High Brake Light Replace Honda Odyssey

Рет қаралды 41,369

2 жыл бұрын

Why are lights so hard to change? Good news- this one isn't! That is when you watch this video. I'll show you how to replace the high mount brake light in your Honda Odyssey with the right bulb and the right tools!
Screw drivers $10 → amzn.to/3mgCgYA
Bulbs $2.50 → amzn.to/2YbJxAr
Gloves → $3
Facebook → briansmobile1
Instagram → briansmobile1
Twitter → briansmobile1
Disclaimer:
Due to factors beyond the control of briansmobile1, briansmobile1 assumes no liability for injury or property damage incurred as a result of the presentation of this information contained in this here video or any of the other briansmobile1 videos.
briansmobile1 recommends safe practices including the use of personal protective equipment such as eye protection, hearing protection, gloves, guards, shields, and respiratory protective devices when working on vehicles and or with tools seen or implied in this video.
I am an Amazon affiliate, Prime member, and general Amazon nut. I provide links to help you find the right stuff for the job quickly, confidently, and conveniently.
On behalf of myself, my wife and two kids, thanks for watching this video. I hope they've helped you tackle something you thought was a challenge and left you feeling like a power for win! And if nothing else, perhaps you had a laugh and were entertained!

Пікірлер: 67

@warrenfromga9945 2 жыл бұрын

The bonus footage at the end was beautiful. The video was good too but the end was special to me. Thanks Brian.

@carlmiller1034 2 жыл бұрын

Great step-by-step process on how to replace. Thanks for making and sharing. Thanks too for sharing the BFATE, and my sincere condolences to you, and the family and friends of your friend.

@amymcdaniel6060 Жыл бұрын

Thanks for your help! It took about 3 minutes to replace the bulb and it saved me a trip to the shop! Appreciate it!

@danielleejohnson5931 Жыл бұрын

Thanks Brian ! For 2 weeks I have been in fear of having to replace that bulb. You made it look so simple and now I'm excited to do it. Great video thanks so much!

@hfarms5779 Жыл бұрын

Simple, complete explanation for many of us who will do this only once.

@iamjayesh 2 жыл бұрын

Liked the bonus footage, its so cool.😎

@noneyabidness6655 2 жыл бұрын

I always have used a old clean T shirt an 90 % isopropyl alcohol to clean a bulb and to hold the bulb while installing . It gets off any oils or contamination and a cotton T shirt doesn't leave lint . Into a cleaned socket with dielectric grease used sparingly on contacts .

@EllisCurlee Жыл бұрын

I wish all how-to videos were as simple and clear as this. Subscribed.

@summerrain7569 Жыл бұрын

Thank you very much, the detail as to where to pop out the triangle cover is very helpful to avoid damage.

@richardlee754 2 жыл бұрын

Awesome video, needed to replace all of my brake bulbs today

@Macros1971 Жыл бұрын

Nice and easy, I was able to do it just as easily as in your video. Thanks so much!

@mfs353 2 жыл бұрын

great video brian, very helpful

@stevep5736 2 жыл бұрын

Thank you for your informational video. It helped . Thanks !!

@jimrussell-us 3 ай бұрын

Thanks for creating this plus the extra detail.

@windycitystevo2689 2 жыл бұрын

Great vid sir an as always love the BFATE

@user-hu7oy2tl6n 7 ай бұрын

Nice vid, thanks. easy to understand and nice tips. Good Job 🙂

@peterjohnson617 Жыл бұрын

Thank you, just the info I needed, simple & to the point.......peace,pj

@jenniferpeterson6452 7 ай бұрын

This worked great. Thanks so much!

@jamesu 2 жыл бұрын

Thanks for the video Brian

@mslioness805 25 күн бұрын

Thanks for the detailed video. What type of bulbs?

@jrhyno Жыл бұрын

Perfect description, thanks!

@robinsullivan3988 9 ай бұрын

Thank you!! Saved 80.00!!

@FJ80Coop 2 жыл бұрын

BFATE never disappoints...

@iamjayesh 2 жыл бұрын

Great work.

@mikeshem7665 2 жыл бұрын

Paragliding is so much fun. Any tips on replacing the clock spring on an 08 Honda Pilot Brother?

@anthonymolero9728 9 ай бұрын

Thanks Brian!

@tommystone7327 2 жыл бұрын

Cool bonus video 🙂

@kungfulender8733 2 жыл бұрын

Thank you. Easy peasy!

@DavidPisarek 2 жыл бұрын

Any thoughts on how to do this for a 5th gen odyssey (2018-2021)?

@a.person7825 Жыл бұрын

Nice! Especially the ending. Those of you that don’t know.. the Odyssey is designed and produced for North America. It’s built in Alabama.

@andrewhotchkiss2286 Жыл бұрын

Honda dealer wanted to charge me $78 to do this; I bought a 2-pack for $6 on Amazon and changed it myself in five minutes thanks to this video; it was even easier than I thought it would be

@rajgohil4985 7 ай бұрын

my god they gotta be Joking , $78 for this ? it's should only ne $25 max but you know how dealer goes, they always charge you extra, that's why you only go to dealer to buy the car 🤭

@fahadfaayz 11 ай бұрын

Thanks

@juanarguelles9290 Жыл бұрын

How do you remove the one for a 2016 Honda Pilot? Does it also have the same slits on the side? TIA.

@jdclark218 2 жыл бұрын

Hi Brian!

@carnivorousllama 2 жыл бұрын

This guy looks like Brian Laundrie, and his name is also Brian. Lawd have mercy!

@mwpahl38 2 жыл бұрын

That song at the end is my jam.

@SeanBZA 2 жыл бұрын

Yes, few people check lights at the rear, and yes a pack of those lamps is a good thing, as some vehicles take a set of three in that centre brake light assembly, and you only notice after the last one is blown.

@SignedOff402 2 жыл бұрын

How do ya check it if you are alone?

@briansmobile1 2 жыл бұрын

@@SignedOff402 At night you can back up to a wall close and see the glow. In the day back up to a glass building or window/door and hit the brakes and see it in your mirror. Or set a heavy thing on the brake pedal.

@SeanBZA 2 жыл бұрын

@@SignedOff402 Back up to a wall at night, and look in the mirrors.

@4uidrum Жыл бұрын

Thank you! Helped a bunch! \m/ :) \m/

@MIkeDeltaVictor 2 жыл бұрын

Sorry for hijacking the wrong video but this one is current. Lol I have an actuator problem. First question, why is it recommended to not plug in the actuator before you install? I have 2 05 Yukons and an 03 which have similar parts. So the actuator in the 03 was working but the compressor clutch was not engaging. I swapped the pressure switch and I know it's not that. The 05 had cold air on passenger and back but driver is stuck. I pulled off actuator from 03 and placed it in 05 and it spun closed and did not move after that. I put back in 03 and it didnt do anything until I used vice grips to spin it back to the middle. Now its semi erratic in its movement. Then back to 05 and again, spun closed/to heat. Help! Lol

@ericg3065 Жыл бұрын

Thanks I would have never figured that out

@ts-vu3dd 2 жыл бұрын

Brian!!!!! I need some help. I having a very odd issue with my Subaru.

@rheidtech 2 жыл бұрын

Have you dealt with pilot plate lights? Lets just say they make great water storage... #wetniche

@Family1st8689 Жыл бұрын

What year is that Honda Odyssey?

@Don1981 2 жыл бұрын

Long time no see like your vids

@briansmobile1 2 жыл бұрын

Thanks. Life's been pretty tricky lately.

@Don1981 2 жыл бұрын

@@briansmobile1 yeah its not so good here in the netherlands to dramatic

@FJ80Coop 2 жыл бұрын

Always rub down any new bulbs with alcohol before installing just in case it managed to ger any oil on it from the factory or handling prior to installing...

@rickpaulos Жыл бұрын

how about a vid for a 2007? It's different than this one.

@willhikearizona 2 жыл бұрын

Sorry about your friend.

@willefixit 2 жыл бұрын

hi brian

@briansmobile1 2 жыл бұрын

Hey!

@dynlenoir 2 жыл бұрын

Condolences. 💜

@briansmobile1 2 жыл бұрын

Thanks Dyn

@spacedad1853 8 ай бұрын

You think it's gonna break, then it's just ok. That's my usual experience working on my car.

@Itsa_Mea 2 жыл бұрын

LEDs on everything for me. No more melted sockets and they last longer.

@don7406 2 жыл бұрын

Yup, I could easily break that light. Tricky. Sorry you lost your friend. What is that flying machine called?

@briansmobile1 2 жыл бұрын

Thanks. Paramotor.

@BosllaLighting 2 жыл бұрын

After watching the video on your channel, I found that you are very suitable to promote our headlight bulb. Are you interested in cooperating with us? I have contacted you on IG. Hope you can reply to me, thank you.