Brick Facade with Grasshopper (MVRDV)

No video

Brick Facade with Grasshopper (MVRDV)

Рет қаралды 18,914

How to Rhino

Күн бұрын

Пікірлер: 23

@HowtoRhino 3 жыл бұрын

Free How to Rhino Community 👉 www.skool.com/howtorhino Rhino for Architects Course ✔ howtorhino.com/rhino-for-architects-course/ Extended Tutorial + Extra Project Files 👉 www.patreon.com/posts/49228239 KZfaq Tutorial + Project Files 👉 www.patreon.com/posts/49229348

@justalex961 3 жыл бұрын

sometimes, the bricks are the same size just layed once on the long side and once on the shortside, and when placed on the long side two bricks are used so that the width is the same as a brick layed on the shortside, its cheaper than buying 2 different sets of bricks :)

@torenur383 3 жыл бұрын

Thank you! That’s what I tried to google today 😄

@HowtoRhino 3 жыл бұрын

You're welcome Tore! Perfect timing 😄 Thanks for checking us out.

@juandangavera 3 жыл бұрын

This is great, thank you very much for the tutorial

@HowtoRhino 3 жыл бұрын

Thanks Juan! Glad you're liked it :)

@basmax4432 2 жыл бұрын

Thank you for this great tutorial !! Very detailed and helped me out a lot 🙏🏼🙏🏼, I have a small problem I wonder if there is a solution to it; instead of using this on a plane wall, I would like to use it on a curved wall/ surface. Do you have any idea what I can change in the algorithm to make that happen ?

@AlexLopez-ww2od Ай бұрын

Can I bring this into revit?

@studio22a34 3 жыл бұрын

At the beginning you say the normal brick is in 2 sizes (normal brick & double brick). I just want to clarify that it isn't a double brick, those smaller bricks are just a normal brick turned 90 degrees & the longer brick is placed normally. This is because the brick wall has 2 layers of bricks so every other course they will lay out the bricks turned 90 degrees to structurally tie the wall together.

@HowtoRhino 3 жыл бұрын

I am afraid you're mistaken. Please check the pictures about this project on archdaily website and you will get the idea how it's made: www.archdaily.com/785923/crystal-houses-mvrdv/5717988fe58ece9e0b00011f-crystal-houses-mvrdv-photo?next_project=no

@TinaQi 7 ай бұрын

what @studio22a34 meant was that the conventional brick bonding only uses one set of brick dimensions, which is probably true for the actual bricks on top of the glass ones, the custom dimensions shown by the architects are probably only for the glass bricks (since they are unconventional)@@HowtoRhino of course this has no effect on your modelling since the aim is just to replicate the visual appearance.

@brandonsaunders2823 2 жыл бұрын

If you were to render the individual bricks though, a single texture would look flat. How would you give it some natural variation?

@alejandrozuluaga3285 3 жыл бұрын

Great work as always! Thanks for the tutorial. One simple question, do you use an app to take those screenshots and draw on top of them?

@HowtoRhino 3 жыл бұрын

Thank you Alejandro! We use the Lightshot app for Windows. It's very handy for sketching on top of screenshots.

@artemzavyalov6958 2 жыл бұрын

I have a problem to cut openings in a surface: I have a solid surface and a surface with openings. First I set this solid surface and it works correctly till this moment when you start cutting openings…. What do I need to do?

@emmanuelmunoz6997 2 жыл бұрын

I've got the same problem. Where you able to figure it out?

@dh7875 2 жыл бұрын

Hey Artem, were you able to figure it out? im also facing similar issues here, cheers

@emilys.2945 9 ай бұрын

How do you do the syntax part when u are doing the split tree for the contour lines?

@HowtoRhino 9 ай бұрын

You need to take the “Panel” and inside of it type: {0,2,…} Please make sure the data placed in the D input of the Split Tree is simplified (you can enable it on the right click of the input). Hope it helps.