy this board Thanks
@AnandakrishnaSudhakaran Жыл бұрын
Which board you want to buy?
@mdaslamknl Жыл бұрын
@@AnandakrishnaSudhakaran The board which showing in this video I have dell latitude e6420 i changes cell but still it's showing battery not installed in bios dell latitude e6420 battery chip is A2168
@md.sibgatullahtouki2923 Жыл бұрын
password need for smbus folder.
@lovediy8784 Жыл бұрын
dear bro. can i reset dell m6800 battery bms with fx2lp? thanks
@AnandakrishnaSudhakaran Жыл бұрын
I cant tell without knowing the chip number. With fx2lp you can read any chip. But dealing with the unlock keys difficult for other chip. Do you have any other board like arduino, or cp2112 or fx2lp? Which one you have?
@lovediy8784 Жыл бұрын
@@AnandakrishnaSudhakaran the chip is BQ30420. I HAVE ARDUINO UNO R3, AND FX2LP, AND CP2112
@AnandakrishnaSudhakaran Жыл бұрын
@@lovediy8784 its better to use cp2112 with dji battery killer software, do you have it?
@AnandakrishnaSudhakaran Жыл бұрын
@@lovediy8784 watch my other video of cp2112 unlocking bq4050, you choose bq30z55 and try. If you need assistane please tell me. kzfaq.info/get/bejne/aLibpc5p0rS7k4U.html
@AnandakrishnaSudhakaran Жыл бұрын
Please feel free to contact me on insta or telegram
@ant-wd9vc 10 ай бұрын
can you help me find datasheet bms battery drone fimi witch marking code 6003-001 NQ97P
@AnandakrishnaSudhakaran 10 ай бұрын
Is it responding to any code?
Anandakrishna Sudhakaran
Рет қаралды 7 М.
ISSEI / いっせい
Рет қаралды 87 МЛН
AnythingAlexia
Рет қаралды 18 МЛН
deftdawg
Рет қаралды 90 М.
DiyRoby
Рет қаралды 146 М.
NipEmbedded
Рет қаралды 13 М.
Andromeda Research Labs
Рет қаралды 27 М.
Anandakrishna Sudhakaran
Рет қаралды 10 М.
MaviGadget
Рет қаралды 1,1 МЛН
Typecase
Рет қаралды 389 М.