I built this out of corrugated plastic & zip ties. It's feather weight, durable, and only cost me $17 at Home Depot www.adj.com/pro-event-table www.homedepot.com/p/72-in-x-36...
Пікірлер: 53
@DJTEDDY5075 жыл бұрын
BSR, you’re the man brother. I have been following your channel since 2010. You always have great ideas. I just bought the ADJ event table. The first thing I did was stop by Home Depot and picked up two pieces corrugated plastic. I placed them in the front and side of the event table. It looks great. I will share them with you. Thanks a lot for the inspiration
@WeddingDJBusiness7 жыл бұрын
That seems to work well and now it's more usable/practical as a DJ booth stand.
@Richardcecker7 жыл бұрын
Looks Good Brian. Great Job, and thanks for all of your ideas and tips you have always shared. I appreciate it!
@ksdj17 жыл бұрын
I really like this mod. Very creative Brian!
@thedcbroker72645 жыл бұрын
Totally awesome dude. I set a huge tv on a folding table, used your idea on the outside all the way around the table. Added a color changing light and it looks like a custom lighted tv stand. Awesome!!!!!!!
@angelswithanedge7 жыл бұрын
LOL - and that's why you have your own KZfaq channel! As Howie Darkstar says - NAILED IT! I didn't even think about the plastic. Thank you!
@ckoaks7 жыл бұрын
One thing I really like about this modification is that it can be easily and inexpensively replaced once in inevitably gets scuffed and beat up over time.
@Dj2wise16 жыл бұрын
Hi Brian thanks again for sharing your amazing ideas man! You're awesome
@fotolocmomluv5 ай бұрын
This is still very helpful today (2024). Thank you!
@MrLivewire19707 жыл бұрын
You can also use stainless steel zip ties. Those can be found at Home Depot too.
@joshbradbury41487 жыл бұрын
looks good, looks like the liteconsole similar idea
@chachistef7 жыл бұрын
Fast and easy! Great touch!
@billocampo13656 жыл бұрын
That looks a lot better !!
@ate-up7 жыл бұрын
cool thought on the board, I'm waiting to see if and when you'll add that monitor in place of the adj logo. that might be my deciding factor lol. thx bsr
@briansredd7 жыл бұрын
Yeah, next week. Right now, I'm so behind. Got to prep for tomorrow's wedding & have company coming Sunday. It's going to have to wait
@Bigshowdiscooxford6 жыл бұрын
I just got the pro event table 2, if I can find the material I and to do this but split in 2 halves, thanks for the video Brian
@Djtonydraper7 жыл бұрын
Great job ..
@timtimbohughes40606 ай бұрын
Great idea, have done something similar with my booth after watching this video😋
@tdiddy89266 жыл бұрын
Brilliant my boy
@ReverendHellbilly2 жыл бұрын
I like it. Good job.
@djmaxxsaint6 жыл бұрын
Great video man. Is the tabletop table height or counter height?
@danquay95043 жыл бұрын
Great table, stand, I’m just curious what material is made out of & what is the dimensions, height vs width and depth, & cost this be idea 💡 for my live-streams?
@fedscame7 жыл бұрын
what a great idea
@MndScream7 жыл бұрын
Smart. This is the stuff you won me over with and what I keep coming back for. Thanks BSR! oh and I appear to be first (=
@impdj7 жыл бұрын
BSR = DJ genius!
@ThomasGrillo7 жыл бұрын
Brian, I really like the idea of the corrugated board! I wonder how it'll look if you use a microgobo laser in there? Thanks for sharing this inexpensive, and practical solution with us. :)
@FreakinAwesome6 жыл бұрын
Do you think my DDJ RZ in a flight case will fit on this? The flight case has a sliding laptop tray.
@djblack12046 жыл бұрын
How can four people dislike this! Haters! this video is awesome!
@LioSintra6 жыл бұрын
Nice idea. I didnt like the front open. That way its possible to hide some bags inside. Thanks for the vídeo 😉
@tdiddy89266 жыл бұрын
I have a question!? I have a ddj sx2 in an odyssey flight case,, the laptop tray slides out and extends exposing the controller! Is the table top big enough or would I have to take the slider off and go with a traditional laptop stand? Or I was thinking 🤔 💭I could modify the table cutting the only the part that would get in the way of laptop tray on the flight case. Any thoughts? If cutting was needed I’m pretty confident in doing it. I’m a collision tech and pretty good at fabrication
@RobOBrienMedia7 жыл бұрын
looks cool Brian, I use my controller (Pioneer DDJ SX2) in a flight case with a slide back laptop shelf... guessing it wouldn't fit on the shelf of this stand that way
@briansredd7 жыл бұрын
Don't know why it wouldn't. The SX stuff isn't that big. You could pit an SZ on this
@djandrethedoc6 жыл бұрын
I was wondering the same. Seems the depth/width isn't the issue but rather the clearance for the built-in sliding laptop shelf. Looking for someone that is using a flight case on this to confirm.
@jdm2340 Жыл бұрын
Brian, why did you stop using the frosted screen mod? I'm looking at buying a mb event table but looking for ideas on cable management. Cheers 👍
@djscottyd85397 жыл бұрын
nice one 👍
@kushalgossai4097 жыл бұрын
Hey Brian, can you see if you can mount a little tv or monitor in that cut out where the sign is??
@briansredd7 жыл бұрын
You've got to wait until next week
@michaelbeneux88896 жыл бұрын
Respect
@greenkarmaweddings55674 жыл бұрын
Your a Genius!! Thanks!
@cgdjevents3 жыл бұрын
I ALSO HAVE THIS TOO
@1260brighteyes3 жыл бұрын
I like this
@cgdjevents3 жыл бұрын
NICE...BRO
@howiedarkstar7 жыл бұрын
Nail it!
@dj_2night2 жыл бұрын
nice
@angelswithanedge7 жыл бұрын
Brain - carrying bag/case?
@briansredd7 жыл бұрын
nope
@mostamazingmatt7 жыл бұрын
No one complained about the massive ugly as it gets ADJ logo?
@briansredd7 жыл бұрын
You can flip it to white, or with this integrated façade, you can just remove it if you like
@Cardinalent7 жыл бұрын
Hey. For all that posted about the ugly adj logo. It comes out. I believe this was the company's way of giving a simple suggestion on where you could put your own logo. Just sayin.
@juanmiguelortizlapaz99154 жыл бұрын
I think that this table have a big potential, I´ve seen in real life, and it´s a nice table!