Videos like this keep the world turning. Thank you for taking the time to make it!

This is our second K-Classic. We had our first one for many years, so when we had to replace it, we wanted nothing else but this exact kzfaq.infoUgkxBrV-RbF5Nk0Rlt9i15aao-YMzqzTG8Vf model. We use it for about three people everyday in the morning. The taste and quick brew is one of the reasons we like it so much. There are so many choices of brands of coffee that we would grab what was on sale and test the different brands from there. I would definitely recommend trying different brands of coffee to find the ones you like the most because there are brands that quite frankly taste horrible.

Thank you for this! My machine was running water from the group head when I turned it on or tried to use the steam wand. I couldn’t get it into a repairman for a week and had no idea how to do it myself, but with your help I have fixed the problem! For those having a bit of trouble pulling it apart there are 2 screws under the front of the machine (under the control panel) that need to come out, and the back piece clips out in 3 spots on each side 😊

Use distilled water to never have to deal with maintenance like this. Thank you for this video!

Your video helped me fix mine, and even after six years of service, it still works like new! Thanks a lot!

Thanks this fixed my machine that wasn't frothing milk properly anymore

Absolute legend same hose was clogged on mine. Drill worked like a charm

Very useful. Indeed my coffee machine has the same problem. Solved the problem finally by watching your KZfaq video.

In case this helps someone, once you get the back panel off, to fix an airlock, remove the line that goes from the water feed (where the tank goes), both ends. Open the hot water valve by turning the hot water/steam selector to the hot water position. Push water through the system until water comes out by inserting a syringe in to the system (where you just removed the water line). This will push the air through the system. Do the same for the steam valve. Put it all back together, fill the water tank and test. Worked for me and could not find any videos showing this.

Thank you for your great explanation great job Peter.

Thankyou for reminding us all to dismantle stuff. 💪

Thanks for the video! I'm not sure if we have the same model, but I noticed on mine I needed to remove two screws not mentioned. They're on the front underneath the lip. One is near the wand and the other is in the tamper slot.

You're an angel. Thank you!

Legend its fixed!!! Used a drill bit too

Thanks! The machine works again

Guys please also check your inline filter between tank and pump mine was clogged and the cause of my blockage. Just blow into it to test. I tried to clean it but it didn’t make much difference so i reversed it and it flows freely until i can replace it.

Fantastic! Thanks so much!

I heard a pop while making coffee and water stopped pumping. The Steam Wand works perfectly though. Any ideas?

great video. I am also having issues with no pressure on the steam wand (the hot water is fine). How did you know that particular tube was the culprit for the steam and hot water? But it seems like you took the time to go through all the tubes that could easily be removed and claned?

Thank you for this video. You’ve got right to the heart of my problem. That little tube, I cannot blow through it at all. If you read this comment, do you have an idea where in Europe I can order this little tube?

New subscriber great video

Help! I’ve just done this and unclogged the pipe (thank you!!) but I can’t get the little pin back in? Any tips

I tried to do your video but my water now doesn't flow so I think its the clips for the hoses you didn't show how to reattach them. I really struggled to get them on properly.

Serious question, would this issue be eliminated if we only used distilled water that has no calcium? So it can’t build up calcium on the lines

Nice video Jim! Can you clarify what the symptoms were for this particular solution in this video? I have the same problem as Arthur Hoffman below (no water coming through the steam wand or hot water valve, but when you select either steam wand or hot water then all the water goes through the portafilter housing (where the coffee gets percolated). I'm not sure if the fix in your video here will solve my problem (or Arthurs). (I note your reply to Arthurs post below about removing the steam wand to check if its clogged. I removed the tip, and cleaned it thoroughly, but that wasn't the problem. Not sure how to remove the actual main pipe of the steam wand however)

We're you able to find replacement screws? Or possibly replacement tubes?

That's funny, the rust on yours looks exactly like what I have

Jim, I have a barista pro, similar problem, both stream and water coming out of drain, any ideas and were can a get diagrams for this Machine.

Any idea where can I buy the water tube? I couldn't find the same, only for other brands. Thank you for the video!

Hello, do you have a a video on repair or replacing the selector that does the espresso, drip hot water, or steam wand? Our selector is busted or there are some clogs that have stopped the steam wand from working all together and when we select steam wand, all the steam comes though the espresso part or into the catch at the bottom with nothing coming out of the want. We have poked the wand, descaled and cleaned the machine. Any help would be awesome!

Anyone know if this solves water purging errors on the 880 model? I've been trying to figure this out for months and have come up short.. Any help would be GREATLY appreciated! Also, I have yet to figure out how to dismantle my machine... :(

When you checked and cleaned did it always not build pressure or only sometimes? Mine is very sour regardless of the settings and sometimes randomly doesn’t build pressure

Hello i love your channel and I'm really hopeful you can help me. I have a Breville infuser with a serious problem. The Brew head works fine and I can get a single or double shot of espresso from it. But when I turn the selector knob to steam wand, nothing comes out of the steam one and it just steams through the Brew head and the water catch in the bottom. Also when I turn the selector backwards to hot water, hot water comes out of the Brew head and does not come out of the hot water dispenser. I watched your KZfaq video where it describes something similar and your fix was opening it up and cleaning a particular tube inside. I follow the instructions and open the back. That particular to be cleaned was not blocked in mine but I cleaned it anyway. I have no change in the system. Breville as kind as they are, offered to fix the whole thing for $255 if we mail it to them. I'm prepared to do any repair necessary by hand first before I ship it to them. My problem is I can't tell what's wrong with it. Have you seen this problem before? Do you have any suggestions of what I troubleshoot? If it's a water pump, I'll gladly replace that but I'm just not sure what the signs are that there's a problem with the water pump. Thank you for answering my email with any knowledge you could share. Art Hoffman

Hi . thank you for your video. My coffee maker is a Breville model BES870XL/B unfortunately the pressure does not rise. The gauge is working. The pump worked by taking out an output pipe from it and turning it on, and it had a good output pressure. All the pipes are clean, and I cleaned them twice with special tablets. The steam works and there is no problem. I still could not find the problem. If I find it, I have the possibility to repair it. I have two guesses, one is the external stream ring and casket and the other is the solenoid valve. In the first case, the device has no leaks at all, neither internal nor external pipes. Thank you for your advice in advance

Did you manage to fix the isssue after this? Thanks!

What kind of milk is the user using? I took my wand tip off, it is clear. However, I think my wand is clogged from inside becuase I am getting inconsistent to no pressure at all.

Thanks- I can hear the girl but not you so well - but thanks

If you make a how to video make it from the start not halfway through.

Ｐｒⓞм???

Try cleaning your machine now and then, cleaning the grinder, back flushing, and flushing out the wand. Your machine is filthy. The tray is dirty and your grinder looks horrible.