Break Down and Anatomy of the Mikuni TM 28 Flat Side Carburetor with Pump Around Fuel System

Рет қаралды 16,585

3 жыл бұрын

This is the breakdown of the Mikuni Tm Flatside Carburetor used for 80cc Shifter Kart applications. This carburetor has the fuel system called a pump around installed, so the floats and needle valve are not used.
If you find value in the content of these videos, consider a donation to our project.
www.paypal.com/paypalme/norca...
Another video brought to you by www.norcalkarters.com/
You can also support our channel with purchases from our affiliate eBay Store -
Extra Kart Parts
rover.ebay.com/rover/1/711-53...
Norcal Karters on Facebook - / norcalkarters
Norcal Karters on Instagram - / norcalkarters

Пікірлер: 21

@mickeymouse9823 3 жыл бұрын

Cheer dude helped me a ton

@NorcalKarters 3 жыл бұрын

Glad it was helpful

@maniactrabas3818 3 жыл бұрын

Thanks brother👍

@NorcalKarters 3 жыл бұрын

Did the video help you out?

@maniactrabas3818 3 жыл бұрын

@@NorcalKarters yup.. because the Mikuni TM is a old carburator and now hard to search video about Mikuni TM.. And i find your video..

@thebatvoiceover 4 ай бұрын

Thanks for the great vid. BTW, I had my RD 400 bored and heads ported. Flatslides with pod filters and chambers. Now the motor won't pull higher rpms. What all would you change on the carbs?

@NorcalKarters 3 ай бұрын

I'd contact the shop that did the porting. Sometimes if you go big bore, you lose top rpms because your trading off for torque at the lower rpms.

@DEWclassicgarage6206 2 жыл бұрын

thanks for the perfect video. I have honda xl185 with un repairable carb. So does this works with my xl ? What do you think?

@NorcalKarters 2 жыл бұрын

If you have a bike application, this is not the right set up for your engine. This an adaptation for karting since we used mx engines and carbon karts. If your carb is shot, replace it.

@squirel6025 11 ай бұрын

What is benefit of return fuel system? Is this a 2 stroke thing?

@NorcalKarters 10 ай бұрын

It's not a two stroke thing, its using a gravity feed carburetor on a fuel pump system on an engine application that was not factory. In hindsight, the karting industry should have adapted carburetors that had changeable Needle and Seat valves and better fuel pumps with pressure set ups or shut offs.

@user-ce7yq1jb7d 3 жыл бұрын

Hi! I'm Alex Kharchuk from Ukraine. Tell me, please, does this system with scavenger tube and foam without float will work on pit bike in supermoto racing, when we deal with cornerings of carb? Which advantages it can give?

@NorcalKarters 3 жыл бұрын

Do you have carb issues with supermoto?

@user-ce7yq1jb7d 3 жыл бұрын

@@NorcalKarters not yet, but I am looking for the ways to improve and get max performance. That's why I started to look for another carby's and that's how I found your video. Engine is 4t 190cc 62*62mm, stock carb is PE type, I have used PWK 28mm type but thinking about FCR 28 or 33 cuz it has acceleration pump, which is must have on 4t engines

@NorcalKarters 3 жыл бұрын

@@user-ce7yq1jb7d I don't think this would be the right route for you. This was adapted in karting because the rules didn't allow us to use different type of carbs.