Bright Prints with Ringspun Shirts on the Epson F2100

Bright Prints with Ringspun Shirts on the Epson F2100 - ProDTG Tips

Рет қаралды 1,854

Күн бұрын

Step 3 of 3 to guarantee bright prints on the Epson F2100 is to use a good quality ringspun shirt. - Digital Monday
This video will address the differences in shirts an recommend the best shirts to use.
STEP 1: Ensure you have a perfect nozzle check. Watch this video for maintenance tips.
• Epson F2100 Maintenanc...
STEP 2: Proper pretreat application - • NO MORE Pretreat Stain...
STEP 3: The best kind of shirt when printing with DTG. Watch this video for details and shirt brand recommendations. • Bright Prints with Rin...
Best Shirts for DTG Printing:
Cotton Herritage
Spectra
Fruit of the Loom Soft Spun
Hanes Nano
Just Hoods USA
Next Level
Bella Canvas
For all Epson F2100 ProDTG tips and tricks visit.
www.prodtg.com
0:00 Intro
0:14 3 Steps
0:43 Shirt Choice
2:11 Pretreat Ringspun
2:15 Garment Creator and Print Ringspun
4:14 Pretreat and Print Gildan
6:08 Comparison
7:24 Recap
#EpsonF2100 #HowtoDTG #DTGbestpractices #BrightprintsDTG #EpsonDTG

Пікірлер: 10

@pamelaespinoza7565 3 жыл бұрын

A few questions if you can help us. 1. Are you using a paint brush, a paint roller or nothing to push down the fibers on both of the shirts, after they come out of the pretreating machine? 2. How are you drying the shirts after they come out of the pretreat machine? Are you heat pressing them instantly or are you allowing them to hang dry before Printing on them? I apologize if you have answered these questions in one of your other videos, Thank You in advance.

@MelcoEmbroidery 3 жыл бұрын

Hello. Sometimes I use a paint brush, but it's not necessary. Here is a quick video on how to pretreat properly. kzfaq.info/get/bejne/oLmXm857ubvTgpc.html After they are pretreated I can hang dry the shirt, use a conveyor dryer or use a heat press. If I hang dry usually I brush the shirt first then put a fan on them, 30 minutes later they are typically dry. Remember pretreated shirts must be 100% dry before you can print on them.

@pamelaespinoza7565 3 жыл бұрын

@@MelcoEmbroidery Thank You for your prompt reply. Of course after askiing my questions, I watched your other videos, and they answered my questions. John You the Man!

@valerieguerrero3679 3 ай бұрын

hello, how long did you heat press for and what was temp you used?

@MelcoEmbroidery 3 ай бұрын

I generally heat press for 110 seconds at 350 degrees with no pressure.

@dtgking2244 3 жыл бұрын

Where do you get your ringspun?

@MelcoEmbroidery 3 жыл бұрын

I like Cotton Heritage, Spectra, which are purchased direct from the manufacturer. Go to their website and sign up for an account. Sanmar Fan Favorite, Next Level, etc, those can be purchased through wholesale distributers like Sanmar.